journal article·2019-06Open access

Influence of slenderness ratio on the structural performance of lightweight foam concrete composite panel

Y.H. Mugahed Amran, Rayed Alyousef, Hisham Alabduljabbar, Fahed Alrshoudi, Raizal S.M. Rashid

Abstract

In this research paper is reported the analytical and experimental investigations on the influence of slenderness ratio on the structural performance of lightweight foam concrete composite panel (LFCCP). Six full-scale tests of LFCCP panels differing in thickness were implemented under compression load. Compression load strength, load-strain profiles, load-deflection curves, influence of slenderness ratio, deformation, cracking patterns and classic modes of failure under incremental compression loads were analysed and deliberated. Nonlinear finite element modeling (FEM) using commercial software named LUSAS was used to simulate the structural behavior of LFCCP. The calculated ultimate compression strength capacity using empirical formulas established by many researchers, to expect the ultimate strength capacity of composite LFCCP panels were in comparison with the laboratory test results and FEM data attained; thus, a substantial agreement with the FEM data that were obtainable with a reasonable degree of accuracy, presented the increase in slenderness function.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Masonry and Concrete Structural Analysis · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Structural performance of 3-D sandwich panels under shear and flexural loading
2. Response of pre-cast reinforced composite sandwich panels to axial loading10.1016/j.conbuildmat.2005.12.011 ↗
3. Flexural behaviour of pre-cast concrete sandwich composite panel–Experimental and theoretical investigations10.1016/j.conbuildmat.2006.11.023 ↗
4. AAC-concrete light weight precast composite floor slab
5. Structural behavior of composite sandwich slab panels
6. Experimental tests and numerical modelling of wall sandwich panels10.1016/j.engstruct.2011.12.027 ↗
7. Experimental evaluation of the composite behavior of precast concrete sandwich wall panels10.15554/pcij.03012003.54.71 ↗
8. Einea · 1992
9. Full scale testing of precast concrete sandwich panels
10. Insulated wall panels-Interface shear transfer10.15554/pcij.05011998.98.101 ↗
11. A new structurally and thermally efficient precast sandwich panel system10.15554/pcij.07011994.90.101 ↗
12. In-plane shear behavior of insulated precast concrete sandwich panels reinforced with corrugated GFRP shear connectors10.1016/j.compositesb.2015.04.056 ↗
13. Theoretical and experimental study on precast reinforced concrete wall panels subjected to shear force10.1016/j.engstruct.2014.09.019 ↗
14. Flexural behavior of composite precast concrete sandwich panels with continuous truss connectors10.15554/pcij.03011994.112.121 ↗
15. Design and analysis of precast, prestressed concrete, three-wythe sandwich wall panels10.15554/pcij.07012007.70.83 ↗
16. Experimental evaluation of precast, prestressed concrete, three-wythe sandwich wall panels10.15554/pcij.03012008.95.115 ↗
17. Behaviour of precast reinforced concrete sandwich panels with continuous shear truss connectors
18. The structural performance of precast lightweight foam concrete sandwich panel with single and double shear truss connectors subjected to axial load
19. Mechanical properties of 3D wall panels under shear and flexural loading
20. Precast concrete sandwich wall panels: state of the art of precast/prestressed sandwich wall panels10.15554/pcij42.2-05 ↗
21. A new structurally and thermally efficient precast sandwich panel system10.15554/pcij.07011994.90.101 ↗
22. Full scale testing of precast concrete sandwich panels
23. Behaviour of precast reinforced concrete sandwich panels with continuous shear truss connectors
24. State-of the-art of precast concrete sandwich panels10.15554/pcij.11011991.78.98 ↗
25. Fragmentation issue in Malaysian industrialised building system (IBS) projects
26. Mugahed Amran · 2016
27. Noridah · 2010
28. Testing of precast lightweight foamed concrete sandwich panel with single and double symmetrical shear truss connectors under eccentric loading
29. Mindess · 2014
30. Building code requirement for reinforced concrete (ACI318-89)
31. Interesting aspect of the empirical wall design equation
32. British Standards Institution. Structural use of concrete–Part 1 · 1997
33. Response of precast foamed concrete sandwich panels to flexural loading10.1016/j.jobe.2016.06.006 ↗
34. Experimental research on properties of high-strength foamed concrete10.1061/(ASCE)MT.1943-5533.0000353 ↗
35. LUSAS finite element system · 2000
36. Properties and applications of foamed concrete; a review10.1016/j.conbuildmat.2015.10.112 ↗
37. Structural behaviour of composite sandwich panels with plain and fibre-reinforced foamed concrete cores and corrugated steel faces10.1016/j.compstruct.2011.12.017 ↗
38. Structural performance of lightweight steel-foamed concrete–steel composite walling system under compression10.1016/j.tws.2010.08.007 ↗
39. Energy absorption during projectile perforation of lightweight sandwich panels with metallic fibre cores10.1016/j.compstruct.2010.09.019 ↗
40. Structural feasibility of Expanded Polystyrene (EPS) based lightweight concrete sandwich wall panels10.1016/j.conbuildmat.2017.02.027 ↗
41. Experimental and analytical study of carbon fiber-reinforced polymer (FRP)/autoclaved aerated concrete (AAC) sandwich panels10.1016/j.engstruct.2009.05.009 ↗
42. Sumadi · 2008
43. Sarawak peat characteristics and heat treatment
44. Tropical peat and its geotechnics