journal article·2025-07Open access

Interface structure between coal gangue ceramsite and cement matrix

Tianyu Han, Renliang Shan, Guoye Jing, Weiping Zhao, Zhenyu Xu, Dongjie Qiao, Haotian Wu

Abstract

Due to the shortage of sand and gravel in the construction industry and the growing accumulation of coal gangue in the coal industry, using coal gangue ceramsite (CGC) as the coarse aggregate for concrete presents a new approach for resource utilization. This study aims to investigate the interface between CGC and cement matrix. First, the reactivity of raw coal gangue aggregate (CGA raw ) and CGC was analyzed, revealing that the pozzolanic activity of the Al and Si elements in CGC was higher than that of CGA raw . CGC exhibited relatively high cylinder compressive strength compared to other lightweight aggregates. The impact of varying CGC contents on the physical, mechanical, and microstructural properties of concrete was characterized by various methods. Additionally, a modification mechanism of CGC on interface structure was determined. The result indicated that as the CGC content ranged from 0 % to 100 %, the cube compressive strength decreased by 15.04 %, the oven-dry density decreased by 18.07 %, the microhardness of the ITZ increased from 52.12 HV to 106.76 HV, and the thickness of the ITZ decreased from 47.23 μm to 17.21 μm. The activated SiO 2 and Al 2 O 3 on the surface layer of CGC reacted with calcium hydroxide during secondary hydration, producing needle-like ettringite (Aft) crystals and flocculent C-S-H gel, which enhanced the bond between the cement matrix and CGC. Considering the secondary hydration of CGC, the oven-dry density formula was modified by genetic algorithm. Additionally, coal gangue ceramsite lightweight high-strength concrete was determined as green concrete by a specific CO 2 intensity index. This study could offer technical support for utilizing CGC in the high-strength concrete industry.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (85)

Show source-provided references
1. Use of recycled plastic as fine aggregate in cementitious composites: a review10.1016/j.conbuildmat.2020.119146 ↗
2. Time is running out for sand10.1038/d41586-019-02042-4 ↗
3. A looming tragedy of the sand commons10.1126/science.aao0503 ↗
4. Development and characteristics of novel high-strength lightweight core-shell aggregate10.1016/j.conbuildmat.2023.132080 ↗
5. Factors affecting brittleness behavior of coal-gangue ceramsite lightweight aggregate concrete10.3389/fmats.2020.554718 ↗
6. Environmental hazards and comprehensive utilization of solid waste coal gangue10.1016/j.pnsc.2024.02.012 ↗
7. Source-specific ecological risk analysis and critical source identification of heavy metal(loid)s in the soil of typical abandoned coal mining area10.1016/j.scitotenv.2024.174506 ↗
8. Leaching characteristics and pollution risk assessment of potentially harmful elements from coal gangue exposed to weathering for different periods of time10.1007/s11356-023-26525-0 ↗
9. China Photo Network, Aerial photo of excavation and transportation excavator construction in sand and gravel mining. 〈https://699pic.com/video-3528605.html〉, 2024 (accessed 13 March 2024).
10. Safety Inspection in Fuxing District, Handan Municipal Government in China. 〈https://www.hdfx.gov.cn/fxqxxgk/bmxx/zfxt/qyjglj/202304/t20230418_1862074.html〉, 2023 (accessed 13 March 2024).
11. Analytical evaluation of stress–strain behavior of rubberized concrete incorporating waste tire crumb rubber10.1016/j.jclepro.2024.141963 ↗
12. Engineering properties of sustainable green concrete incorporating eco-friendly aggregate of crumb rubber: a review10.1016/j.jclepro.2021.129251 ↗
13. Comparison of waste photovoltaic panel processing alternatives in Australia10.1016/j.jclepro.2023.138128 ↗
14. A fine-segmentation algorithm for XCT images of multiphase composite building materials based on deep learning
15. Insight into the fracture mechanical properties of the interfacial transition zone of cemented coal gangue backfill under different stress angles by mesoscopic digital image correlation10.1016/j.engfracmech.2024.109988 ↗
16. Preparing shotcrete materials applied to roadways using gangue solid wastes: influences of mix proportions of materials on the mechanical properties10.3390/app14104060 ↗
17. Study of mechanics and durability of non-spontaneous combustion coal gangue coarse-aggregate high-performance concrete10.3390/ma17071534 ↗
18. Study on mechanical properties and constitutive relationship of steel fiber-reinforced coal gangue concrete after high temperature10.3390/buildings14061791 ↗
19. Experimental and mesoscopic simulation study of size effect on splitting tensile performance of spontaneous combustion coal gangue concrete
20. Engineering properties of lightweight aggregate concrete containing limestone powder and high volume fly ash10.1016/j.jclepro.2016.06.082 ↗
21. Valorization of calcined coal gangue as coarse aggregate in concrete10.1016/j.cemconcomp.2021.104057 ↗
22. Preparation of high-strength ceramsite from coal gangue and printing and dyeing sludge: design strategy and modelling mechanism10.1016/j.ceramint.2024.03.122 ↗
23. Preparation and alkali excitation mechanism of coal gangue-iron ore tailings non-sintering ceramsite10.1016/j.conbuildmat.2024.136209 ↗
24. Effect of freeze-thaw cycle and moisture content on compressive and energy properties of alkali slag ceramsite concrete10.1007/s12205-024-1757-1 ↗
25. Lightweight ceramsite made of recycled waste coal gangue & municipal sludge: particular heavy metals, physical performance and human health10.1016/j.jclepro.2022.134309 ↗
26. Shrinkage and strength properties of coal gangue ceramsite lightweight aggregate concrete10.1155/2020/3575709 ↗
27. Preparation of coal gangue ceramsite high-strength concrete and investigation of its physico-mechanical properties10.1038/s41598-022-20940-y ↗
28. Factors affecting brittleness behavior of coal-gangue ceramsite lightweight aggregate concrete10.3389/fmats.2020.554718 ↗
29. Effect of capillary water absorption on electrical resistivity of concrete with coal gangue ceramsite as coarse aggregates
30. Study on the performance of coal gangue ceramsite steel fiber high strength concrete
31. Study on the mechanical behavior and micro-mechanism of concrete with coal gangue fine and coarse aggregate10.1016/j.conbuildmat.2022.127626 ↗
32. Effects of chemistry and mineral on structural evolution and chemical reactivity of coal gangue during calcination: towards efficient utilization10.1617/s11527-014-0353-0 ↗
33. Manufacturing ultra-high performance geopolymer concrete (UHPGC) with activated coal gangue for both binder and aggregate10.1016/j.compositesb.2024.111723 ↗
34. Common portland cement (GB175-2007), Ministry of Construction of the People's Republic of China, Beijing, 2007.
35. Concrete admixtures (GB8076-2008), Ministry of Construction of the People's Republic of China, Beijing, 2008.
36. Pebble and crushed stone for construction (GB/T 14685-2022), Ministry of Construction of the People's Republic of China, Beijing, 2022.
37. Research progress in the performance and enhancement of coal gangue concrete
38. Relation of chemical properties to the bloating of clays10.1111/j.1151-2916.1951.tb11619.x ↗
39. Sand for construction (GB/T 14684-2022), Ministry of Construction of the People's Republic of China, Beijing, 2022.
40. Research on cementitious behavior and mechanism of pozzolanic cement with coal gangue10.1016/j.cemconres.2004.11.004 ↗
41. Activity of calcined coal gangue fine aggregate and its effect on the mechanical behavior of cement mortar10.1016/j.conbuildmat.2015.09.050 ↗
42. BS EN 206-1:2000, Concrete–Part 1: Specification, performance, production and conformity, British Standards Institution, UK, London (2000).
43. Standard for test method of mechanical properties On ordinary concrete(GB/T 50081-2019), Ministry of Construction of the People's Republic of China, Beijing, 2019.
44. Dimensional effect of cubic compressive strength of high strength concrete
45. B.E. 13055-1, Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout, 2002.
46. Improvement of core–shell lightweight aggregate by modifying the cement–EPS interface10.3390/ma16072827 ↗
47. Lightweight aggregates and its test methods - Part 2: Test methods for lightweight aggregates (GB/T 17431.2-2010). Ministry of Construction of the People's Republic of China, Beijing, 2022.
48. The performances of the baking-free bricks of non-sintered wrap-shell lightweight aggregates from dredged sediments10.1016/j.conbuildmat.2019.117587 ↗
49. Master, Northeastern University
50. Collaborative recycling of red mud and FGD-gypsum into multi-shell cold bonded lightweight aggregates: synergistic effect, structure design and application in sustainable concrete10.1016/j.conbuildmat.2023.131134 ↗
51. Safety and environmental protection application of high performance solid waste unburned ceramsite and its lightweight high strength concrete
52. Properties of artificial lightweight aggregates prepared from coal and biomass co-fired fly ashes and sewage sludge fly ash10.1016/j.ceramint.2024.05.172 ↗
53. Biochar-enabled carbon negative aggregate designed by core-shell structure: a novel biochar utilizing method in concrete10.1016/j.conbuildmat.2024.138507 ↗
54. Preparation and properties of lightweight and high-strength loess ceramisite
55. Autogenous shrinkage of high strength lightweight aggregate concrete
56. Self-compacting lightweight concrete produced with expanded clay aggregate10.1016/j.conbuildmat.2012.04.111 ↗
57. Lightweight concrete with aggregates made by using industrial waste
58. Bond behavior between lightweight aggregate concrete and normal weight concrete based on splitting-tensile test10.1016/j.conbuildmat.2019.03.125 ↗
59. Mechanical properties and microstructure of lightweight aggregate concrete with and without fibers10.1016/j.conbuildmat.2018.12.037 ↗
60. Properties of lightweight aggregate concrete reinforced with carbon and/or polypropylene fibers10.3390/ma13030640 ↗
61. Experimental study of high-strength steel fiber lightweight aggregate concrete on mechanical properties and toughness index10.1155/2020/5915034 ↗
62. Experimental study on static and dynamic mechanical properties of steel fiber reinforced lightweight aggregate concrete
63. Properties of self-compacting lightweight concrete reinforced with steel and polypropylene fibers10.1016/j.conbuildmat.2019.07.306 ↗
64. High strength flowable lightweight concrete incorporating low C3A cement, silica fume, stalite and macro-polyfelin polymer fibres
65. Water absorption in internally cured mortar made with water-filled lightweight aggregate10.1016/j.cemconres.2009.06.009 ↗
66. Properties and internal curing of concrete containing recycled autoclaved aerated lightweight concrete as aggregate10.1155/2017/2394641 ↗
67. Effect of internal curing on behavior of high performance concrete: an overview
68. Influence of aggregate pre-wetting and fly ash on mechanical properties of lightweight concrete10.1016/j.wasman.2003.06.003 ↗
69. Neville A.M., Properties of concrete, fourth ed, England,1996.
70. BS EN 1992-1-1 · 2004
71. The influences of metakaolin, w/b ratio and fibers on the properties of green-HFLWC10.1016/j.conbuildmat.2022.129664 ↗
72. Study on the impact of HTPP fibers on the mechanical properties of ceramsite concrete
73. General relationship between strength and hardness10.1016/j.msea.2011.08.061 ↗
74. Influence of moisture states of natural and recycled aggregates on the slump and compressive strength of concrete10.1016/S0008-8846(03)00186-8 ↗
75. Use of porous ceramic waste aggregates for internal curing of high-performance concrete10.1016/j.cemconres.2009.01.007 ↗
76. Influence of aggregate size, water cement ratio and age on the microstructure of the interfacial transition zone10.1016/S0008-8846(03)00205-9 ↗
77. Effect of silica fume and SBR latex on the pasteaggregate interfacial transition zone10.1590/S1516-14392007000100018 ↗
78. Microstructures and microchemistry of the paste-aggregate interfacial transition zone of high-performance concrete10.1680/adcr.1998.10.1.33 ↗
79. Monteiro · 1988
80. Monteiro · 1985
81. Effect and mechanism of coal gangue concrete modification by fly ash10.1016/j.conbuildmat.2021.123563 ↗
82. Development and prospectives of lightweight high strength concrete using lightweight aggregates10.1016/j.conbuildmat.2022.129628 ↗
83. Measuring the eco-efficiency of cement use10.1016/j.cemconcomp.2010.07.009 ↗
84. Green concrete with high-volume fly ash and slag with recycled aggregate and recycled water to build future sustainable cities10.1061/(ASCE)MT.1943-5533.0001748 ↗
85. Carbon dioxide equivalent (CO2-e) emissions: a comparison between geopolymer and OPC cement concrete10.1016/j.conbuildmat.2013.01.023 ↗