journal article·2025-07Open access

Non-destructive evaluation of bond strength between epoxy repair material and concrete under wet surface

Jianhui Tang, Yin Bai, Wenxun Qian, Penggang Lv

Abstract

The bond strength between epoxy repair materials and concrete is significantly influenced by surface moisture and roughness, leading to increased variability in bond strength measurements. Traditional pull-off tests, while commonly used, are destructive and inefficient. This study introduces a novel framework integrating three-dimensional morphology analysis, ultrasonic pulse velocity (UPV), and artificial neural networks (ANNs) to predict bond strength under wet conditions. Four concrete substrates (Surfaces I–IV) with increasing roughness were prepared, and 23 surface roughness parameters were obtained by three-dimensional scanning technology. The wave velocity and amplitude parameters of epoxy repair material-concrete were obtained through UPV method. The bonding strength was obtained by pull-off method. Based on Levenberg-Marquardt (LM), Broyden-Fletcher-Goldfarb-Shanno (BFGS) and Bayesian regularization (BR) ANN training algorithms, the nondestructive evaluation models of epoxy repair material-concrete bonding strength under wet surface considering roughness and acoustic parameters were constructed. The results revealed a 38.6% increase in bond strength from 2.16 MPa (Surface I) to 3.11 MPa (Surface IV), accompanied by 8.3% and 7.7% reductions in ultrasonic wave velocity (5.36 → 4.91 km/s) and amplitude (102.6 → 94.8 dB), respectively. Among 23 surface parameters, root mean square slope ( S dq ) and interface expansion area ratio ( S dr ) showed the strongest correlation with bond strength ( ρ =0.91 and ρ =0.90, Spearman rank). The BFGS algorithm achieved the highest prediction accuracy, with a correlation coefficient ( R ) of 0.89 and a mean absolute percentage error (MAPE) of 6.09%, while the BR model exhibited superior stability (MAPE = 6.08%, standard deviation = 0.12 MPa). This work provides the first systematic integration of 3D surface and acoustic properties for non-destructive bond strength evaluation in wet conditions, offering actionable solutions for optimizing epoxy repairs in moisture-prone environments. • 23 parameters of concrete surface roughness are got by three-dimensional scanner. • Ultrasonic velocity of epoxy-concrete negatively correlate with interface roughness. • Broyden-Fletcher-Goldfarb-Shanno algorithm predicts bond strength most accurately. • Bayesian regularization neural network provides stable bond strength predict results. • Chiseling concrete's surface boosts the wet bond strength of epoxy repair material.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Preparation and performance study of rapid repair epoxy concrete for bridge deck pavement10.3390/ma17112674 ↗
2. Effect of nano-SiO2 and sulfate solutions curing on bond strength of GGBFS-based geopolymer repairing mortar10.1016/j.conbuildmat.2024.136778 ↗
3. Preparation technology and experimental study of fast-hardening UHPC repair material10.3390/buildings14072124 ↗
4. Review of factors affecting bond strength between ultra-high-performance concrete and normal strength substrate10.1016/j.conbuildmat.2024.137416 ↗
5. Multi-sensor evaluation of the concrete within the interlayer bond with regard to pull-off adhesion10.1016/j.acme.2017.09.008 ↗
6. On the ultrasonic assessment of adhesion between polymer coating and concrete substrate10.1016/j.cemconcomp.2006.02.017 ↗
7. A. Garbacz, Application of stress based NDT methods for concrete repair bond quality control, (2015). https://doi.org/10.1515/bpasts-2015-0009.10.1515/bpasts-2015-0009 ↗
8. On the evaluation of interface quality in concrete repair system by means of impact-echo signal analysis10.1016/j.conbuildmat.2016.12.064 ↗
9. Ultrasonic pulse velocity evaluation of the pull-off adhesion between epoxy resin and concrete substrate10.4028/www.scientific.net/KEM.728.390 ↗
10. Adhesion assessment between concrete layers using the ultrasonic pulse velocity method10.4028/www.scientific.net/AMM.797.145 ↗
11. Combined non-destructive testing (NDT) method for the evaluation of the mechanical characteristics of ultra high performance fibre reinforced concrete (UHPFRC)10.1016/j.conbuildmat.2016.11.068 ↗
12. Prediction of characteristics of cement stabilized earth blocks using non-destructive testing: ultrasonic pulse velocity and electrical resistivity10.1016/j.mtla.2023.101794 ↗
13. Non-destructive identification of pull-off adhesion between concrete layers10.1016/j.autcon.2015.06.004 ↗
14. The effect of texturing of the surface of concrete substrate on the pull-off strength of epoxy resin coating10.3390/coatings9020143 ↗
15. Early-age tensile bond characteristics of epoxy coatings for underwater applications10.3390/coatings9110757 ↗
16. Effect of impact treatment methods with different energy and frequency on roughening and tensile bond of concrete-concrete interfaces10.1016/j.conbuildmat.2024.135677 ↗
17. The influence of roughness and bond area size on bond shear performance between UHPC and normal strength concrete10.1016/j.conbuildmat.2024.138203 ↗
18. Method for determining the parameters of surface roughness by usage of a 3D scanner10.1016/j.acme.2012.03.007 ↗
19. The relationship between substrate roughness parameters and bond strength of ultra high-performance fiber concrete10.1080/01694243.2012.761543 ↗
20. Usefulness of 3D surface roughness parameters for nondestructive evaluation of pull-off adhesion of concrete layers10.1016/j.conbuildmat.2015.03.014 ↗
21. Evaluation of the height 3D roughness parameters of concrete substrate and the adhesion to epoxy resin10.1016/j.ijadhadh.2015.12.019 ↗
22. Artificial neural networks for non-destructive identification of the interlayer bonding between repair overlay and concrete substrate10.1016/j.advengsoft.2020.102769 ↗
23. Non-destructive neural identification of the bond between concrete layers in existing elements10.1016/j.conbuildmat.2016.09.146 ↗
24. Bond properties of steel bar in concrete under water Environment10.3390/ma12213517 ↗
25. Experimental investigation of the interfacial bonding properties between polyurethane mortar and concrete under different influencing factors10.1016/j.conbuildmat.2023.133800 ↗
26. Tensile bonding strength of epoxy coatings to concrete substrate10.1016/j.cemconres.2004.06.035 ↗
27. Adhesion of repair systems to concrete: influence of interfacial topography and transport phenomena10.1680/macr.2005.57.5.273 ↗
28. Effect of moisture exchange on interface Formation in the repair system studied by x-ray absorption10.3390/ma9010002 ↗
29. Recent developments in experimental and computational studies of hygrothermal effects on the bond between FRP and concrete10.1177/0731684420912332 ↗
30. Effects of water exposure on the interfacial bond between an epoxy resin coating and a concrete substrate10.3390/ma12223715 ↗
31. Tensile bond characteristics between underwater coating materials and concrete substrate10.9765/KSCOE.2018.30.6.298 ↗
32. An investigation of inorganic fillers on rheological properties and tensile strength of epoxy repair coating using mixture design method10.1016/j.conbuildmat.2021.124866 ↗
33. ISO 25178-2:2021 - Geometrical product specifications (GPS) — Surface texture: Areal — Part 2: Terms, definitions and surface texture parameters, (n.d.). 〈https://www.iso.org/standard/74591.html〉 (accessed November 8, 2024).
34. Comprehensive FRP-concrete bond behavior: impact of test methods and the innovative UBoT10.1016/j.compstruct.2024.118475 ↗
35. Experimental and FE analysis of NSM FRP bond in low- and normal-strength natural and recycled aggregate concretes10.1016/j.conbuildmat.2023.132457 ↗
36. Mesh-independent framework for the bidimensional analysis of cfrp-concrete debonding shear tests with discrete fracture10.1061/(ASCE)CC.1943-5614.0001216 ↗
37. Convertible bond test apparatus for EB FRP, NSM FRP, FRCM, and allied systems: proof of concept
38. An analysis of variance test for normality10.1093/biomet/52.3-4.591 ↗
39. A Consistency check of concrete compressive strength using Pearson’s correlation coefficient10.28991/cej-2021-03091672 ↗
40. Artificial neural network model using ultrasonic test results to predict compressive stress in concrete10.12989/cac.2017.19.1.059 ↗
41. Artificial neural network in prediction of mixed-mode I/II fracture load10.1016/j.ijmecsci.2023.108214 ↗