journal article·2025-07Open access

Epoxy emulsion modified geopolymer coating for long-term corrosion protection of steel

Jiandong Zuo, Sitao Luo, Biqin Dong, Guanqi Wei, Yanshuai Wang

Abstract

Corrosion of steel in reinforced concrete usually occurs in marine environment. In this study, the fly ash-slag-based geopolymer coating of steel were modified by the epoxy emulsion (EP) as toughening agent. The influence of different EP contents on the interfacial properties of the coatings was investigated through adhesion test and scanning electron microscope (SEM) analysis. To evaluate the anti-corrosion behavior of the coatings, electrochemical measurement was conducted in five typical simulated solutions for three months. The anti-corrosion performance of the coatings was comprehensively assessed by considering the corrosion morphology and corrosion rate of the coated steel samples. The results demonstrated that the 5 % EP-modified geopolymer coating exhibited superior adhesion and corrosion resistance compared to the steel reinforcement. The rust inhibition mechanism of the modified geopolymer coating can be attributed to the dense structure of the geopolymer and the formation of Mg-Al LDH during the geopolymerization reaction.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Performance evaluation of rebar in chloride contaminated concrete by corrosion rate10.1016/j.conbuildmat.2008.11.003 ↗
2. Corrosion behaviour of P-91 steel and type 316 LN stainless steel with and without a ceramic coating in the lead with oxygen at 550 degrees C10.1016/j.jnucmat.2022.154181 ↗
3. High-velocity oxy-fuel (HVOF) spray coating of inconel, colmonoy, and aluminum on AISI 316L stainless steel: a comparative investigation of the microstructure and corrosion resistance of coatings10.3390/coatings13010204 ↗
4. Microstructural and mechanical characterization of the interface between concrete and chemically reactive enamel (CRE) coated rebar10.1016/j.conbuildmat.2020.120676 ↗
5. Corrosion protection of the reinforcing steels in chloride-laden concrete environment through epoxy/polyaniline-camphorsulfonate nano- composite coating10.1016/j.corsci.2014.10.015 ↗
6. Organic/inorganic hybrid waterborne polyurethane coatings with self-healing properties for anticorrosion application
7. Molecular design and copolymerization to enhance the anti-corrosion performance of waterborne acrylic coatings
8. , A novel geopolymer application: coatings to protect reinforced concrete against corrosion10.1016/j.clay.2016.10.029 ↗
9. A.S. Tomar, R. Gupta, A. Singh, et al., editors. Evaluation of corrosion protective properties of fly ash-red mud based geopolymer coating material for mild steel. International Conference on Emerging Trends in Nanomaterials Science and Technology (ICETNMST), 2022.
10. Geopolymer coating modified with reduced graphene oxide for improving steel corrosion resistance10.1016/j.conbuildmat.2022.127942 ↗
11. Low-carbon high-strength engineered geopolymer composites (HS-EGC) with full-volume fly ash precursor: role of silica modulus10.1016/j.jcou.2024.102948 ↗
12. Chloride induced corrosion in different fly ash based geopolymer concretes10.1016/j.conbuildmat.2018.12.168 ↗
13. Evaluation of the mechanical properties of sea sand-based geopolymer concrete and the corrosion of embedded steel bar10.1016/j.conbuildmat.2018.02.169 ↗
14. Permeability indices and corrosion resistance of geopolymer and Portland cement concretes10.1680/jmacr.17.00151 ↗
15. Chloride transport and the resulting corrosion of steel bars in alkali activated slag concretes10.1617/s11527-015-0747-7 ↗
16. Potential application of geopolymers as protection coatings for marine concrete I. Basic properties10.1016/j.clay.2010.01.014 ↗
17. Potential application of geopolymers as protection coatings for marine concrete II. Microstructure and anticorrosion mechanism10.1016/j.clay.2010.04.024 ↗
18. Potential application of geopolymers as protection coatings for marine concrete III. Field experiment10.1016/j.clay.2012.05.008 ↗
19. Synthesis and characterization of alkali-activated loess and its application as protective coating10.1016/j.conbuildmat.2021.122631 ↗
20. Corrosion and fire protective behavior of advanced phosphatic geopolymeric coating on mild steel substrate10.1007/s12633-019-00153-1 ↗
21. Mechanical properties of ambient cured high strength hybrid steel and synthetic fibers reinforced geopolymer composites10.1016/j.cemconcomp.2017.10.011 ↗
22. Coating performance, durability and anti-corrosion mechanism of organic modified geopolymer composite for marine concrete protection10.1016/j.cemconcomp.2022.104495 ↗
23. ASTM D3359-17: Standard test methods for rating adhesion by tape test, 2017.
24. GB/T1040.3: Plastics-Determination of tensile properties-Part 3: Test conditions for films and sheets, 2006.
25. Accelerated carbonation testing of alkali-activated binders significantly underestimates service life: the role of pore solution chemistry10.1016/j.cemconres.2012.07.002 ↗
26. Enhancing phosphate adsorption by Mg/Al layered double hydroxide functionalized biochar with different Mg/Al ratios10.1016/j.scitotenv.2016.03.151 ↗
27. Uptake of chloride and carbonate by Mg-Al and Ca-Al layered double hydroxides in simulated pore solutions of alkali-activated slag cement10.1016/j.cemconres.2017.05.015 ↗
28. The performance and mechanism of a Mg-Al double-layer oxide in chloride ion removal from an aqueous solution10.3390/nano12050846 ↗
29. An assessment on the mill scale effects on the electrochemical characteristics of steel bars in concrete under DC-polarization10.1016/j.cemconres.2006.03.015 ↗
30. Dye-surfactant aggregates as corrosion inhibitor for mild steel in NaCl medium: experimental and theoretical studies10.1016/j.jtice.2016.11.014 ↗
31. Oxygen reduction reaction at rust free iron surface in neutral unbuffered chloride solutions10.1016/S0010-938X(01)00078-6 ↗
32. Double-anticorrosion ability of in-situ superhydrophobic MgAl-LDH coating with excellent stability of the corrosion resistance on magnesium alloy AZ3110.1002/maco.202213616 ↗
33. One-pot synthesis of Mg-Al layered double hydroxide (LDH) using MgO and metakaolin (MK) as precursors10.1016/j.clay.2021.106070 ↗