Synergistic impact of temperature and pore saturation on corrosion in carbonated reinforced concrete
Source abstract
Abstract
Carbonation-induced corrosion in reinforced concrete (RC) structures significantly threatens their long-term durability, particularly in lower-strength concrete typical of 1960s-1970s buildings in high temperature regions like Singapore. Despite extensive research on individual factors affecting corrosion, the synergistic effects of temperature and pore saturation remain poorly understood in warmer climates. Current durability assessment tends to overestimate the service life of carbonated RC structures in tropical climates due to incomplete understanding of these combined effects. This study investigates the temperature-pore saturation relationship through systematic experimental variation (0–40 °C, 60–100 % pore saturation) using electrochemical and non-destructive measurements, aiming to develop accurate predictive tools for RC maintenance in tropical climates. Results revealed a critical phenomenon: minimum pore saturation threshold for severe corrosion decreases significantly with increasing temperature. For concrete with a water-to-cement ratio of 0.65, severe corrosion occurred at substantially lower pore saturation levels at higher temperatures, with even lower thresholds for more porous concrete. To translate these findings into practical tools, multiple linear regression analysis yielded predictive equations relating temperature and pore saturation effects to corrosion rates. Analysis also revealed that temperature-dependent corrosion kinetics, rather than concrete drying, predominantly drive the corrosion process at higher temperatures, explaining substantial corrosion activity even at lower pore saturation levels. These findings prompt a fundamental reassessment of models that rely on temperature-independent pore saturation thresholds, as they significantly underestimate corrosion risks in hot climates.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete Corrosion and Durability · Smart Materials for Construction · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. The carbonation of concrete structures in the tropical environment of Singapore and a comparison with published data for temperate climates10.1680/macr.1996.48.177.293 ↗
2. Challenges and opportunities in corrosion of steel in concrete10.1617/s11527-017-1131-6 ↗
3. K. Tuutti, Corrosion of steel in concrete, Division of Building Materials, Swedish Cement and Concrete Research Institute, Stockholm, 1982.
4. Influence of cement type and temperature on the rate of corrosion of steel in concrete exposed to carbonation10.5006/1.3278306 ↗
5. Influence of humidity and temperature on the corrosion of reinforced concrete prisms10.1080/19648189.2012.668004 ↗
6. A prediction method for the corrosion rate of steel rebar in carbonated mortar under variable environmental conditions10.3151/jact.21.611 ↗
7. Factors affecting the corrosion rate of steel in carbonated mortars10.1016/0010-938X(91)90048-T ↗
8. Influence of the degree of pore saturation on the resistivity of concrete and the corrosion rate of steel reinforcement10.1016/0008-8846(93)90102-F ↗
9. The corrosion of steel reinforcement in carbonated concrete under different humidity regimes10.1557/PROC-370-471 ↗
10. Relation between resistivity and corrosion rate of reinforcements in carbonated mortar made with several cement types10.1016/0008-8846(88)90091-9 ↗
11. Maekawa · 2008
12. Electrochemistry and capillary condensation theory reveal the mechanism of corrosion in dense porous media10.1038/s41598-018-25794-x ↗
13. Kinetics of electrochemical dissolution of metals in porous media10.1038/s41563-019-0439-8 ↗
14. Multiscale modeling of steel corrosion in concrete based on micropore connectivity
15. Corrosion rate evolution in concrete structures exposed to the atmosphere10.1016/S0958-9465(01)00026-9 ↗
16. Materials and structures
17. 勝. 永山, 博. 田村, 恭. 谷川, コンクリート中の腐食モニタリング用ミニセンサーの基礎的性能に関する水溶液実験, 日本建築学会構造系論文集 63(510) (1998) 23-28.10.3130/aijs.63.23_4 ↗
18. Carbonation kinetics of a bed of recycled concrete aggregates: a laboratory study on model materials10.1016/j.cemconres.2013.01.005 ↗
19. Experimental study on effects of CO2 concentrations on concrete carbonation and diffusion mechanisms10.1016/j.conbuildmat.2015.06.007 ↗
20. Carbonation of concrete in the tropical environment of Singapore10.1080/19373260701797424 ↗
21. Influential depth by water absorption and surface drying in concrete slabs10.3141/2342-09 ↗
22. Effects of simulated environmental conditions on the internal relative humidity and relative moisture content distribution of exposed concrete10.1016/j.cemconcomp.2010.09.009 ↗
23. ASTM, ASTM C876-15, Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete, 2015.
24. Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method10.1007/BF02483292 ↗
25. ASTM, ASTM G106-89 (2015), Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements, 1989.
26. Application of electrochemical impedance spectroscopy (EIS) to monitor the corrosion of reinforced concrete: a new approach10.1016/j.conbuildmat.2016.02.047 ↗
27. Electrochemical polarization: I. A theoretical analysis of the shape of polarization curves10.1149/1.2428496 ↗
28. Electrochemical performance of corroded reinforced concrete columns strengthened with fiber reinforced polymer10.1016/j.compstruct.2018.09.028 ↗
29. Equivalent circuit for modelling the steel-concrete interface. I. Experimental evidence and theoretical predictions10.1016/S0010-938X(98)00036-5 ↗
30. Reaction model for iron dissolution studied by electrode impedance: I. Experimental results and reaction model10.1149/1.2127401 ↗
31. Investigation of magnesium corrosion in aerated sodium sulfate solution by electrochemical impedance spectroscopy10.1016/0013-4686(90)87043-2 ↗
32. Interpretation of an ‘inductive loop’in the impedance of an oxygen ion conducting electrolyte/metal electrode system10.1016/S0167-2738(01)00832-3 ↗
33. Interpretation of low-frequency inductive loops in PEM fuel cells10.1149/1.2789377 ↗
34. A method for estimating impedance parameters for electrochemical systems that exhibit pseudoinductance10.1149/1.2131363 ↗
35. Gabrielli · 1980 · 120
36. Reaction model for iron dissolution studied by electrode impedance: II. Determination of the reaction model10.1149/1.2127402 ↗
37. Accurate electrochemical measurement of magnesium corrosion rates; a combined impedance, mass-loss and hydrogen collection study10.1016/j.electacta.2013.12.124 ↗
38. Electrochemical impedance spectroscopy (EIS): A review study of basic aspects of the corrosion mechanism applied to steels
39. Unveiling the intricacies of steel corrosion induced by chloride: insights from reactive molecular dynamics simulation10.1016/j.conbuildmat.2024.137839 ↗
40. The mechanism controlling corrosion of steel in carbonated cementitious materials in wetting and drying exposure10.1016/j.cemconcomp.2020.103717 ↗
41. Quantitative measurements of corrosion rate of reinforcing steels embedded in concrete using polarization resistance measurements10.1002/maco.19780290804 ↗
42. Reactive molecular dynamics study on carbon steel corrosion induced by chloride: effects of applied potential and temperature
43. L. Bertolini, R.B. Polder, Concrete resistivity and reinforcement corrosion rate as a function of temperature and humidity of the environment, TNO Report 97-BT-R0574, 1997.
44. Electrochemical impedance spectroscopy10.1038/s43586-021-00039-w ↗
45. Corrosion process of reinforced concrete by carbonation in a natural environment and an accelerated test chamber10.1016/S1452-3981(23)12946-4 ↗
46. Theoretical considerations on the supposed linear relationship between concrete resistivity and corrosion rate of steel reinforcement10.1002/maco.200403841 ↗
47. Relationship between concrete resistivity and corrosion rate–a literature review10.1016/j.cemconcomp.2013.03.019 ↗
48. Corrosion rate of steel in concrete—measurements beyond the tafel law10.1016/j.corsci.2005.06.021 ↗
49. Kinetics of fast electrode reactions10.1021/ja01629a006 ↗