journal article·2025-07Open access

Comparative study on dynamic compressive properties and sustainability assessment of one-part fiber-reinforced geopolymer composites

Hanyuan Shi, Qian Zang, Yingfan Wang, Haimin Qian, Zhouhong Zong, Jingming Cai, Mei Li, Yuanzheng Lin

Abstract

Although geopolymers can significantly reduce carbon dioxide emissions, their widespread application is limited due to the requirement for alkaline activation solutions. The recently developed “one-part geopolymer” overcomes this limitation by using a solid alkaline activator , thereby enhancing construction convenience while maintaining performance comparable to conventional alkaline solution activated geopolymers or cement-based materials. In this study, a split Hopkinson pressure bar (SHPB) was employed to investigate the dynamic properties of one-part fiber-reinforced geopolymer concrete (OP-FRGC), focusing on different types of fibers. The compressive dynamic increase factor (CDIF), energy absorption capacity , and failure modes of OP-FRGC under dynamic loading were analyzed. The results indicate that the incorporation of fibers changes the failure mode of OP-FRGC from brittle to ductile, significantly enhancing its toughness. OP-FRGC exhibited strain rate sensitivity , with the CDIF showing an approximate logarithmic increase with the strain rate . In addition, a comprehensive evaluation of OP-FRGC incorporating different fiber types was conducted, considering mechanical properties, sustainability, and cost. This study offers a useful reference for understanding the dynamic behavior of OP-FRGC, thereby promoting its potential in practical engineering applications .
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Damage behavior of geopolymer composites exposed to elevated temperatures10.1016/j.cemconcomp.2008.08.001 ↗
2. Alkali-activated fly ashes: a cement for the future10.1016/S0008-8846(98)00243-9 ↗
3. Geopolymeric materials prepared using Class F fly ash and elevated temperature curing10.1016/j.cemconres.2004.06.031 ↗
4. Zeolite-geopolymer composite materials: production and characterization10.1016/j.jclepro.2017.09.270 ↗
5. Control of the setting reaction and strength development of slag-blended volcanic ash-based phosphate geopolymer with the addition of boric acid10.1007/s41779-021-00610-4 ↗
6. One-part geopolymer mixes from geothermal silica and sodium aluminate10.1021/ie8006825 ↗
7. Properties and characterization of green one-part geopolymer activated by composite activators10.1016/j.jclepro.2019.02.159 ↗
8. Synthesis and strength optimization of one-part geopolymer based on red mud10.1016/j.conbuildmat.2016.02.099 ↗
9. Synthesis of heat and ambient cured one-part geopolymer mixes with different grades of sodium silicate10.1016/j.ceramint.2014.12.154 ↗
10. Fracture behaviour of heat cured fly ash based geopolymer concrete10.1016/j.matdes.2012.08.005 ↗
11. Alkali-activated concrete: engineering properties and stress–strain behavior10.1016/j.conbuildmat.2015.04.039 ↗
12. Fiber-reinforced geopolymer composites: a review10.1016/j.cemconcomp.2019.103498 ↗
13. Impact behaviours of engineered geopolymer composite exposed to elevated temperatures10.1016/j.conbuildmat.2021.125421 ↗
14. Impact resistance of engineered geopolymer composite (EGC) in cold temperatures10.1016/j.conbuildmat.2022.128150 ↗
15. Low-energy impact behavior of ambient cured engineered geopolymer composites10.1016/j.ceramint.2021.12.133 ↗
16. Experimental studies on behavior of one-part geopolymer composite slabs subjected to blast loading10.1016/j.istruc.2024.106825 ↗
17. Dynamic increase factor(DIF) of concrete with SHPB tests: review and systematic analysis
18. Research on the dynamic compressive test of highly fluidized geopolymer concrete10.1016/j.conbuildmat.2013.06.035 ↗
19. Dynamic properties of PVA short fiber reinforced low-calcium fly ash - slag geopolymer under an SHPB impact load
20. Mechanical properties and behaviour of high-strength plain and hybrid-fiber reinforced geopolymer composites under dynamic splitting tension10.1016/j.cemconcomp.2019.103343 ↗
21. Experimental evaluation of quasi-static and dynamic compressive properties of ambient-cured high-strength plain and fiber reinforced geopolymer composites10.1016/j.conbuildmat.2018.01.166 ↗
22. Effect of recycled polymer fibre on dynamic compressive behaviour of engineered geopolymer composites10.1016/j.ceramint.2022.05.023 ↗
23. Effect of fibre addition on the static and dynamic compressive properties of ambient-cured geopolymer concrete
24. Low-carbon high-strength engineered geopolymer composites (HS-EGC) with full-volume fly ash precursor: role of silica modulus10.1016/j.jcou.2024.102948 ↗
25. Strain-hardening alkali-activated fly ash/slag composites with ultra-high compressive strength and ultra-high tensile ductility10.1016/j.cemconres.2022.107075 ↗
26. Seawater sea-sand engineered geopolymer composites (EGC) with high strength and high ductility10.1016/j.cemconcomp.2023.104998 ↗
27. Fly ash-dominated high-strength engineered/strain-hardening geopolymer composites (HS-EGC/SHGC): influence of alkalinity and environmental assessment10.1016/j.jclepro.2024.141182 ↗
28. Dynamic mechanical properties of one-part ultra-high performance geopolymer concrete
29. Low-velocity impact behavior of one-part engineered geopolymer composite under extreme temperatures10.1016/j.compositesa.2025.108739 ↗
30. Development of alkali activated cementitious material from sewage sludge ash: two-part and one-part geopolymer10.1016/j.jclepro.2022.135547 ↗
31. Comparison of one-part and two-part alkali-activated metakaolin and blast furnace slag10.1007/s40831-022-00606-9 ↗
32. Flexural behaviour of reinforced one-part geopolymer concrete beams
33. Flexural behaviour of one-part fibre-reinforced geopolymer beams
34. One-part alkali-activated materials: a review10.1016/j.cemconres.2017.10.001 ↗
35. Thermoelectric behaviors of fly ash and metakaolin based geopolymer10.1016/j.conbuildmat.2019.117757 ↗
36. Study on the mechanical and thermal properties of one-part geopolymer composite for high performance in energy piles
37. Development of eco-friendly geopolymers with ground mixed recycled aggregates and slag10.1016/j.jclepro.2020.120369 ↗
38. Specimen shape and size effects on the concrete compressive strength under static and dynamic tests10.1016/j.conbuildmat.2017.11.069 ↗
39. Chen · 2011
40. Dynamic compressive behaviour of spiral steel fibre reinforced concrete in split hopkinson pressure bar tests10.1016/j.conbuildmat.2013.07.022 ↗
41. Dynamic compressive test of gas-containing coal using a modified split hopkinson pressure bar system10.1007/s00603-019-01955-w ↗
42. Test of dynamic mechanical properties of ambient-cured geopolymer concrete using split hopkinson pressure bar10.1061/(ASCE)MT.1943-5533.0004074 ↗
43. Experimental study on compressive behavior and failure characteristics of imitation steel fiber concrete under uniaxial load10.1016/j.conbuildmat.2023.132599 ↗
44. Effect of high strain rate on compressive behavior of strain-hardening cement composite in comparison to that of ordinary fiber-reinforced concrete10.1016/j.conbuildmat.2016.12.183 ↗
45. Effect of temperature on the low-velocity impact behaviors of engineered cementitious composite10.1061/JMCEE7.MTENG-15023 ↗
46. Static and dynamic mechanical behavior of engineered cementitious composites with PP and PVA fibers
47. Research progress on the dynamic compressive properties of ultra-high performance concrete under high strain rates10.1016/j.cemconcomp.2021.104258 ↗
48. fib, fib Model Code for Concrete Structures 2010, Ernst & Sohn, Berlin, Germany, 2013.10.1002/9783433604090 ↗
49. Effect of fiber content and fiber length on the dynamic compressive properties of strain-hardening ultra-high performance concrete10.1016/j.conbuildmat.2022.127024 ↗
50. Design, dynamic performance and ecological efficiency of fiber-reinforced mortars with different binder systems: ordinary portland cement, limestone calcined clay cement and alkali-activated slag10.1016/j.jclepro.2022.130478 ↗
51. Mechanical performance, impact behavior and environmental assessment of coal furnace slag based low-carbon ultra-high performance engineered cementitious composites (UHP-ECC)10.1016/j.jclepro.2024.141921 ↗
52. Solid waste-based low-carbon autoclaved aerated concrete: relationship between engineering properties and microstructure
53. Mechanical and self-healing behavior of low carbon engineered cementitious composites reinforced with PP-fibers10.1016/j.conbuildmat.2020.119805 ↗
54. Marceau · 2006
55. TOPSIS and modified TOPSIS: a comparative analysis