A prestressed anchor-grouting reinforcement method based on the novel HFQSME grouting material for deep high-stress fractured rock mass
Source abstract
Abstract
In order to control the surrounding rock of deep high-stress roadways, a new prestressed anchor-grouting reinforcement method was proposed with an engineering background of the 1780 ventilation roadway of Shiyakou Coal Mine. A high-fluidity quick-setting micro-expansion (HFQSME) grouting material had been developed through superplasticizer, accelerator, and expansion agent. The results showed that the optimal ratio of HFQSME grouting material was superfine Portland cement of 95 %, superplasticizer of 0.5 %, accelerator agent of 0.5 %, expansion agent of 5.0 %, and water-binder ratio of 0.4. The fluidity, initial setting time and expansion rate of the grouting material were 47 cm, 41 minutes and 0.12 %, respectively. The grouting reinforcement effect of superfine slurry and HFQSME grouting material on rock mass with different degrees of fragmentation was investigated. The peak strength of rock mass with two degrees of fragmentation reinforced by HFQSME grouting material was 166 % and 233 % higher than that of superfine slurry. The macro reinforcement effect of HFQSME grouting material on the surrounding rock of deep high-stress roadway was evaluated through industrial testing. The prestressed anchor grouting method was used to improve the original support design scheme, and data monitoring and analysis were conducted on site. Compared with the original supporting scheme, the deformation of the 1780 ventilation was significantly reduced. Therefore, HFQSME grouting material had good adaptability for the surrounding rock of deep high-stress roadways. • A new prestressed anchor-grouting reinforcement method was proposed and applied to the Shiyakou Coal Mine. • A new type of grouting material has been developed by adding the admixtures. • The grouting reinforcement process of superfine cement was simulated. • The reinforcement of the surrounding rock with different fracture rates were studied.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Geomechanics and Mining Engineering · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Study on the Pore-throat structure characterization and nano grouting law of the Low-permeability mudstone based on NMR-RSM methods10.1016/j.conbuildmat.2022.127913 ↗
2. Investigation on the evolution and control of surrounding rock fracture under different supporting conditions in deep roadway during excavation period10.1016/j.ijrmms.2019.104122 ↗
3. Effect of fracture heterogeneity on rock mass stability in a highly heterogeneous underground roadway10.1007/s00603-019-01887-5 ↗
4. Model test study on large deformation mechanism of thin-bedded metamorphic sandstone tunnel10.1007/s10064-022-02937-z ↗
5. Mechanism and application of new prestressed yield bolt for controlling deep high-stress rock mass
6. Strength and failure characteristics of an irregular columnar jointed rock mass under polyaxial stress conditions10.1007/s00603-022-03023-2 ↗
7. Development of effective microfine cement-based grouts (EMCG) for porous and fissured strata10.1016/j.conbuildmat.2020.120775 ↗
8. Investigations on shear properties of soft rock joints under grouting10.1007/s00603-021-02366-6 ↗
9. Grouting effect on rock fracture using shear and seepage assessment10.1016/j.conbuildmat.2020.118131 ↗
10. Experimental study on the diffusion characteristics of polyurethane grout in a fracture10.1016/j.conbuildmat.2020.121711 ↗
11. Rheological characteristics of cement grout and its effect on mechanical properties of a rock fracture10.1007/s00603-017-1340-x ↗
12. Failure mechanism of bolting support and high-strength bolt-grouting technology for deep and soft surrounding rock with high stress10.1007/s11771-016-3089-x ↗
13. Behaviour of rock joint reinforced by energy-absorbing rock bolt under cyclic shear loading condition10.1016/j.ijrmms.2018.07.021 ↗
14. Rock strata failure behavior of deep ordovician limestone aquifer and multi-level control technology of water inrush based on microseismic monitoring and numerical methods10.1007/s00603-022-02891-y ↗
15. Numerical analysis of deformation and failure characteristics of deep roadway surrounding rock under static-dynamic coupling stress10.1007/s11771-021-4620-2 ↗
16. A study on the mix proportion of fiber-polymer composite reinforced cement-based grouting material10.1016/j.conbuildmat.2022.127025 ↗
17. Development of cement-based self-stress composite grouting material for reinforcing rock mass and engineering application10.1016/j.conbuildmat.2018.12.143 ↗
18. Effects of sodium sulfate and potassium sulfate on the properties of calcium sulfoaluminate (CSA) cement based grouting materials10.1016/j.conbuildmat.2022.129045 ↗
19. Performance improvement of nanocolloidal silica-aluminate cement composite grouting materials with organic acids
20. Tentative application of expansive cementitious materials in grouting-a systematic review
21. Study on expansion effect and hydration characteristics of ultra-high strength cement-based grouting materials based on humidity compensation
22. Formulation and properties of a newly developed powder geopolymer grouting material10.1016/j.conbuildmat.2020.120304 ↗
23. Experimental study on properties of a new type of grouting material for the reinforcement of fractured seam floor10.1016/j.jmrt.2019.08.049 ↗
24. Reinforcing effects of carbon nanotubes on cement-based grouting materials under dynamic impact loading10.1016/j.conbuildmat.2023.131083 ↗
25. Design optimization of cement grouting material based on adaptive boosting algorithm and simplicial homology global optimization
26. Preparation and characterization of the greener alkali-activated grouting materials based on multi-index optimization10.1016/j.conbuildmat.2020.121328 ↗
27. Effect of organic alkali on compressive strength and hydration of wet-grinded granulated blast-furnace slag containing Portland cement10.1016/j.conbuildmat.2019.02.028 ↗
28. Study on the inorganic synthesis from recycled cement and solid waste gypsum system: application in grouting materials10.1016/j.conbuildmat.2020.118930 ↗
29. Cement flow in interaction rock fractures and its corresponding new construction process in slope engineering10.1016/j.conbuildmat.2021.124533 ↗
30. New peak shear strength model for cement filled rock joints10.1016/j.enggeo.2017.12.021 ↗
31. Reducing environmental impacts and carbon emissions: study of effects of superfine cement particles on blended cement containing high volume mineral admixtures10.1016/j.jclepro.2018.06.079 ↗
32. Study on the failure mechanism between polyurethane grouting material and concrete considering the effect of moisture by digital image correlation
33. Effects of sodium aluminate and quicklime on the properties of CSA grouting materials
34. A new clay-cement composite grouting material for tunnelling in underwater karst area10.1007/s11771-019-4140-5 ↗
35. Mechanism and application of concrete-filled steel tubular support in deep and high stress roadway10.1016/j.conbuildmat.2018.07.118 ↗
36. Mechanism and experiment of self-stress grouting reinforcement for fractured rock mass of underground engineering
37. Preparation, characterization, and rheological analysis of eco-friendly geopolymer grouting cementitious materials based on industrial solid wastes
38. Experimental study on the mechanical properties of cement-based grouting materials after exposed to high temperatures
39. Development and application of novel microfine cement-based grout
40. Autogenous shrinkage and crack resistance of carbon nanotubes reinforced cement-based materials10.1186/s40069-020-00421-0 ↗
41. Impact of modified kenaf fibers on shrinkage and cracking of cement pastes10.1016/j.conbuildmat.2020.120230 ↗
42. Modelling of autogenous shrinkage of hardening cement paste10.1016/j.conbuildmat.2020.120708 ↗
43. Experimental study of improved cement silicate grouting material for broken surrounding rock
44. Research and application of new prestressed anchor-grouting support for special open-off cut in soft-thick coal seam