Sustainable stabilization of waste foundry sands in alkali activated glass-based matrices
Source abstract
Abstract
Since cements and concrete are highly energy-demanding, sustainable construction materials represent a crucial aspect in mitigating environmental pollution. The study proposes a promising solution for transforming waste into new and highly sustainable construction materials according to alkali activation process. The unemployed fractions of boro-alumino-silicate pharmaceutical glass (BASG) and waste foundry sands (WFS) were employed in the production of synthetic conglomerates. Glass powders were firstly suspended into ‘mild’ NaOH/KOH aqueous solutions (2.5–5 M) for 180 minutes at 500 rpm, at room temperature or at 40°C. Conglomerates were later produced by embedding of foundry sands in slurries of alkali activated glass, for BASG:WFS ratios of 1:1, 1:2 or 1:3. The mass of sand embedded is a function of the grain size distribution. A final drying phase, lasting 7 days at 40°C, promoted the consolidation of the newly-formed materials due to the formation of strong siloxane bonds. The obtained conglomerates were mechanically tested under compression. Interestingly, the composites exhibited a compressive strength-to-density ratio comparable with commercial insulating lightweight concrete and Plaster of Paris. Moreover, the leachates from conglomerates were subjected to optical emission spectroscopy in inductively coupled plasma (ICP-OES) to verify the stabilization of hazardous elements. The methodology selected for the stabilization of pollutants is compliant with UNI EN 12457–2:2002. The results show that the release of critical pollutants (Ba, Cr, Cd, Co, Mo, Ni) was maintained below the European limits. The research highlights the possibility to manufacture conglomerates starting from waste raw materials. Furthermore, stabilizing activity towards hazardous elements is achieved by all composite materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Materials Engineering and Processing · Recycling and utilization of industrial and municipal waste in materials production · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Recycling – the importance of understanding the complexity of the issue10.1080/19397038.2015.1069416 ↗
2. Green-efficient masonry bricks produced from scrap plastic waste and foundry sand
3. Carbon footprint management: a review of construction industry
4. A comparative study of life cycle carbon emissions and embodied energy between sun-dried bricks and fired clay bricks10.1016/j.jclepro.2020.122998 ↗
5. Synthesis of recycled bricks containing mixed plastic waste and foundry sand: physico-mechanical investigation
6. Comprehensive review on utilization of waste foundry sand in concrete
7. Dyer · Waste Foundry sand hot Mix Asph.: A Rev. · 2022 · 359
8. Waste foundry sand in concrete, production instead of natural river sand: a review10.3390/ma15072365 ↗
9. Global Foundry Report , (2019), Global Foundry Report. World Foundry Organization, England, UK. 〈https://www.thewfo.com/news/global-foundry-report-2019/〉 (accessed 18.03.2024).
10. Reuse or disposal of waste foundry sand: an insight into environmental aspects10.3390/app12136420 ↗
11. Environmental analysis of waste foundry sand via life cycle assessment10.1007/s11356-016-8085-z ↗
12. Global trends and status in waste foundry sand management research during the years 1971-2020: a systematic analysis10.1007/s11356-021-13251-8 ↗
13. Sustainable sourcing of raw materials for the built environment
14. Waste slags as sustainable construction materials: a compressive review on physico mechanical properties10.1016/j.jmrt.2023.02.176 ↗
15. Mater., Durability assessment and microstructure of high-strength performance bricks produced from pet waste and foundry sand10.3390/ma14195635 ↗
16. Systematic review on the use of waste foundry sand as a partial replacement of natural sand in concrete10.1016/j.conbuildmat.2024.136460 ↗
17. Insight into the perspectives of waste foundry sand as a partial or full replacement of fine aggregate in concrete
18. Effects of foundry sand as a fine aggregate in concrete production10.1016/j.conbuildmat.2014.07.070 ↗
19. In-plant production of bricks containing waste foundry sand—A study with Belgaum foundry industry
20. Recycling of waste glass and incinerated sewage sludge ash in glass-ceramics10.1016/j.wasman.2023.12.007 ↗
21. Blended limestone-Portland cement binders enhanced by waste glass based and commercial sodium silicate - Effect on properties and CO2 emissions10.1016/j.cemconcomp.2021.104364 ↗
22. Glass fines: a review of cleaning and up-cycling possibilities10.1016/j.jclepro.2020.121875 ↗
23. Recycling of waste cathode ray tube glass through fly ash-slag geopolymer mortar10.1016/j.conbuildmat.2022.126454 ↗
24. Life cycle assessment of pharmaceutical packaging addressing end-of-life alternatives10.1016/j.wasman.2023.12.022 ↗
25. COVID-19 pandemics Stage II – Energy and environmental impacts of vaccination10.1016/j.rser.2021.111400 ↗
26. A new technology of transforming recycled glass waste to construction components10.1016/j.conbuildmat.2021.125539 ↗
27. Comparison of ground waste glass with other supplementary cementitious material10.1016/j.cemconcomp.2013.09.005 ↗
28. Influence of waste glass powder as a supplementary cementitious material (SCM) on physical and mechanical properties of cement paste under high temperatures10.1016/j.jclepro.2022.130778 ↗
29. Squaring the circular economy10.1016/B978-0-12-396459-5.00030-1 ↗
30. Conversion of industrial wastes into marginal construction materials10.18820/24150487/as25i2.5 ↗
31. Utilization of plastic waste material in masonry bricks production towards strength, durability and environmental sustainability
32. Strength and durability performance of masonry bricks produced with crushed glass and melted PET plastics
33. Effects of particle size on dynamic constitutive relation and energy absorption of calcareous sand10.1016/j.powtec.2019.07.088 ↗
34. Strength, microstructure, efflorescence behavior and environmental impacts of waste glass geopolymers cured at ambient temperature10.1016/j.jclepro.2019.119610 ↗
35. Alkali-activated materials in environmental technology: introduction
36. Geopolymers: An option for the valorization of incinerator bottom ash derived “end of waste”10.1016/j.ceramint.2014.10.008 ↗
37. Upcycling of pharmaceutical glass into highly porous ceramics: from foams to membranes.10.3390/ma15113784 ↗
38. Novel glass-based membranes for Cu adsorption: from alkali activation to sintering10.1016/j.heliyon.2023.e18221 ↗
39. Novel cesium immobilization by alkali activation and cold consolidation of waste pharmaceutical glass10.1016/j.jclepro.2024.142673 ↗
40. Potentially of the use of pyoclastic volcanic residues in the production of alkali activated material10.1007/s12649-020-01004-6 ↗
41. Chapter 1, Butterworth-Heinemann
42. Conservation and Recycling, An overview on the reuse of waste glasses in alkali-activated materials
43. Novel ‘Inorganic Gel Casting’ process for the manufacturing of glass foams10.1016/j.jeurceramsoc.2017.01.012 ↗
44. Extension of the ‘Inorganic Gel Casting’ process to the manufacturing of boro-alumino-silicate glass foams10.3390/ma11122545 ↗
45. Thermal shock behavior and infrared radiation property of integrative insulations consisting of MoSi2/borosilicate glass coating and fibrous ZrO2 ceramic substrate10.1016/j.surfcoat.2015.03.008 ↗
46. Sodium silicate solutions from dissolution of glass wastes. Statistical analysis
47. New selective dissolution process to quantify reaction extent and product stability in metakaolin-based geopolymers10.1016/j.compositesb.2019.107172 ↗
48. Initial dissolution rate of the international simple glass as a function of the pH and temperature measured using microchannel flow-through test method10.1111/ijag.12043 ↗
49. Corrosion behavior mechanism of borosilicate glasses towards different leaching solutions evaluated by the grain method and FTIR spectral analysis before and after gamma irradiation10.1007/s12633-017-9586-1 ↗
50. Waste foundry sand usage for building material production: a first geopolymer record in material reuse
51. Strength, durability, and micro-structural properties of concrete made with used-foundry sand (UFS)10.1016/j.conbuildmat.2010.11.065 ↗
52. Khatib, J.M.; Baig, S.; Bougara, A.; Booth, C., 2nd International Conference on Sustainable Construction Materials and Technologies, 2010, 931-935.
53. Use of foundry sands in the production of ceramic and geopolymers for sustainable construction materials10.3390/app13085166 ↗
54. Mechanical and environmental behavior of waste foundry sand stabilized with alkali-activated sugar cane bagasse ash-eggshell lime binder
55. The potential of industrial waste: using foundry sand with fly ash and electric arc furnace slag for geopolymer brick production10.1016/j.heliyon.2020.e03697 ↗
56. Making concrete ‘greener’ with fly ash
57. CLD-to-PSD model to predict bimodal distributions and changes in modality and change in modality and particle morphology.
58. Foundry wastes reuse and recycling in concrete production10.3844/ajessp.2007.135.142 ↗
59. A simple method for physical purification of bentonite10.1016/j.clay.2015.10.031 ↗
60. Effect of montmorillonite layer charge on the thermal stability of bentonite10.1007/s42860-021-00117-w ↗
61. Use of quartz and quartz-feldspar sands in molding mixes for casting iron10.1007/s11148-014-9629-8 ↗
62. Influence of the addition of amorphous and crystalline silica on the structural properties of metakaolin-based geopolymers10.1016/j.clay.2021.106312 ↗
63. Synthesis and characterization of sodium silicate from spent foundry sand: effective route for waste utilisation
64. Formation and stability of gismondine-type zeolite in cementitious systems10.1111/jace.17572 ↗
65. El-Eswed, B.I , Alkali-Activated Materials in Environmental Technology Applications. Solidification/stabilization of hazardous wastes by alkali activation, 2022, Woodhead Publishing, Kidlington (UK), pp. 279-305, https://doi.org/10.1016/B978-0-323-88438-9.00011-9.10.1016/B978-0-323-88438-9.00006-5 ↗
66. Porous glass-ceramics from alkali activation and sinter-crystallization of mixtures of waste glass and residues from plasma processing of municipal solid waste10.1016/j.jclepro.2018.03.167 ↗
67. Standard UNI EN 12457-2:2002. Characterisation of Waste—Leaching—Compliance Test for Leaching of Granular Waste Materials and Sludges—Part 2: One Stage Batch Test at a Liquid to Solid Ratio of 10 L/kg for Materials with Particle Size Below 4 mm (Without or With Size Reduction). Available online: https://standards.iteh.ai/catalog/standards/cen/db6fbdf3-1de7-457c-a506-46c4898e3f09/en-12457-2-2002 (accessed on 18.03.2024).
68. Reuse or disposal of waste foundry sand: an insight into environmental aspects10.3390/app12136420 ↗
69. European Court of Auditors , EU actions to address the increasing amount of hazardous waste, Publications Office of the European Union, 2023, 〈https://data.europa.eu/doi/10.2865/519218〉.