Experimental investigation on influence of embedment length, bar diameter and concrete cover on bond between reinforced bars and steel fiber reinforced concrete (SFRC)
Source abstract
Abstract
The bond between reinforced bars and concrete has a significant impact on reinforced concrete structures. Incorporating steel fibers in concrete not only enhances the performance of the concrete but also influences the bond strength of embedded reinforcing bars. In this paper, experiments have been carried out to investigate the influences of different bar diameters, concrete cover and embedment lengths on bond-slip responses between reinforcing bars and steel fiber reinforced concrete (SFRC). Furthermore, pull-out tests with normal concrete were also executed as a comparative group. The bond-slip results of specimens were collected. The impact of embedment length, reinforcing bar diameter, and the existence of steel fibers on the bond behavior of reinforcing bars was comprehensively analyzed. Meanwhile, the results indicate that variations in the ratio of concrete cover to reinforcing bar diameter lead to different effects on the bond behavior of SFRC compared with normal concrete. Different failure modes of specimens were exhibited and discussed. Additionally, a mathematical model for bond strength of bars in SFRC was proposed based on the correction of the bond strength model with normal concrete, which shows good agreement with experimental results.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Tension stiffening in reinforced high performance fiber reinforced cement-based composites10.1016/j.cemconcomp.2014.03.004 ↗
2. Fiber reinforced concrete properties
3. Concrete reinforced with deformed steel fibers. Part II: toughness characterization
4. Naaman · 2008 · 91
5. On the effectiveness of steel fibers as shear reinforcement
6. Shear slip post-cracking behaviour of polyolefin and steel fibre reinforced concrete10.1016/j.conbuildmat.2021.123187 ↗
7. Modelling and experimental validation of flexural tensile properties of steel fiber reinforced concrete10.1016/j.conbuildmat.2020.121974 ↗
8. Mixed mode fracture behaviour of steel fibre reinforced concrete10.1617/s11527-013-0045-1 ↗
9. Shear tests of fiber concrete beams without stirrups
10. Inverse analysis-based model for the tensile behaviour of fibre-reinforced concrete with manufactured and waste tyres recovered fibres
11. An experimental study on the post-cracking behaviour of Hybrid Industrial/Recycled Steel Fibre-Reinforced Concrete10.1016/j.conbuildmat.2015.07.007 ↗
12. Experimental and numerical characterization of the bond behavior of steel fibers recovered from waste tires embedded in cementitious matrices10.1016/j.cemconcomp.2015.04.015 ↗
13. Direct tensile behaviors of steel-bar reinforced ultra-high performance fiber reinforced concrete: effects of steel fibers and steel rebars10.1016/j.conbuildmat.2020.118054 ↗
14. Assessing the influence of fibers on the flexural behavior of reinforced concrete beams with different longitudinal reinforcement ratios10.1002/suco.201900575 ↗
15. Deterioration of bond–slip due to corrosion of steel reinforcement in reinforced concrete10.1680/jmacr.15.00217 ↗
16. State-of-the-art review on the bond properties of corroded reinforcing steel bar10.1016/j.conbuildmat.2019.04.077 ↗
17. Analytical model for the bond stress-slip relationship of deformed bars in normal strength concrete10.1016/j.conbuildmat.2018.11.258 ↗
18. Stirrup effects on the bond properties of corroded reinforced concrete10.1680/jmacr.19.00531 ↗
19. Bond behavior of reinforcing bars in tensile strain-hardening fiber-reinforced cement composites
20. Effect of corrosion on bond behavior and bending strength of reinforced concrete beams10.1631/BF02839464 ↗
21. Short-term load–deflection behavior of corroded RC beams with confinement effect based on the partial-interaction segmental approach10.1016/j.engstruct.2020.111014 ↗
22. Failure mechanism analysis and partial-interaction numerical simulation of Grouted Sleeve Connections (GSC) in tensile behavior
23. Structural performance of a 26-year-old corroded reinforced concrete beam10.1080/19648189.2012.667992 ↗
24. Factors affecting anchorage bond strength in high-performance concrete
25. Steel–concrete bond in lightweight fiber reinforced concrete under monotonic and cyclic actions10.1016/j.engstruct.2005.01.010 ↗
26. The effect of fibers on the variation of bond between steel reinforcement and concrete with casting position10.1016/j.conbuildmat.2010.11.093 ↗
27. Laboratory study of metakaolin and microsilica effect on the performance of high-strength concrete containing Forta fibers10.1186/s43251-023-00091-4 ↗
28. The effect of steel fiber on the bond between concrete and deformed steel bar in SFRCs10.1016/j.conbuildmat.2012.09.098 ↗
29. Bond performance of reinforcing bars in SFRC: Experiments and meso-mechanical ll10.1016/j.compstruct.2023.117092 ↗
30. Bond stress distribution analysis between steel bar and steel fiber reinforced concrete using midpoint stress interpolation method10.1016/j.conbuildmat.2020.119866 ↗
31. Lin A., Ostertag C.P. Multi-scale pull-out resistance of steel reinforcing bar embedded in hybrid fiber reinforced concrete (HyFRC)[C]//IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2017, 246(1): 012022.10.1088/1757-899X/246/1/012022 ↗
32. Steel–concrete bond in lightweight fiber reinforced concrete under monotonic and cyclic actions10.1016/j.engstruct.2005.01.010 ↗
33. Bond between normal strength and high-strength concrete (HSC) and reinforcing bars in splices in beams
34. Factors affecting anchorage bond strength in high-performance concrete
35. Effect of the bar diameter on the bond strength of passive reinforcement in high-performance concrete[J]
36. Effect of the concrete cover thickness ratio on the post-yield stiffness of bridge columns with partially unbonded unstressed steel strands10.1186/s43251-022-00060-3 ↗
37. Bond behavior of geopolymer concrete with steel and GFRP bars10.1016/j.compstruct.2022.116150 ↗
38. Bond behavior of geopolymer concrete with steel and GFRP bars10.1016/j.compstruct.2022.116150 ↗
39. Bond-slip behavior between pre-corroded rebar and steel fiber reinforced concrete10.1016/j.conbuildmat.2018.06.116 ↗
40. Experimental investigation of stirrup confinement effects on bond-slip responses for corner and middle bars10.1016/j.conbuildmat.2021.125629 ↗
41. Bond behaviour of reinforcing bars in UHPFRC: experimental investigation10.1617/s11527-015-0628-0 ↗
42. Bond-slip model for rebar mounted to high-strength grouting material
43. Degradation of steel-to-concrete bond due to corrosion10.1016/j.conbuildmat.2017.09.142 ↗
44. Unified bond stress–slip model for reinforced concrete10.1061/(ASCE)ST.1943-541X.0000747 ↗
45. Three-dimensional elasticity solutions for bending of generally supported thick functionally graded plates10.1007/s10483-014-1871-7 ↗
46. Crack propagation and fracture process zone (FPZ) of wood in the longitudinal direction determined using digital image correlation (DIC) technique10.3390/rs11131562 ↗