journal article·2024-12Open access

Alkaline-washed phosphogypsum-based cemented paste backfill prepared using steel slag and blast furnace slag: Mechanical properties, fluoride immobilization, and hydration mechanism

Qiusong Chen, Lingzhi Gao, Aixiang Wu, Yan Feng, Yunbo Tao, Daolin Wang

Abstract

Phosphogypsum (PG)-based cemented paste backfill (PCPB) is an effective way to deal with the problem of PG storage, but the low strength, high cost, and serious fluoride pollution of PCPB limit the popularization of this technology. Alkaline washing has been proven to be an effective means to decrease fluoride from PG. Steel slag (SS) and ground granulated blast furnace slag (GGBFS) are common materials possessing pozzolanic activity. SS and GGBFS can be employed as cement substitutes under alkaline conditions. This paper proposes the combined heuristic effect of NaOH pretreatment, SS, and GGBFS to improve the strength of alkaline-washed PCPB (APCPB) and the ability of fluoride immobilization. The study results show that alkali washing stimulates the secondary hydration activity of solid waste materials and promotes the formation of hydration products such as AFt and C-S-H so that the UCS value of APCPB increases greatly in the later stages of hydration increases by 309.8 % (7.06 MPa), and the leaching concentration of fluoride decreases by 21.5 % (0.85 mg/L). Through microscopic characterization experiments on the APCPB, it was discovered that in the alkaline hydration system, the transformation of C-S-H and AFt into C-A-S-H, F-C-S-H, and F-AFm, coupled with the physical encapsulation of hydration products, are the main factors immobilizing fluoride. This work provides a much-needed supplement to the in-situ cement-free repair technology of PG in mines to develop more lower-carbon and environmentally friendly mixture formulations. • The cement-free mixture formulations is provided for phosphogypsum in-situ repair technology. • The strength was greatly improved and fluoride leaching was reduced by using SS to GGBFS with a mass ratio of 1: 2. • Alkali washing stimulated the pozzolanic activity of SS and GGBFS and promoted the formation of hydration products. • The immobilization mechanism of fluoride by C-S-H and AFt in alkaline hydration environment was clarified.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tailings Management and Properties · Rock Mechanics and Modeling · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. A new basic burning raw material for simultaneous stabilization/solidification of PO43−-P and F− in phosphogypsum10.1016/j.ecoenv.2023.114582 ↗
2. Phosphogypsum recycling: a review of environmental issues, current trends, and prospects10.3390/app11041575 ↗
3. The generation process, impurity removal and high-value utilization of phosphogypsum material10.3390/nano12173021 ↗
4. Phosphogypsum recycling in the building materials industry: assessment of the radon exhalation rate10.1016/j.jenvrad.2017.04.002 ↗
5. Application of phosphogypsum in soilization: a review10.1007/s13762-023-04783-2 ↗
6. Characterization of macro mechanical properties and microstructures of cement-based composites prepared from fly ash, gypsum and steel slag10.3390/min12010006 ↗
7. Treated phosphogypsum as an alternative set regulator and mineral addition in cement production10.1016/j.jclepro.2019.118752 ↗
8. The sponge effect of phosphogypsum-based cemented paste backfill in the atmospheric carbon capture: Roles of fluorides, phosphates, and alkalinity10.1016/j.seppur.2023.123702 ↗
9. Fluorides immobilization through calcium aluminate cement-based backfill: accessing the detailed leaching characterization under torrential rainfall10.1016/j.envres.2023.117229 ↗
10. Transfer characteristic of fluorine from atmospheric dry deposition, fertilizers, pesticides, and phosphogypsum into soil10.1016/j.chemosphere.2021.130432 ↗
11. Effect of phosphorus on the properties of phosphogypsum-based cemented backfill10.1016/j.jhazmat.2020.122993 ↗
12. Utilization path of bulk industrial solid waste: A review on the multi-directional resource utilization path of phosphogypsum10.1016/j.jenvman.2022.114957 ↗
13. In situ remediation of phosphogypsum with water-washing pre-treatment using cemented paste backfill: rheology behavior and damage evolution10.3390/ma14226993 ↗
14. Effect of phosphatic and fluoride impurities of phosphogypsum on the properties of selenite plaster10.1016/S0008-8846(03)00068-1 ↗
15. In-situ remediation of phosphogypsum in a cement-free pathway: Utilization of ground granulated blast furnace slag and NaOH pretreatment10.1016/j.chemosphere.2022.137412 ↗
16. Provenance and geochemical behavior of fluorine in the soils of an endemic fluorosis belt, central Iran10.1016/j.jafrearsci.2016.12.016 ↗
17. Monitoring the hydration behavior of hardened cement paste affected by different environmental pH regimes10.3389/fmats.2022.980887 ↗
18. Strength and microstructure evolution in cemented mine backfill with low and high pH pyritic tailings: Effect of mineral admixtures10.1016/j.conbuildmat.2022.127109 ↗
19. Slag-based stabilization/solidification of hazardous arsenic-bearing tailings as cemented paste backfill: Strength and arsenic immobilization assessment
20. Preparation of controlled low-strength materials from alkali-excited red mud-slag-iron tailings sand and a study of the reaction mechanism10.1007/s11356-022-23607-3 ↗
21. Guidance and review: advancing mining technology for enhanced production and supply of strategic minerals in China10.1016/j.gsme.2024.03.005 ↗
22. Alkali-activated, cementless, controlled low-strength materials (CLSM) utilizing industrial by-products10.1016/j.conbuildmat.2013.09.002 ↗
23. S. Song, D. Sohn, H.M. Jennings, T.O. Mason, Hydration of alkali-activated ground granulated blast furnace slag, (n.d.).
24. Microscale and macroscale strength behaviors of blast furnace slag- cement based materials: modeling and analysis10.1016/j.conbuildmat.2023.131016 ↗
25. Effect of temperature-rising inhibitor on the hydration and performance of cemented paste-filling material
26. Ultrasonic evaluation of strength properties of cemented paste backfill: effects of mineral admixture and curing temperature10.1016/j.ultras.2019.105983 ↗
27. Mechanical grinding activation of modified magnesium slag and its use as backfilling cementitious material
28. Dual waste utilization in cemented paste backfill using steel slag and mine tailings and the heavy metals immobilization effects10.1016/j.powtec.2022.117413 ↗
29. Effects of mineral additives and age on microstructure evolution and durability properties of sand-reinforced cementitious mine backfills
30. Experimental study on backfilling mine goafs with chemical waste phosphogypsum
31. Study on mechanical and thermal properties of alkali-excited fly ash aerogel foam concrete10.1016/j.conbuildmat.2023.133770 ↗
32. The Influence Mechanism of ettringite crystals and microstructure characteristics on the strength of calcium-based stabilized soil10.3390/ma14061359 ↗
33. Role of siliceous raw materials on the structure of nano-csh and their effect on the properties of cement10.1061/JMCEE7.MTENG-16057 ↗
34. Influence of fluoride ion on the performance of PCE in hemihydrate gypsum pastes
35. Effect of gypsum addition on the mechanical and microstructural performance of sulphide-rich cemented paste backfill10.3390/min11030283 ↗
36. Effect of phosphogypsum on physiochemical and mechanical behaviour of cement stabilized dredged soil from Fuzhou, China10.1016/j.gete.2020.100195 ↗
37. Preparation of paste backfill material from mix-calcined sludge ash10.1007/s12649-020-01076-4 ↗
38. Crystalline admixture effects on crystal formation phenomena during cement pastes’ hydration10.1007/s10973-019-08745-0 ↗
39. Research progress on endogenous chloride ion binding of concrete
40. Hydration products C-A-S-H and N-A-S-H of alkali-activated materials