Management and valorisation of delithiated β-spodumene and its processing stream
Source abstract
Abstract
In many regions including Australia and South America (Lithium Triangle), lithium mining needs to thrive without compromising natural ecosystems. In particular, extracting lithium from pegmatites produces significant amounts of Delithiated β-spodumene (DβS) or equivalent materials. In this paper, an approach is proposed to solidify and stabilise both the solid and liquid streams of lithium processing, which is safer than the disposal of slurries in tailings dams. Alternatively, the obtained solid phase can be used for construction or geotechnical amelioration. The characterisation of DβS revealed that it belongs to the “silt loam” textural class with irregularly shaped and sharply edged particles. It has low basicity and hydration activity, which means that ground-granulated blast-furnace slag (GGBS) is required to make adequate solid products at ambient condition. In addition, it loses more mass than GGBS and fly ash (FA) as temperature increases, likely due to the decomposition of leached pyroxene and gypsum, dehydroxylation of hydrated aluminosilicates and quartz, and marginal losses of carbon dioxide. It was found that as opposed to common precursors of geopolymer or alkali activated materials, DβS increases workability and setting time.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Nuclear materials and radiation effects · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Electricity demand and carbon emission in power generation under high penetration of electric vehicles. A European Union Perspective10.1016/j.egyr.2020.09.025 ↗
2. A review on methods for liberating lithium from pegmatities10.1016/j.mineng.2019.106085 ↗
3. Sustainable geopolymer using lithium concentrate residues10.1016/j.conbuildmat.2019.116740 ↗
4. Sustainable and greener self-compacting concrete incorporating industrial by-products: a review
5. Correlation studies on geotechnical properties of various industrial byproducts generated from thermal power plants, iron and steel industries as liners in a landfill – a detailed review10.1016/j.jclepro.2020.121207 ↗
6. Use of clays by-products from phosphate mines for the manufacture of sustainable lightweight aggregates10.1016/j.jclepro.2020.124361 ↗
7. J. Davidovits, Polymère mineral, French Patent application (7922041/8018970).
8. Davidovits · 2008
9. Is geopolymer concrete a suitable alternative to traditional concrete?
10. AS/NZS 3582.1 · 2016
11. ASTM C618-15 · 2015
12. Developments in geopolymer precast concrete
13. Synthesis of high strength ambient cured geopolymer composite by using low calcium fly ash10.1016/j.conbuildmat.2016.08.097 ↗
14. AS/NZS 3582.2 · 2016
15. Wallah · 2006
16. Geopolymer concrete with fly ash
17. Assessing behaviour of fresh and hardened geopolymer concrete mixed with class-F fly ash10.1007/s12205-014-1254-z ↗
18. The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation10.1016/j.cemconres.2004.10.042 ↗
19. Reaction mechanisms of alkali-activated materials10.1590/s1983-41952021000300009 ↗
20. Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers10.1016/j.conbuildmat.2013.09.048 ↗
21. Rheological and the fresh state properties of alkali-activated mortars by blast furnace slag10.3390/ma14082069 ↗
22. AS/NZS 3582.3 · 2016
23. Improved reactivity of fly ash-slag geopolymer by the addition of silica fume
24. Development of high strength one-part geopolymer mortar using sodium metasilicate10.1016/j.conbuildmat.2019.117611 ↗
25. Alkali-activated fly ashes: a cement for the future10.1016/S0008-8846(98)00243-9 ↗
26. Performance of geopolymer tiles in high temperature and saturation conditions10.1016/j.conbuildmat.2021.122994 ↗
27. Effects of red mud and alkali-activated slag cement on efflorescence in cement mortar10.1016/j.conbuildmat.2016.12.123 ↗
28. Properties and microstructure of the hardened alkali-activated red mud-slag cementitious material10.1016/S0008-8846(03)00093-0 ↗
29. Mix-design parameters and real-life considerations in the pursuit of lower environmental impact inorganic polymers10.1007/s12649-017-9877-1 ↗
30. Comparison of alkali and silica sources in one-part alkali-activated blast furnace slag mortar10.1016/j.jclepro.2018.03.202 ↗
31. Synthesis of heat and ambient cured one-part geopolymer mixes with different grades of sodium silicate10.1016/j.ceramint.2014.12.154 ↗
32. Co-disposal of MSWI fly ash and bayer red mud using an one-part geopolymeric system10.1016/j.jhazmat.2016.06.042 ↗
33. P. Borges, F. Santos, N. Milikic, F. Belieny, C. Barsante, Lithium aluminosilicate residue as raw material in the production of sustainable concrete masonry units, Open Construct. Build. Technol. J. 10, 418–430.10.2174/1874836801610010418 ↗
34. Development of new high performance supplementary cementitious material – a lithium production by-product
35. Humphreys · 2002
36. Equivalent stress block for normal-strength concrete incorporating strain gradient effect10.1680/macr.2012.64.1.1 ↗
37. Carbon dioxide equivalent (CO2-e) emissions: a comparison between geopolymer and OPC cement concrete10.1016/j.conbuildmat.2013.01.023 ↗
38. Material and glass-fibre-reinforced polymer bond properties of geopolymer concrete
39. Development of a high strength geopolymer by novel solar curing10.1016/j.ceramint.2017.05.173 ↗
40. Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated carbonation10.1016/j.cemconres.2013.06.007 ↗
41. Examination of chloride-induced corrosion in reinforced geopolymer concretes10.1061/(ASCE)MT.1943-5533.0000672 ↗
42. Durability evaluation of geopolymer and conventional concretes10.1016/j.conbuildmat.2017.01.056 ↗
43. Corrosion resistance of alkali-activated slag cement10.1680/adcr.2003.15.2.77 ↗
44. Fly ash-based geopolymers: effect of slag addition on efflorescence10.1007/s11595-016-1430-8 ↗
45. Response of alkali activated low calcium fly-ash based geopolymer concrete under compressive load at elevated temperatures10.1617/s11527-016-0877-6 ↗
46. Residual stress-strain relationship for concrete after exposure to high temperatures10.1016/j.cemconres.2006.05.029 ↗
47. Effect of superplasticizer and shrinkage-reducing admixtures on alkali-activated slag pastes and mortars10.1016/j.cemconres.2004.10.014 ↗
48. Experimental investigation of rectangular air-cured geopolymer concrete columns reinforced with GFRP bars and stirrups10.1061/(ASCE)CC.1943-5614.0000938 ↗
49. Reaction kinetics, gel character and strength of ambient temperature cured alkali activated slag-fly ash blends10.1016/j.conbuildmat.2015.01.065 ↗
50. A study on the setting characteristics of sodium silicate-activated slag pastes10.1016/S0008-8846(02)01096-7 ↗
51. McGannon · 1971
52. Bakharev · 2000
53. Hydrogen substitution in lithium-aluminosilicates10.1007/BF01115722 ↗
54. Thermo-poro-mechanics modelling of gypsum dehydration
55. Characterization and removal of iron from pyrophyllite ore for industrial applications
56. Salvadori · 1988
57. Swift · 1976
58. Geopolymer concrete durability subjected to aggressive environments – a review of influence factors and comparison with ordinary portland cement10.1016/j.conbuildmat.2021.122496 ↗
59. Studies of natural and accelerated carbonation in metakaolin-based geopolymer10.4028/www.scientific.net/AST.92.38 ↗
60. Penttala · 2009 · 3
61. An investigation of the microstructure and durability of a fluidized bed fly ash-metakaolin geopolymer after heat and acid exposure10.1016/j.matdes.2015.03.009 ↗