Effect of modified phosphogypsum on the dimensional stability of supersulfated cement-based materials
Source abstract
Abstract
Compared to ordinary Portland cement (OPC), supersulfated cement (SSC) is an environmentally friendly cement. Phosphogypsum (PG) is commonly utilized as a sulfate activator in SSC. In this study, the effect of modified PG on the dimensional stability of supersulfated cement-based materials (SSCM) was investigated. Taking the point of decrease in internal relative humidity as the time-zero of autogenous shrinkage , the lime neutralized PG (NPG) reduced the autogenous shrinkage of SSCM by 15.03 % at 28 days and 16.26 % at 90 days, suppressing the development of autogenous shrinkage in SSCM. However, the calcined PG (CPG) displayed the opposite trend. Both modified PG improved the drying shrinkage of SSCM, and the NPG resulted in less water loss. Compared to OPC, SSCM exhibited a rapid increase in autogenous shrinkage relative to drying shrinkage, which was intensified with CPG. Obviously, the NPG demonstrated superior modification effects on the dimensional stability of SSCM compared to CPG.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Review of availability of source materials for geopolymer/sustainable concrete10.1016/j.jclepro.2020.121477 ↗
2. The influence of two types of alkali activators on the microstructure and performance of supersulfated cement concrete: mitigating the strength and carbonation resistance10.1016/j.cemconcomp.2021.103947 ↗
3. Deterioration mechanism of supersulfated cement paste exposed to sulfate attack and combined acid-sulfate attack10.1016/j.conbuildmat.2024.134978 ↗
4. Research status of super sulfate cement10.1016/j.jclepro.2021.126228 ↗
5. Quantification of hydration phases in supersulfated cements: review and new approaches10.1680/adcr.2011.23.6.265 ↗
6. Preparation and characterization of an alkali-activated cementitious material with blast-furnace slag, soda sludge, and industrial gypsum10.1016/j.conbuildmat.2022.127735 ↗
7. Influence of the calcination temperature of phosphogypsum on the performance of supersulfated cements10.1016/j.conbuildmat.2020.119961 ↗
8. Effect of neutralization on the setting and hardening characters of hemihydrate phosphogypsum plaster10.1016/j.conbuildmat.2018.09.095 ↗
9. Improving the volume stability of the β-hemihydrate phosphogypsum - cement system by incorporating GGBS10.1016/j.conbuildmat.2023.133807 ↗
10. An experimental study of autogenous and drying shrinkage, fib symposium on high tech concrete - where technology and engineering meet, Maastricht
11. Identification of indexes that could reflect early drying shrinkage of high strength concrete with minerals10.1016/j.conbuildmat.2024.135594 ↗
12. Influence of evaporation rate on pore size distribution, water loss, and early-age drying shrinkage of cement paste after the initial setting10.1016/j.conbuildmat.2019.07.143 ↗
13. Autogenous shrinkage of alkali-activated slag: a critical review10.1016/j.cemconres.2023.107244 ↗
14. A review on chemical and autogenous shrinkage of cementitious systems10.3390/ma17020283 ↗
15. Measuring techniques for autogenous strain of cement paste10.1617/s11527-006-9180-2 ↗
16. Autogenous shrinkage of high performance concrete: a review10.1016/j.conbuildmat.2017.05.064 ↗
17. Blast furnace slag supersulfated cements: composition optimization, microstructures, and environmental impact
18. Efficient utilization of waste CRT glass in low carbon super-sulfated cement mortar10.1016/j.cemconcomp.2023.105037 ↗
19. Hydration behavior and strength development of supersulfated cement prepared by calcined phosphogypsum and slaked lime
20. Effect of modified phosphogypsum on the hydration properties of the phosphogypsum-based supersulfated cement10.1016/j.conbuildmat.2019.04.052 ↗
21. Comparing study on hydration properties of various cementitious systems10.1007/s10973-014-4052-4 ↗
22. Hydration mechanisms of supersulfated cement10.1007/s10973-018-7243-6 ↗
23. Supersulfated cement from blastfurnace slag and chemical gypsum available in the netherlands and neighboring countries10.1016/0008-8846(81)90104-6 ↗
24. Effect of modified phosphogypsum on hydration characteristics of supersulfated cement
25. The mechanical-properties of supersulphated cement containing phosphogypsum10.1016/0008-8846(93)90141-U ↗
26. Investigation on strength and pore structure of supersulfated cement paste
27. Effect of modified phosphogypsum on the mechanical properties of super sulphate cement10.4028/www.scientific.net/AMM.161.264 ↗
28. Mechanism of calcination modification of phosphogypsum and its effect on the hydration properties of phosphogypsum-based supersulfated cement10.1016/j.conbuildmat.2020.118226 ↗
29. Pessimum effect of externally applied chlorides on expansion due to delayed ettringite formation: proposed mechanism10.1016/j.cemconres.2005.11.020 ↗
30. P.T. Durdziński, Hydration of multi-component cements containing cement clinker, slag, calcareous fly ash and limestone, 2016.
31. Solidification/stabilization of lead-contaminated soils by phosphogypsum slag-based cementitious materials10.1016/j.scitotenv.2022.159552 ↗
32. A review on pore structure and properties of autoclaved aerated concrete
33. Mehta · Concr. Microstruct. Prop. Mater. Concr. Microstruct. Prop. Mater. · 2013
34. Effect of fly ash on the pore structure of cement paste under a curing period of 3 years10.1016/j.conbuildmat.2017.03.182 ↗
35. Self-curing concrete: Water retention, hydration and moisture transport10.1016/j.conbuildmat.2006.02.007 ↗
36. Experimental study on the relationship between shrinkage and interior humidity of concrete at early age10.1680/macr.2010.62.3.191 ↗
37. Influence of fineness on hydration kinetics of supersulfated cement10.1016/j.tca.2015.02.013 ↗
38. Internal relative humidity distribution in high-performance cement paste due to moisture diffusion and self-desiccation10.1016/j.cemconres.2005.07.006 ↗
39. Interior relative humidity of normal- and high-strength concrete at early age10.1061/(ASCE)MT.1943-5533.0000441 ↗
40. Comparison of non-contact autogenous shrinkage measurements and the stress ratio of capillary stress to compressive strength10.1016/j.conbuildmat.2019.02.003 ↗
41. Corrugated tube protocol for autogenous shrinkage measurements: review and statistical assessment10.1617/s11527-016-0933-2 ↗
42. Effects of RHA on autogenous shrinkage of Portland cement pastes10.1016/j.cemconcomp.2008.06.014 ↗
43. Improvement of autogenous shrinkage measurement for cement paste at very early age: corrugated tube method using non-contact sensors10.1016/j.conbuildmat.2013.12.086 ↗
44. Autogenous shrinkage and tensile creep of supersulfated cement concrete at early age10.1016/j.conbuildmat.2023.134236 ↗
45. Examining the "time-zero" of autogenous shrinkage in high/ultra-high performance cement pastes10.1016/j.cemconres.2017.03.010 ↗
46. Incorporating elastic and creep deformations in modelling the three-dimensional autogenous shrinkage of cement paste10.1016/j.cemconres.2022.106907 ↗
47. lv · Autogen Shrinkage Low. Water-Bind. Ratio Cem. Pastes Suppl. Cem. Mater. · 2016
48. Accurate determination of the "time-zero" of autogenous shrinkage in alkali-activated fly ash/slag system10.1016/j.compositesb.2019.107367 ↗
49. Effect of autogenous deformation on the cracking risk of slag cement concretes10.1016/j.cemconcomp.2010.12.003 ↗
50. C4A3SBAR Hydration, ettringite formation, and its expansion mechanism.2. microstructural observation of expansion10.1016/0008-8846(82)90104-1 ↗
51. Desiccation shrinkage of cementitious materials as an aging, poroviscoelastic response10.1016/j.cemconres.2010.09.008 ↗
52. Volume deformation and hydration behavior of ordinary portland cement/calcium sulfoaluminate cement blends10.3390/ma16072652 ↗
53. Effect of internal curing on shrinkage and cracking potential under autogenous and drying conditions10.1016/j.conbuildmat.2023.134078 ↗