journal article·2024-07Open access

Experimental investigation on the influence of microwave technology on the treatability and mechanical properties of Portuguese southern blue gum wood

Fernando J.R. Mascarenhas, Alfredo M.P.G. Dias, André L. Christoforo, Rogério M.S. Simões, André M.A. Dias

Abstract

Despite presenting global relevance and satisfactory mechanical properties for structural applications, the Portuguese eucalyptus, southern blue gum (Eucalyptus globulus Labill.), faces difficulties with impregnation with preservative products due to its limited permeability (treatability), which limits its utilization. Microwave (MW) treatment of wood offers a promising avenue for overcoming this issue, but it may impact the mechanical properties. It was identified that there remain research gaps regarding the impacts of MW treatment on eucalyptus. Hence, it was aimed to identify the optimum MW parameters for southern blue gum wood to enhance its impregnability without compromising the mechanical properties. This will contribute to meeting the growing demand for wood for construction. Small clear wood specimens containing heartwood were separated into three groups: two underwent MW treatment, and one did not (control). The samples were impregnated with a preservative product and after submitted to mechanical testing. The MW treatment significantly enhanced the retention of the preservative product, which is remarkable given the impossibility of impregnating eucalyptus heartwood using conventional pressure methods. Although there were slight decreases in the mechanical properties of the MW-treated specimens, they were statistically equivalent to the control group. New insights into the mechanical bending behavior of MW-treated samples also arose. The mechanical properties of MW-treated eucalyptus samples surpassed those of other globally used wood species. Thus, MW treatment presented itself as an effective process for increasing eucalyptus impregnability, and it has the potential to augment southern blue gum's use as a raw sawn and engineered structural wood material worldwide.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Wood Treatment and Properties · Tree Root and Stability Studies · Lignin and Wood Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (94)

Show source-provided references
1. Some technological properties of wood-styrofoam composite panels10.1016/j.compositesb.2013.07.024 ↗
2. Whole timber construction: a state of the art review10.1016/j.conbuildmat.2019.03.043 ↗
3. Innovation potential of wood constructions in the context of sustainability and efficiency of the construction industry10.1016/j.jclepro.2023.137209 ↗
4. Effects on global forests and wood product markets of increased demand for mass timber10.3390/su132413943 ↗
5. Engineering wood products from Eucalyptus spp.10.1155/2022/8000780 ↗
6. S. Aicher, Z. Christian, G. Dill-Langer, Hardwood glulams – emerging timber products of superior mechanical properties, in: Proceedings of the World Conference on Timber Engineering (WCTE 2014), Quebec City, 2014. https://doi.org/10.13140/2.1.5170.1120.
7. Visual stress grading of fibre-managed plantation Eucalypt timber for structural building applications10.1016/j.conbuildmat.2018.02.090 ↗
8. ICNF, Inventário Florestal Nacional (IFN6)– Principais resultados – relatório sumário, 2019.
9. What drives Eucalyptus globulus natural establishment outside plantations? The relative importance of climate, plantation and site characteristics10.1007/s10530-017-1614-y ↗
10. Bending performance of nail-laminated timber constructed of fast-grown plantation eucalypt10.1007/s00107-019-01408-9 ↗
11. S. Cerasoli, M.C. Caldeira, J.S. Pereira, G. Caudullo, D. Rigo, Eucalyptus globulus and other eucalypts in Europe: distribution, habitat, usage and threats, in: Proceedings of the European Atlas of Forest Tree Species, 2016, 90–91. 〈https://w3id.org/mtv/FISE-Comm/v01/e01b5bb〉.
12. Challenges of wood modification process for plantation eucalyptus: a review of Australian setting10.5658/WOOD.2021.49.2.191 ↗
13. Cradle-to-gate life cycle assessment of Eucalyptus globulus short rotation plantations in Chile10.1016/j.jclepro.2015.02.085 ↗
14. Finger-jointed Eucalyptus globulus with 1C-PUR adhesive for high performance engineered laminated products10.1016/j.conbuildmat.2017.01.004 ↗
15. C. Martins, A.M.P.G. Dias, H. Cruz, Blue gum: Assessment of its potential for load bearing structures, in: Proceedings of the Seventh - International Scientific Conference on Hardwood Processing, 2019, 104–111.
16. Bending and compression strength of Portuguese Maritime pine small-diameter poles
17. Analysis of the nonlinear behavior of timber-concrete connections10.1061/(ASCE)ST.1943-541X.0000523 ↗
18. Evaluation of the physical and mechanical properties of particleboard made from the needle litter of Pinus pinaster Ait10.1016/j.indcrop.2007.03.016 ↗
19. Flexural performance of cross-laminated timber constructed from fibre-managed plantation eucalyptus10.1016/j.conbuildmat.2019.03.010 ↗
20. What to do with structurally low-grade wood from Australia’s plantation eucalyptus; Building application?
21. Eucalyptus globulus finger jointed solid timber and glued laminated timber with superior mechanical properties: characterisation and application in strained gridshells10.1016/j.conbuildmat.2020.120355 ↗
22. Rolling shear properties of cross-laminated timber made of fibre-managed plantation eucalyptus under short-span bending10.1080/17480272.2021.1942201 ↗
23. Drying eucalypts for quality: material characteristics, pre-drying treatments, drying methods, schedules and optimisation of drying quality
24. A review of eucalyptus wood collapse and its control during drying10.15376/biores.13.1.Yang ↗
25. High-intensity microwave wood modification for increasing permeability
26. Improving impregnation and penetration properties of refractory woods through cryogenic treatment
27. Uptake of insecticides and fungicides by impregnable and refractory coniferous wood species treated with commercial bio-based emulsion gel formulations
28. CEN, EN 350, Durability of Wood and Wood-Based Products - Testing and Classification of the Durability to Biological Agents of Wood and Wood-Based Materials Durabilité. (2016) Brussels.
29. Life cycle assessment of a preservative treated wooden deck10.1080/17480272.2021.1897673 ↗
30. Improvement of technological quality of eucalypt wood by heat treatmentin air at 170-200 °C
31. A review of wood modification globally – updated findings from COST FP140710.37947/ipbe.2020.vol1.1 ↗
32. Review of functional treatments for modified wood10.3390/coatings11030327 ↗
33. Microwave drying kinetics of jack pine wood: determination of phytosanitary efficacy, energy consumption, and mechanical properties10.1007/s00107-018-1316-x ↗
34. Temperature characteristics of wood during microwave treatments10.1007/s11676-018-0599-4 ↗
35. Selected physical and mechanical properties of microwave heat treated rubberwood (Hevea brasiliensis)10.3390/app10186273 ↗
36. Effect of microwave treatment on longitudinal air permeability and preservative uptake characteristics of chir pine wood
37. Effects of microwave treatment on microstructure of Chinese fir10.3390/f11070772 ↗
38. The effects of increasing preservative uptake by microwave pre-treatment on the microstructure and mechanical properties of Oriental spruce wood
39. Effect of microwave treatment on the impregnability and mechanical properties of Eucalyptus globulus wood
40. Microwave chemistry, recent advancements, and eco-friendly microwave-assisted synthesis of nanoarchitectures and their applications: a review
41. 3D finite element enthalpy method for analysis of phytosanitary treatment of wood by microwave10.1007/s00107-020-01534-9 ↗
42. A review of radio frequency and microwave sustainability-oriented technologies
43. Effect of microwave treatment on bending properties of carbon nanotube/wood plastic composites by selective laser sintering10.1016/j.matlet.2020.127547 ↗
44. Microwave technology as a new tool to improve microbiological control of oak barrels: a preliminary study10.1016/j.foodcont.2012.08.008 ↗
45. State of the art of microwave treatment of wood: literature review10.3390/f12060745 ↗
46. Analysis of the influence of microwave treatment parameters of wood10.3390/f14020194 ↗
47. Effects of different energy intensities of microwave treatment on heartwood and sapwood microstructures in Norway spruce10.3390/f12050598 ↗
48. Effects of microwave pretreatment on drying of 50 mm-thickness Chinese fir lumber10.1186/s10086-021-01942-2 ↗
49. Analysis of influencing factors on sound absorption capacity in microwave-treated Pinus radiata wood10.1007/s00107-021-01774-3 ↗
50. Microwave drying of scots pine lumber: structure changes, its effect on liquid permeability10.32604/jrm.2023.022097 ↗
51. Microwave treatment for enhancing the liquid permeability of Chinese fir10.15376/biores.9.2.1924-1938 ↗
52. Effect of microwave pre-treatment on preservative retention and treatability of Melia composita wood10.17221/39/2019-JFS ↗
53. Effect of microwave heating on pH and termite resistance of Pinus roxburghii Wood
54. Microwave treatments and their effects on selected properties of Portuguese Pinus pinaster Aiton. and Eucalyptus globulus Labill
55. Splitting capacity of Eucalyptus globulus beams loaded perpendicular to the grain by connections
56. ISO, ISO 13061–2, Physical and Mechanical Properties of Wood — Test Methods for Small Clear Wood Specimens - Part 2: Determination of Density for Physical and Mechanical Tests, Switzerland (2014).
57. The Influence of microwave heating on the mechanical properties of wood10.1016/S0924-0136(99)00454-9 ↗
58. A.C. Metaxas, R.J. Meredith, Industrial Microwave Heating, third ed., Short Run Press Ltd, Exeter, 2008. https://doi.org/10.1080/08327823.1989.11688082.10.1080/08327823.1989.11688082 ↗
59. Microwave radiation effect on axial fluid permeability in false heartwood of beech (Fagus sylvatica L.)
60. L. Nunes, B. Esteves, State of the art of industrial wood protection in Portugal, in: Proceedings Forty Seventh IRG Annual Meeting (ISSN 2000–8953), Lisbon, 2016. Lisbon, Portugal, 15–19 May, 1–7.
61. Characterization of tanalith E treated wood flour filled polylactic acid composites10.1016/j.polymertesting.2019.03.037 ↗
62. Efficacy of CCA and Tanalith E treated pine fence to fungal decay after ten years in service
63. ISO, ISO 13061–3, Physical and Mechanical Properties of Wood — Test Methods for Small Clear Wood Specimens — Part 3: Determination of Ultimate Strength in Static Bending. (2014) Switzerland.
64. ISO, ISO 13061–4, Physical and Mechanical Properties of Wood — Test Methods for Small Clear Wood Specimens — Part 4: Determination of Modulus of Elasticity in Static Bending. (2014) Switzerland.
65. ISO, 13061–17, Physical and Mechanical Properties of Wood — Test Methods for Small Clear Wood Specimens —Part 17:Determination of Ultimate Stress in Compression Parallel to Grain. (2017). 〈https://standards.iteh.ai/catalog/standards/sist/f061ba76-cdd8–4b3c-b717-www.iso.orgiTehSTANDARDPREVIEWhttps://standards.iteh.ai/catalog/standards/sist/f061ba76-cdd8–4b3c-b717-〉.
66. Minitab, Minitab, Software Minitab 18 (2018).
67. Correlation analysis and statistical assessment of early hydration characteristics and compressive strength for multi-composite cement paste10.1016/j.conbuildmat.2021.125260 ↗
68. Dependency measures for the diagnosis of local faults in application to the heavy-tailed vibration signal10.1016/j.apacoust.2021.107974 ↗
69. CEN, EN 335, Durability of Wood and Wood-Based Products. Use Classes: Definitions, Application to Solid Wood and Wood-Based Products (2013) Brussels.
70. YOU Solutions Germany GmbH, Resumo das características do produto biocida (SPC BP), 2023.
71. Forest Products Laboratory, Wood Handbook, 2021. 〈http://sheltercentre.org/sites/default/files/wood_handbook_fpl_2010.pdf〉.
72. Effect of microwave heating on pH and durability of Eucalyptus tereticornis wood
73. Opportunities and challenges of Eucalyptus plantations in Europe: the Iberian Peninsula experience10.1007/s10342-021-01358-z ↗
74. Automatic estimation of annual ring profiles in Norway spruce timber boards using optical scanning and deep learning10.1016/j.compstruc.2022.106912 ↗
75. Long-term behaviour of Norway spruce glulam loaded perpendicular to grain10.1007/s00107-019-01437-4 ↗
76. Comparison of growth and wood quality of Norway spruce and European larch: effect of previous land use10.1007/s10342-020-01259-7 ↗
77. Modeling the earlywood and latewood growth rings of norway spruce timber beams for finite element calculation10.37763/wr.1336-4561/68.1.2843 ↗
78. The potential of uncoated norway spruce as a Façade material—a review10.3390/f14061153 ↗
79. Microwave wood modification technology and its applications
80. The wood from the trees: the use of timber in construction10.1016/j.rser.2016.09.107 ↗
81. Mechanical properties of small clear specimens of Eucalyptus globulus labill10.3390/ma13040906 ↗
82. Brittleness increase in Eucalyptus wood after thermal treatment10.1080/20426445.2020.1719298 ↗
83. Effects of heat treatment on brittleness of Styrax tonkinensis wood10.1007/s10086-006-0841-0 ↗
84. Microwave treatment of Eucalyptus macrorhyncha timber for reducing drying defects and its impact on physical and mechanical wood properties10.1007/s00107-017-1260-1 ↗
85. J.E. Gordon, Structures or Why things don’t fall down, 2003.
86. Mechanical properties of wood: a Review10.3390/f14061202 ↗
87. SIMPOLE - simulation of wood poles mechanical behaviour10.15376/biores.7.3.3439-3451 ↗
88. Wood-polymer composites prepared by free radical in situ polymerization of methacrylate monomers into fast-growing pinewood10.1007/s00226-015-0761-5 ↗
89. Bending, shear, and compressive properties of three- and five-layer cross-laminated timber fabricated with black spruce10.1186/s10086-020-01886-z ↗
90. The effect of thinning on mechanical properties of Douglas fir, Norway spruce, and Sitka spruce10.1007/s13595-018-0787-6 ↗
91. Investigation on mechanical and physical properties of Sri Lankan timber species for construction applications
92. Alpo. Ranta-Maunus, Round Small-diameter Timber for Construction: Final Report of Project FAIR CT 95–0091, Technical Research Centre of Finland, 1999.
93. The effect of microwave drying on Norway spruce woods strength: a comparison with conventional drying10.1016/S0924-0136(02)01102-0 ↗
94. Temperature and moisture profiles at microwave heating of wood, Annals of Warsaw University of Life Sciences - SGGW