Experimental study on the long-term performance of sisal fiber reinforced high-performance concrete subjected to drying-wetting cycles
Source abstract
Abstract
Plant fibers have been gradually used in cement concrete. However, the long-term performance of high-performance concrete (HPC) reinforced with plant fibers has yet to be studied. This paper investigated the degradation of sisal fiber in HPC subjected to 9 months of drying-wetting cycles. The mechanical properties of HPC specimens were tested, and the degradation of sisal fibers in the HPC matrix was characterized by thermogravimetric analysis, X-ray diffractometer, X-ray photoelectron spectroscopy, and scanning electron microscope. After drying-wetting cycles for 9 months, the mechanical properties of the HPC specimens showed little change (within 10 %); the lignin content of sisal fiber was significantly reduced (the C1/C2 value was decreased by 68.9 %), and a portion of the cellulose was also subjected to alkaline hydrolysis, but there was no significant mineralization phenomenon. Therefore, sisal fiber reinforced HPC has good long-term performance under drying-wetting cycle conditions, but its durability under the coupling of multiple deterioration factors still needs further exploration. • The long-term performance of sisal fiber reinforced UHPC was investigated. • The mechanical properties of UHPC were not affected by drying-wetting cycles. • The sisal fibers inside the UHPC did not exhibit obvious degradation characteristics.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Study on the fracture mechanical properties of high performance concrete (HPC) with rapid cooling after high temperature10.1016/j.conbuildmat.2024.135718 ↗
2. Experimental and analytical investigation on the combined effect of repeated loading and chloride exposure on the flexural performance of HPC beams10.1016/j.conbuildmat.2024.136831 ↗
3. A review on strength development of high performance concrete10.1016/j.conbuildmat.2021.124865 ↗
4. Recent trends in ultra-high performance concrete (UHPC): current status, challenges, and future prospects10.1016/j.conbuildmat.2022.129029 ↗
5. Mechanical and rheological properties of High-Performance concrete (HPC) incorporating waste glass as cementitious material and fine aggregate10.1016/j.conbuildmat.2023.131656 ↗
6. Development of a sustainable binder made of recycled high-performance concrete (HPC)
7. Effect of recycled ceramic aggregate on hydration heat and permeability of high performance concrete10.1016/j.cemconcomp.2023.104930 ↗
8. Fire behaviour and design of hybrid fibre reinforced high-performance concrete columns subjected to uniaxial bending10.1016/j.engstruct.2021.113425 ↗
9. Contribution of fiber alignment on flexural properties of UHPC and prediction using the Composite Theory10.1016/j.cemconcomp.2021.103971 ↗
10. Internal curing for high-performance concrete by a green composite capsule10.1016/j.cemconcomp.2022.104867 ↗
11. High performance concrete under elevated temperatures10.1016/j.conbuildmat.2013.03.005 ↗
12. Performance of internal curing materials in high-performance concrete: A review10.1016/j.conbuildmat.2021.125250 ↗
13. Utilization of natural sisal fibers to manufacture eco-friendly ultra-high performance concrete with low autogenous shrinkage10.1016/j.jclepro.2021.130105 ↗
14. Utilization of hybrid sisal and steel fibers to improve elevated temperature resistance of ultra-high performance concrete10.1016/j.cemconcomp.2022.104555 ↗
15. Self-healing of slag-cement ultra-high performance steel fiber reinforced concrete (UHPFRC) containing sisal fibers as healing conveyor
16. Effectiveness of treated flax fibers in improving the early age behavior of high-performance concrete
17. Influence of sisal fibers on the mechanical performance of ultra-high performance concretes10.1016/j.conbuildmat.2021.122958 ↗
18. Degradation mechanisms of natural fiber in the matrix of cement composites10.1016/j.cemconres.2015.02.019 ↗
19. The effect of a zirconium dioxide sol-gel treatment on the durability of flax reinforcements in cementitious composites10.1016/j.cemconres.2018.10.004 ↗
20. Degradation rate of natural fiber in cement composites exposed to various accelerated aging environment conditions10.1016/j.corsci.2014.07.029 ↗
21. Composition of reactive powder concretes10.1016/0008-8846(95)00144-2 ↗
22. Insights into thermal stability and interface bond performance of sisal fiber in ultra-high performance concrete under different curing conditions10.1016/j.cemconcomp.2022.104910 ↗
23. Chinese National Standard, Chinese Cement, Common Portland Cement, GB175-2007, Beijing, 2007.
24. Mercerization of sisal fibers: Effect of tension on mechanical properties of sisal fiber and fiber-reinforced composites10.1016/j.compositesa.2010.05.007 ↗
25. Utilization of rice husk ash in green natural fiber-reinforced cement composites: mitigating degradation of sisal fiber10.1016/j.cemconres.2015.12.001 ↗
26. ASTM standard for Standard Practice for the Preparation of Substitute Ocean Water, Designation: D 1141 – 98 (Reapproved 2013), ASTM International, United States of America.
27. ASTM C1609/C1609M, Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete: Using Beam with Third-point Loading, ASTM International, West Conshohocken, PA, 2012.
28. Chinese National Institute of Standardization, Test Method of Cement Mortar Strength, GB/T 17671-2021, Beijing, 2021.
29. Effects of brass coating and nano-SiO2 coating on steel fiber-matrix interfacial properties of cement-based composite10.1016/j.compositesb.2020.107904 ↗
30. A study of the durability of concrete reinforced with hemp fibers exposed to external Sulfatic attack
31. Effect of curing, fibre content and exposures on compressive strength and elasticity of UHPC10.1680/adcr.13.00090 ↗
32. Effects of fiber shape, aspect ratio, and volume fraction on flexural behavior of ultra-high-performance fiber-reinforced cement composites10.1016/j.compstruct.2017.04.069 ↗
33. Degradation kinetics and aging mechanisms on sisal fiber cement composite systems10.1016/j.cemconcomp.2013.04.003 ↗
34. Improving degradation resistance of sisal fiber in concrete through fiber surface treatment10.1016/j.apsusc.2013.11.024 ↗
35. Effect of alkali treatment on physical–chemical properties of sisal fibers and adhesion towards cement-based matrices10.1016/j.conbuildmat.2022.128363 ↗
36. Determination of the pH and the free alkali metal content in the pore solution of concrete: review and experimental comparison10.1016/j.cemconres.2017.03.002 ↗
37. Application of sisal fiber powder in ultra-high performance concrete: A renewable material for mitigating autogenous shrinkage10.1016/j.conbuildmat.2024.136304 ↗
38. The improved resistance against the degradation of sisal fibers under the environment of cement hydration by surface coating of graphene oxide (GO) based membranes10.1016/j.conbuildmat.2021.124694 ↗
39. An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer10.1177/004051755902901003 ↗
40. Molecular grafting of nanoparticles onto sisal fibers-adhesion to cementitious matrices and novel functionalities10.1016/j.molstruc.2021.130171 ↗
41. Using sol-gel deposition of nanosilica to enhance interface bonding between sisal fiber and ultra-high performance concrete10.1016/j.cemconcomp.2022.104705 ↗
42. Degradation behavior and kinetics of sisal fiber in pore solutions of sustainable cementitious composite containing metakaolin10.1016/j.polymdegradstab.2018.01.027 ↗
43. Sustainable thermoplastic bio-based materials from sisal fibers10.1016/j.jclepro.2020.121631 ↗
44. Analyses of the Chemical Compositions and Structures of Four Bamboo Species and their Natural Fibers by Infrared, Laser, and X-ray Spectroscopies10.1007/s12221-021-0303-8 ↗
45. Surface chemical composition analysis of heat-treated bamboo10.1016/j.apsusc.2016.03.015 ↗
46. FTIR and XPS analysis of the changes in bamboo chemical structure decayed by white-rot and brown-rot fungi10.1016/j.apsusc.2013.05.065 ↗
47. Biomodification of Bond Performance of Coconut Fiber in Cement Mortar to Enhance Damping Behavior10.1061/JMCEE7.MTENG-15933 ↗
48. Surface Characterization of Alkali Treated Kenaf Fibers by XPS and AFM10.4028/www.scientific.net/KEM.694.29 ↗
49. Durability of alkali-sensitive sisal and coconut fibres in cement mortar composites10.1016/S0958-9465(99)00039-6 ↗
50. Improving degradation resistance of Ensete ventricosum fibre in cement-based composites through fibre surface modification10.1016/j.cemconcomp.2023.105398 ↗