Study on fracture characteristics of steel fiber reinforced manufactured sand concrete using DIC technique
Source abstract
Abstract
Incorporation of steel fibers to improve the defects of manufactured sand concrete (MSC) has received a great deal of attention, while the fracture mechanism of the MSC by volume fraction of steel fibers (Vf) has been less studied. To investigate the effects of steel fibers on the fracture characteristics of the MSC, three-point bending tests were conducted on the MSC beams with different Vf (0, 0.5%, 1.0% and 1.5%) using digital image correlation technique. The effects of Vf on the fracture parameters and crack propagation paths of steel fiber reinforced manufactured sand concrete (SFRMSC) were analyzed. In addition, fracture process zone (FPZ) of the SFRMSC was analyzed via the length of the FPZ (lFPZ) and area of the FPZ (AFPZ). The results indicated that the residual strength, initiation fracture toughness, unstable fracture toughness, fracture energy and characteristic length of the SFRMSC increased with the increase of Vf, whereas the crack propagation paths were not sensitive to the changes of Vf. The addition of steel fibers increased the interaction between the aggregate and the matrix, which led to an increase in the number of microcracks. Before approaching the Pc, both the lFPZ and AFPZ showed essentially stable changes. As Vf increased, the lFPZ and AFPZ developed faster to their corresponding maximum values. The AFPZ reached a maximum and increased with the Vf. At the Pc, the lFPZ and AFPZ changed in a similar trend when Vf ≤ 1.0%. When Vf > 1.0%, the lFPZ changed slightly while AFPZ increases sharply.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Rock Mechanics and Modeling · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Time is running out for sand10.1038/d41586-019-02042-4 ↗
2. Uncovering the lack of awareness of sand mining impacts on riverbank erosion among Mekong Delta residents: insights from a comprehensive survey10.1038/s41598-023-43114-w ↗
3. Environmental impacts of sand exploitation. Analysis of sand market10.3390/su9071118 ↗
4. An investigation into the use of manufactured sand as a 100% replacement for fine aggregate in concrete10.3390/ma9060440 ↗
5. Study on fracture parameters and fracture process zone of manufactured-sand recycled aggregate concrete10.1016/j.conbuildmat.2022.129613 ↗
6. Performance evaluation of cement mortar produced with manufactured sand and offshore sand as alternatives for river sand10.1016/j.conbuildmat.2021.123784 ↗
7. Effects of fiber properties on flexural and fracture characteristics of manufactured sand concrete based on acoustic emission
8. Research history of mountain sand and mountain sand concrete
9. Coupled effects of the content and methylene blue value (MBV) of microfines on the performance of manufactured sand concrete10.1016/j.conbuildmat.2019.117953 ↗
10. Synergy of inert granite powder and active mineral admixture in manufactured sand mortar: The effect on mechanical properties, chloride permeability and water absorption properties10.1016/j.conbuildmat.2023.133660 ↗
11. Wang · 2023 · 1
12. Study on axial compressive behavior and damage constitutive model of manufactured sand concrete based on fluidity optimization10.1016/j.conbuildmat.2022.128176 ↗
13. Fracture properties of steel fiber reinforced high strength concrete using work of fracture and size effect methods10.1016/j.conbuildmat.2017.03.089 ↗
14. Evolution of the FPZ in steel fiber-reinforced concrete under dynamic mixed-mode loading10.1016/j.conbuildmat.2023.131110 ↗
15. Digital imaging monitoring of fracture processes in hybrid steel fiber reinforced concrete10.1016/j.compstruct.2022.116005 ↗
16. Crack propagation analysis of synthetic vs. steel vs. hybrid fibre-reinforced concrete beams using digital image correlation technique10.1186/s40069-020-00427-8 ↗
17. Experimental study on the mix proportion of machine-made sand concrete from tunnel cinder
18. Contribution of steel fiber to the mechanical property improvement of C80 concrete produced with a high amount of artificial sand powder10.3390/buildings13030602 ↗
19. Flexural cracking behavior of normal strength, high strength and high strength fiber concrete beams, using Digital Image Correlation technique10.1016/j.conbuildmat.2015.12.166 ↗
20. A review on fracture properties of steel fiber reinforced concrete
21. Combined effects of steel fibers and water to cementitious materials ratio on the fracture behavior and brittleness of high strength concrete10.1016/j.engfracmech.2019.106517 ↗
22. Effects of alkaline solution to binder ratio on fracture parameters of steel fiber reinforced heavyweight geopolymer concrete10.1016/j.tafmec.2021.102967 ↗
23. Fracture behavior and mechanical properties of concrete with artificial lightweight aggregate and steel fiber10.1016/j.conbuildmat.2015.03.054 ↗
24. Fracture process zone in notched concrete beam under three-point bending by acoustic emission10.1016/j.conbuildmat.2014.05.012 ↗
25. Size effects on the characteristics of fracture process zone of plain concrete under three-point bending10.1016/j.conbuildmat.2021.125725 ↗
26. Fracture process zone of high-strength concrete under monotonic and cyclic loading10.1016/j.engfracmech.2022.108973 ↗
27. Modelling fracture process zone width and length for quasi-brittle fracture of rock, concrete and ceramics10.1016/j.engfracmech.2021.108158 ↗
28. Influence of local fracture energy distribution on maximum fracture load of three-point-bending notched concrete beams10.1016/j.engfracmech.2011.09.019 ↗
29. Boundary effect on concrete fracture and non-constant fracture energy distribution10.1016/S0013-7944(02)00223-0 ↗
30. Standard for test methods of concrete physical and mechanical properties, GB/T50081-2019, China Architecture & Building Press (2019).
31. Steel Fiber Concrete, JGT 472-2015, China Architecture & Building Press (2015).
32. Size-effect method for determining fracture energy and process zone size of concrete10.1007/BF02472030 ↗
33. Shilang · 1991
34. Test method for metallic fibered concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual, European Standard (2005).
35. An experimental study on the tensile strength of steel fiber reinforced concrete10.1016/j.compositesb.2009.12.003 ↗
36. Implications of test methodology on post-cracking and fracture behaviour of Steel Fibre Reinforced Concrete10.1016/j.compositesb.2012.10.016 ↗
37. The influences of matrix and steel fibre tensile strengths on the fracture energy of high-strength concrete10.1016/j.conbuildmat.2010.11.084 ↗
38. A study on the efficiency of steel vs. synthetic vs. hybrid fibers on fracture behavior of concrete in flexure using acoustic emission10.1016/j.conbuildmat.2018.12.011 ↗
39. An overview of the flexural post-cracking behavior of steel fiber reinforced concrete10.1002/suco.201700068 ↗
40. Code for design of concrete structures, GB 50010-2010, China Architecture & Building Press (2015).
41. Determination method and prediction model of fracture and strength of recycled aggregate concrete at different curing ages10.1016/j.conbuildmat.2022.128070 ↗
42. Crack propagation speed in ultra high performance concrete (UHPC)10.1016/j.conbuildmat.2016.03.148 ↗
43. Double-K fracture criterion for crack extension in concrete structures
44. Crack extension resistance and fracture properties of quasi-brittle softening materials like concrete based on the complete process of fracture
45. Experimental investigations on fracture parameters of random and aligned steel fiber reinforced cementitious composites10.1016/j.conbuildmat.2021.122680 ↗
46. A review on concrete fracture energy and effective parameters10.1016/j.cemconres.2019.03.013 ↗
47. Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams
48. The theoretical basis of a method to determine the fracture energy GF of concrete
49. The effect of steel fibres on the enhancement of flexural and compressive toughness and fracture characteristics of oil palm shell concrete10.1016/j.conbuildmat.2013.12.103 ↗
50. Energy dissipation during fracturing process of nuclear graphite based on cohesive crack model10.1016/j.engfracmech.2020.107426 ↗
51. Variation of fracture energy dissipation along evolving fracture process zones in concrete10.1061/(ASCE)0899-1561(2007)19:8(625) ↗
52. An experimental investigation on FPZ evolution of concrete at different low temperatures by means of 3D-DIC10.1016/j.tafmec.2020.102575 ↗
53. P. Petersson, Crack growth and development of fracture zones in plain concrete and similar materials, Division of Building Materials (1981), 〈http://lup.lub.lu.se/record/1272935〉.
54. Development of fracture process zone in full-graded dam concrete under three-point bending by DIC and acoustic emission10.1016/j.engfracmech.2020.106972 ↗