Influence of different types of superabsorbent polymers on fresh mechanical properties and interlayer adhesion of 3D printed concrete
Source abstract
Abstract
3D printed concrete (3DPC) is an essential technology for achieving efficient, precise, and sustainable construction. Nevertheless, due to limitations in materials and processes, 3DPC is prone to insufficient green strength and weakness in the interlayer area, which can result in print collapse and diminish its interlayer adhesion strength. Therefore, understanding green strength and interlayer adhesion strength of 3DPC is crucial for ensuring its structural safety. Superabsorbent polymer (SAP) serves as a novel type of concrete admixture, demonstrating the potential to promote green strength development and augment interlayer adhesion properties by facilitating the hydration process through water absorption and release. This study presents the first investigation into the effects of two commercially available SAPs on green strength and interlayer adhesion of 3D printed concrete. The role of SAP in improving interlayer adhesion performance in 3DPC is further elucidated through X-ray diffraction (XRD), Scanning electron microscopy (SEM). The results indicate that, compared to the control group, in the absence of added compensated water to SA1, the compressive strength at 15 min and splitting tensile strength of the printed specimen at 28 d increased by 282 % and 24.9 %, respectively, whereas SA2 demonstrates a relatively weaker enhancement effect. This study demonstrates that SAP promotes structural accumulation during the 3DPC printing stage, thereby presenting itself as a favorable material choice for applications involving 3DPC.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Vision of 3D printing with concrete — technical, economic and environmental potentials10.1016/j.cemconres.2018.06.001 ↗
2. Influence of hydroxypropyl methylcellulose and silica fume onstability, rheological properties, and printability of 3D printing foam concrete10.1016/j.cemconcomp.2021.104158 ↗
3. 3D printing trends in building and construction indus-try: a review10.1080/17452759.2017.1326724 ↗
4. Mix design and fresh properties for high-performance printing concrete10.1617/s11527-012-9828-z ↗
5. Leveraging internal curing effect of fly ash cenosphere for alleviating autogenous shrinkage in 3D printing10.1016/j.conbuildmat.2022.128247 ↗
6. Printability and particle packing of 3D-printable limestone calcined clay cement composites10.1016/j.conbuildmat.2021.122647 ↗
7. Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing10.1080/17452759.2016.1209867 ↗
8. Design of a 3D printed concrete bridge by testing10.1080/17452759.2018.1476064 ↗
9. Application of concrete 3D printing for bridge construction:current challenges and future directions
10. Application of robot 3D printing technology in park construction -- introduction of Shenzhen Baoan 3D Printing Park printing construction
11. Robot-based facade spatial assembly optimization
12. Rheological requirements for printable concretes10.1016/j.cemconres.2018.04.005 ↗
13. Durability properties of 3D printed concrete (3DPC)10.1016/j.autcon.2022.104479 ↗
14. The relationship between the rheological behavior and interlayer bonding properties of 3D printing cementitious materials with the addition of attapulgite10.1016/j.conbuildmat.2021.125809 ↗
15. Bonding performance of 3D printing concrete with self-locking interfaces exposed to compression–shear and compression–splitting stresses
16. Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing10.1016/j.conbuildmat.2019.05.053 ↗
17. Rheology and shrinkage of concrete using polypropylene fiber for 3D concrete printing
18. Effects of superabsorbent polymer on interfacial transition zone and mechanical properties of ultra-high performance concrete10.1016/j.conbuildmat.2019.04.237 ↗
19. Cement-based materials modified with superabsorbent polymers: a review10.1016/j.conbuildmat.2019.07.139 ↗
20. Basic tensile creep of concrete with and without superabsorbent polymers at early ages10.1016/j.conbuildmat.2021.126180 ↗
21. Internal curing with superabsorbent polymers of different chemical structures10.1016/j.cemconres.2019.105789 ↗
22. Application of superabsorbent polymers (SAP) in concrete construction[J]
23. Evaluation of the shrinkage and fracture properties of hybrid fiber-reinforced SAP modified concrete[J]10.1016/j.conbuildmat.2020.119491 ↗
24. Modelling the interlayer bond strength of 3D printed concrete with surface moisture10.1016/j.cemconres.2021.106559 ↗
25. Can superabsorbent polymers be used as rheology modifiers for cementitious materials in the context of 3D concrete printing?[J]10.1016/j.conbuildmat.2023.130777 ↗
26. Shrinkage behavior of cementitious 3D printing materials: effect of temperature and relative humidity[J]10.1016/j.cemconcomp.2021.104238 ↗
27. The effect of air-entraining admixture and superabsorbent polymer on bond behaviour of steel rebar in pre-cracked and self-healed concrete10.1016/j.conbuildmat.2021.122568 ↗
28. Recommendation of RILEM TC 260-RSC: testing sorption by superabsorbent polymers (SAP) prior to implementation in cement-based materials10.1617/s11527-018-1242-8 ↗
29. Feasibility study of using desalination brine to control the stiffness and early-age hydration of 3D printable cementitious materials10.1016/j.jclepro.2022.134522 ↗
30. Chinese National Standard, Standard for test method of performance on ordinary fresh concrete, GB/T 50080-2016.
31. Mechanical behavior of 3D printed mortar with recycled sand at early ages10.1016/j.conbuildmat.2020.118654 ↗
32. Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing10.1016/j.cemconres.2018.02.001 ↗
33. Chinese National Standard, Technical specification for concrete 3D printing, T/CECS 786-2020.
34. Chinese National Standard, Test methods for building waterproofing coatings, GB/T 16777-2008.
35. Properties, mechanism, and optimization of superabsorbent polymers and basalt fibers modified cementitious composite[J]10.1016/j.conbuildmat.2020.122212 ↗
36. Microstructure and water retention kinetics in autogenous cured self-compacting concrete blends using super absorbent polymer[J]10.3390/polym15183720 ↗
37. Research on water transport behaviors and hydration characteristics of internal curing pavement concrete10.1016/j.conbuildmat.2020.118714 ↗
38. Effects of superabsorbent polymer on shrinkage properties of ultra-high strength concrete under drying condition10.1016/j.conbuildmat.2019.04.237 ↗
39. Microstructural and micromechanical characteristics of ultra-high performance concrete with superabsorbent polymer (SAP)10.1016/j.cemconres.2021.106560 ↗
40. Mechanical properties of concrete with SAP. Part i: development of compressive strength
41. Crack resistance, permeability, and microstructural analysis of recycled aggregate concrete with SAP[J]10.1016/j.conbuildmat.2024.136479 ↗