Feasibility study of engineered geopolymer composites based high-calcium fly ash and micromechanics analysis
Source abstract
Abstract
Engineered geopolymer composites (EGC) have attracted much attention as green construction materials, characterized by strain-hardening behavior and multiple cracking capabilities. Nevertheless, the current utilization of low-calcium fly ash in EGC preparation poses a challenge in terms of long hardening time, which substantially affects the feasibility of applying EGC in engineering projects. The purpose of this study is to assess the potential for developing EGCs using high-calcium fly ash (HFA), explore the impact of sodium silicate (SS)-to-sodium hydroxide (SH) ratio on material properties, and perform a comparative analysis between EGCs fabricated with low-calcium fly ash (LFA) and HFA. SEM analysis elucidates that an increase in the SS-to-SH ratio exerts a favorable influence on matrix density, thereby augmenting overall strength. Nevertheless, this enhancement is accompanied by a notable reduction in tensile strain capacity. It was observed that EGC based on HFA (HFA-EGC) outperforms LFA-based EGC (LFA-EGC) in various aspects of mechanical properties. The effects of SS-to-SH ratio, LFA, and HFA on the mechanical properties were analyzed at the microscale using XRD and SEM, and combined with micromechanical parameters, establishing a multi-scale connection for material performance. The study offers a comprehensive analysis of how varying precursor and activator compositions affect the tensile properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Sakai · 2012
2. P.K. Mehta, P.J. Monteiro, Concrete: Microstructure, Properties, and Materials, McGraw-Hill Education, 2014.
3. CO2 capture technologies for cement industry10.1016/j.egypro.2009.01.020 ↗
4. Assessment of CO2 reduction of alkali-activated concrete10.1016/j.jclepro.2012.08.001 ↗
5. Alkali-activated materials10.1016/j.cemconres.2017.02.009 ↗
6. The role of inorganic polymer technology in the development of green concrete10.1016/j.cemconres.2007.08.018 ↗
7. Potential of alternative fibre cements as building materials for developing areas10.1016/S0958-9465(02)00071-9 ↗
8. Strain-hardening alkali-activated fly ash/slag composites with ultra-high compressive strength and ultra-high tensile ductility10.1016/j.cemconres.2022.107075 ↗
9. Seawater sea-sand engineered geopolymer composites (EGC) with high strength and high ductility10.1016/j.cemconcomp.2023.104998 ↗
10. Mechanical behavior of a novel precast beam-to-column connection with U-shaped bars and engineered cementitious composites10.1177/1369433218761139 ↗
11. Sustainable high strength, high ductility engineered cementitious composites (ECC) with substitution of cement by rice husk ash10.1016/j.jclepro.2021.128379 ↗
12. Correlation of flaw structure and cracking behavior in SHCC with X-ray CT scanning technique10.1016/j.conbuildmat.2022.127296 ↗
13. Mechanical properties and cracking behaviour of lightweight engineered geopolymer composites with fly ash cenospheres10.1016/j.conbuildmat.2023.132622 ↗
14. Effects of polyethylene fiber dosage and length on the properties of high-tensile-strength engineered geopolymer composite10.1061/JMCEE7.MTENG-14763 ↗
15. Engineered cementitious composites with high-volume fly ash
16. An integrated design method of Engineered Geopolymer Composite10.1016/j.cemconcomp.2018.02.001 ↗
17. Geopolymers: man-made rock geosynthesis and the resulting development of very early high strength cement
18. Progress of modification and application of coal fly ash in water treatment
19. Impact of pH and ammonia on the leaching of Cu(II) and Cd(II) from coal fly ash10.1016/j.chemosphere.2006.01.041 ↗
20. Ultra-ductile behavior of fly ash-based engineered geopolymer composites with a tensile strain capacity up to 13.710.1016/j.cemconcomp.2021.104133 ↗
21. A critical review of engineered geopolymer composite: a low-carbon ultra-high-performance concrete10.1016/j.conbuildmat.2022.128491 ↗
22. Ultra-high-ductile behavior of a polyethylene fiber-reinforced alkali-activated slag-based composite10.1016/j.cemconcomp.2016.04.002 ↗
23. Strain-hardening ambient-cured eco-friendly ductile geopolymer composites
24. Mechanical properties of high ductile alkali-activated fiber reinforced composites with different curing ages10.1016/j.conbuildmat.2021.124833 ↗
25. Strain hardening fiber reinforced alkali-activated mortar-A feasibility study10.1016/j.conbuildmat.2012.06.007 ↗
26. Role of slag in microstructural development and hardening of fly ash-slag geopolymer10.1016/j.cemconres.2012.10.004 ↗
27. Compressive strength and microstructural characteristics of class C fly ash geopolymer10.1016/j.cemconcomp.2009.11.003 ↗
28. Effect of SiO2 and Al2O3 on the setting and hardening of high calcium fly ash-based geopolymer systems10.1007/s10853-012-6353-y ↗
29. ASTM C109/C109M-20b, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars, ASTM International, West Conshohocken, PA, 2020.
30. Japan Society of Civil Engineers, Recommendations for Design and Construction of High Performance Fiber Reinforced Cement Composites with Multiple Fine Cracks (HPFRCC), Concrete Engineering Series No, 2008, p. 82.
31. Measuring and modifying interface properties of PVA fiber in ECC matrix10.1061/(ASCE)0899-1561(2001)13:6(399) ↗
32. Damping characteristics of PVA fiber-reinforced cementitious composite containing high-volume fly ash under frequency-temperature coupling effects10.1016/j.cemconcomp.2020.103911 ↗
33. Fiber-reinforced geopolymer composites: a review10.1016/j.cemconcomp.2019.103498 ↗
34. Strength and chloride ion penetration resistance of ultra-high-performance fiber reinforced geopolymer concrete10.1016/j.istruc.2021.03.112 ↗
35. Role of water in the synthesis of calcined kaolin-based geopolymer10.1016/j.clay.2008.09.003 ↗
36. The effects of inorganic salt contamination on the strength and durability of geopolymer10.1016/S0927-7757(02)00239-X ↗
37. Geopolymeric materials prepared using Class F fly ash and elevated temperature curing10.1016/j.cemconres.2004.06.031 ↗
38. Alkali-activated fly ashes: a cement for the future10.1016/S0008-8846(98)00243-9 ↗
39. Factors affecting the immobilization of metals in geopolymerized flyash10.1007/s11663-998-0032-z ↗
40. Matrix design of light weight, high strength, high ductility ECC10.1016/j.conbuildmat.2019.03.159 ↗
41. Investigation on properties of ECC incorporating crumb rubber of different sizes10.3151/jact.13.241 ↗
42. Development of high-strength and high-ductility ECC with saturated multiple cracking based on the flaw effect of coarse river sand10.1061/(ASCE)MT.1943-5533.0003405 ↗
43. Determination of double-K criterion for crack propagation in quasi-brittle fracture, part ii: analytical evaluating and practical measuring methods for three-point bending notched beams10.1023/A:1018740728458 ↗
44. J. Aveston, R.A. Mercer, J.M. Siltwood, Fiber Reinforced Cements-Scientific Foundations for Specifications. Composites Standards Testing Arid Design, Conference Proceedings National Physical Laboratory, IPC Science and Technology Press, Guildford, United Kingdom, 1974, pp. 93–103.
45. Postcrack scaling relations for fiber reinforced cementitious composites10.1061/(ASCE)0899-1561(1992)4:1(41) ↗
46. A special technique for determining the bond strength of micro-fibres in cement matrix by pullout test10.1007/BF00275353 ↗
47. Utilization of fly ash blends from pulverized coal and fluidized bed combustions in geopolymeric materials10.1016/j.cemconcomp.2010.09.017 ↗
48. New micromechanics design theory for pseudostrain hardening cementitious composite10.1061/(ASCE)0733-9399(1999)125:4(373) ↗
49. From micromechanics to structural engineering-the design of cementitious composites for civil engineering applications
50. Steady-state and multiple cracking of short random fiber composites10.1061/(ASCE)0733-9399(1992)118:11(2246) ↗
51. A J-integral method for calculating steady-state matrix cracking stresses in composites10.1016/0167-6636(88)90011-7 ↗
52. Engineered Cementitious
53. Effect of recycled tyre polymer fibre on engineering properties of sustainable strain hardening geopolymer composites10.1016/j.cemconcomp.2021.104167 ↗
54. Multiple cracking sequence and saturation in fiber reinforced cementitious composites10.3151/crt1990.9.2_19 ↗
55. Practical design criteria for saturated pseudo strain hardening behavior in ECC10.3151/jact.4.59 ↗