journal article·2023-07Open access

Assessment of the effectiveness and the initial cost efficiency of hot recycled asphalt using polymer modified bitumen

Ali Almusawi, Sarmad Shoman, Andrei P. Lupanov

Abstract

The drastic increase in environmental concerns and increasing costs of road construction materials necessitate evaluating some alternative solutions. One of the most suitable alternatives is recycling old asphalt pavement to produce reclaimed asphalt pavement (RAP). The RAP materials have been commonly combined with asphalt mixtures during pavement construction. Incorporating RAP material should demonstrate an equivalent or better performance than conventional asphalt mixtures. Conversely, the inclusion of RAP mainly needs to improve performance compared to conventional asphalt mixtures. The key issue of using RAP is to restore the loss properties of aged materials and normally asphalt Agent Rejuvenator (ARA) was used. Also, adding polymers with RAP into the asphalt mixture becomes necessary to obtain the required performance. This study investigated the RAP effects of elastomeric polymer on the performance of the asphalt mixture following Russian standards (GOST). The impact of using PMB with RAP material on the asphalt mixture’s performance was primarily considered by employing tests that can reveal the adhesion property. Additionally, the performance of the pavement was evaluated in terms of strength and low-temperature cracking. For this purpose, numerous test methods were implemented to appraise the asphalt performance, such as compressive strength, moisture susceptibility, shear resistance, tensile strength, porosity of the mineral particles, and residual porosity. The results indicated that the overall performance of the asphalt mixtures prepared with RAP and combined with polymer depicted a better performance. Moreover, the initial construction cost for each asphalt composition was estimated and compared. The utilization of PMB increased the cost of the asphalt mixture. However, such an increase in the cost would lead to an increase in the overall performance, especially for RAP mixtures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Huang · 2015
2. A review of the use of reclaimed asphalt pavement for road paving applications.10.11113/jt.v82.14320 ↗
3. The influence of waste rice straw ash as surrogate filler for asphalt concrete mixtures10.15282/construction.v2i1.7624 ↗
4. The usage of recycled glass in hot mix asphalt: a review10.15282/construction.v1i1.6324 ↗
5. Porous asphalt modification using different types of additives: a review10.15282/construction.v1i1.6502 ↗
6. Performance of glass powder as bitumen modifier in hot mix asphalt10.1016/j.pce.2022.103263 ↗
7. Laboratory evaluation on performance of recycled asphalt binder and mixtures under short-term aging conditions10.3390/su13063404 ↗
8. Comparative life cycle assessment of asphalt pavements using reclaimed asphalt, warm mix technology and cold in-place recycling10.1016/j.resconrec.2015.08.006 ↗
9. Life-cycle benefits of recycled material in highway construction10.3141/2628-01 ↗
10. Hybrid life cycle assessment for asphalt mixtures with high RAP content10.1016/j.resconrec.2013.12.004 ↗
11. Processing of old asphalt concrete at asphalt concrete plant using polymer-bitumen binder, Russian Federation, M.S. thesis
12. Laboratory evaluation of fatigue characteristics of recycled asphalt mixture10.1016/j.conbuildmat.2007.04.019 ↗
13. Performance characteristics of high reclaimed asphalt pavement containing bio-modifier10.1080/14680629.2015.1096820 ↗
14. Performance properties of high modulus asphalt concrete containing high reclaimed asphalt content and polymer modified binder10.1080/10298436.2020.1850721 ↗
15. The development of a performance specification for granular base and subbase material (No. FHWA-NJ-2005-003)
16. Characterizing temperature performance of bio-modified binders containing RAP binder10.1061/(ASCE)MT.1943-5533.0002373 ↗
17. Performance evaluation of asphalt mixtures containing high-RAP binder content and bio-oil rejuvenator
18. Influence of warm-mix asphalt technology and rejuvenator on performance of asphalt mixtures containing 50% reclaimed asphalt pavement10.1016/j.jclepro.2018.04.269 ↗
19. Using polymer modification and rejuvenators to improve the performance of high reclaimed asphalt pavement mixtures10.3141/2575-02 ↗
20. Fatigue performance of recycled hot mix asphalt: a laboratory study
21. Moisture characteristics of mixtures with warm mix asphalt technologies–a review10.1016/j.conbuildmat.2017.03.069 ↗
22. Moisture characteristics of warm mix asphalt containing reclaimed asphalt pavement (RAP) or steel slag10.1617/s11527-022-01893-0 ↗
23. Rheological and anti-moisture characteristics of rubberized reclaimed asphalt pavement with interfacial bond behavior10.1016/j.jclepro.2023.136172 ↗
24. Adhesion improvement between RAP and emulsified asphalt by modifying the surface characteristics of RAP
25. Pavement recycling guidelines for state and local governments
26. The use of rejuvenating agents in production of recycled hot mix asphalt: a systematic review10.1016/j.conbuildmat.2016.04.015 ↗
27. Sustainable use of polymer in asphalt mixture: a review10.15282/construction.v2i2.7744 ↗
28. Performance-based design of 100% recycled hot-mix asphalt and validation using traffic load simulator10.1016/j.jclepro.2019.117679 ↗
29. Experimental study of recycled asphalt mixtures with high percentages of reclaimed asphalt pavement (RAP)10.1016/j.conbuildmat.2010.09.016 ↗
30. Improving fatigue and low temperature performance of 100% RAP mixtures using a soybean-derived rejuvenator10.1016/j.conbuildmat.2017.06.099 ↗
31. A review on the durability of recycled asphalt mixtures embraced with rejuvenators10.3390/su13168970 ↗
32. Use of polymer modified binders as rejuvenators in recycled asphalt mixtures10.1007/s42947-020-6006-5 ↗
33. Effects of epoxy resin contents on the rheological properties of epoxy‐asphalt blends10.1002/app.32440 ↗
34. Rheological properties of amorphous poly alpha olefin (APAO) modified asphalt binders10.1016/j.conbuildmat.2013.07.087 ↗
35. Evaluation of recycled asphalt mixture at low temperature using different analytical solutions10.1139/cjce-2019-0303 ↗
36. Analysis of styrene-butadiene-styrene polymer modified bitumen using fluorescent microscopy and conventional test methods10.1016/j.jhazmat.2007.04.122 ↗
37. Relationship between processing parameters and aging with the rheological behaviour of SBS modified bitumen10.1016/j.conbuildmat.2019.06.081 ↗
38. Impact of molecular structure of SBS on thermomechanical properties of polymer modified bitumen10.1016/j.eurpolymj.2017.09.017 ↗
39. Laboratory investigation of compaction characteristics of plant recycled hot-mix asphalt mixture10.3390/su13063005 ↗
40. Effect of reclaimed asphalt pavement heating temperature on the compactability of recycled hot mix asphalt10.3390/ma13163621 ↗
41. A relative assessment of the life-cycle costs of rigid and flexible pavement coatings in turkey