Direct shield cutting of large-diameter reinforced concrete group piles: Case study on Shenyang Metro construction
Source abstract
Abstract
Increasing demand for subways or metros has resulted in the need to build new tunnels in close proximity of pile foundations of existing underground structures. This study presents the details of cutting of existing large diameters reinforced concrete group piles which lie in the excavation path of the new tunnel directly by shield. Investigation is made based on the on-site case study of the construction of the right tunnel of Shenyang Metro Line 4, which crosses the Shenyang North Station of Metro Line 2. During the process, 17 reinforced concrete piles with diameters ranging from 800 to 1000 mm were cut. The details of the ground improvement, the replacement of the cutter, the cutting of the reinforced concrete piles, and the wear of the cutter are presented in this paper. From the monitoring data, it is found that the advancing speed is lower during the cutting of reinforced concrete piles, and the values of thrust and torque fluctuate. The field measurements show that the settlements and horizontal displacements in the existing tunnel and metro station are within the allowable limits when the reinforced concrete piles are cut directly with the shield. During the cutting of the reinforced concrete piles, the steel rebars usually break under tensile stress, and the tension fracture accounts for 66.2 % of the total fracture of steel rebars. The cutters installed at different heights have a cumulative effect on the cutting of piles, and the cutters installed at higher positions have a protective effect on the cutters installed at lower heights. The average wear amount of rippers at 165, 175, and 210 heights are 6 mm, 15.2 mm, and 24.8 mm respectively. The construction method used in this project can serve as a reference and experience for similar future projects.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Geotechnical Engineering and Analysis · Geotechnical Engineering and Underground Structures · Geotechnical Engineering and Soil Stabilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Why underground space should be included in urban planning policy – and how this will enhance an urban underground future10.1016/j.tust.2015.11.013 ↗
2. Interaction of twin tunnels and shallow foundation at Zand underpass, Shiraz metro, Iran10.1016/j.tust.2010.11.006 ↗
3. Effects of tunnelling on pile foundations10.1016/j.sandf.2014.04.004 ↗
4. Study on shield cutting parameters when cutting big diameter piles
5. Finite element analysis of tunnel-soil-pile interaction using displacement controlled model10.1016/j.tust.2006.08.002 ↗
6. On construction technique of soft soil shield cutting directly reinforced concrete pile foundation
7. Review and prospects on construction technologies of metro tunnels using shield tunneling method
8. Tunnelling under pile groups and rafts: numerical parametric study on tension effects10.1016/j.compgeo.2015.02.014 ↗
9. Development of removed pile method with cutting10.1016/j.tust.2005.12.058 ↗
10. Construction control for underpinning piles and their behaviour during excavation10.1680/geot.1994.44.4.681 ↗
11. An in-tunnel grouting protection method for excavating twin tunnels beneath an existing tunnel10.1016/j.tust.2017.08.002 ↗
12. Effects of advancing open face tunneling on an existing loaded pile10.1061/(ASCE)1090-0241(2005)131:2(193) ↗
13. A comparative study of protective schemes for shield tunneling adjacent to pile groups
14. Using grouting of shield tunneling to reduce settlements of overlying tunnels: case study in Shenzhen metro construction10.1061/(ASCE)CO.1943-7862.0000455 ↗
15. Damages and wear of tungsten carbide-tipped rippers of tunneling machines used to cutting large diameter reinforced concrete piles10.1016/j.engfailanal.2021.105533 ↗
16. Numerical simulation and analysis of the pile underpinning technology used in shield tunnel crossings on bridge pile foundations10.1016/j.undsp.2020.05.006 ↗
17. Pile and pile group response to tunnelling using a large diameter slurry shield – case study in Shanghai10.1016/j.compgeo.2014.03.006 ↗
18. Monitoring deformations of infrastructure networks: a fully automated GIS integration and analysis of InSAR time-series10.1177/14759217211045912 ↗
19. Large-scale underpinning for an underground urban railway station10.1016/0886-7798(92)90043-H ↗
20. C. Ministry of Housing and Urban-Rural develoment of People’s Republic of China, Technical code for protection structures of urban rail transit, 2013. (in Chinese).
21. On the use of satellite-based interferometry for structural monitoring of bridge portfolios
22. Ground movements in EPB shield tunneling of Bangkok subway project and impacts on adjacent buildings10.1016/j.tust.2012.01.003 ↗
23. Bridge responses induced by adjacent subway station construction using shallow tunneling method
24. Test study of shield cutting large-diameter reinforced concrete piles directly
25. Study on cutter configuration for directly shield cutting of large-diameter piles
26. Field test study on cutting obstacle piles directly by shield cutters
27. Field measurement analysis of the influence of double shield tunnel construction on reinforced bridge10.1016/j.tust.2018.06.018 ↗
28. Approximate pile-to-pile interaction factors between two dissimilar piles10.1016/j.compgeo.2005.11.001 ↗
29. Assessment and control of metro-construction induced settlement of a pile-supported urban overpass10.1016/j.tust.2007.06.008 ↗
30. A case history of shield tunnel crossing through group pile foundation of a road bridge with pile underpinning technologies in Shanghai10.1016/j.tust.2014.09.002 ↗
31. Study on new-style cutter for shield cutting large-diameter reinforced concrete pile
32. Case study of underground shield tunnels in interchange piles foundation underpinning construction
33. Study on interaction between dissimilar piles in layered soils10.1002/nag.893 ↗