journal article·2024-12Open access

Effect of nano-silica on the flexural behavior and mechanical properties of self-compacted high-performance concrete (SCHPC) produced by cement CEM II/A-P (experimental and numerical study)

Ahmed M. Yassin, Mohammad Mohie Eldin, Mostafa S. Omar, Mohamed Ahmed Hafez, Mohamed A. Elnaggar

Abstract

The extensive use of cement exacerbates the greenhouse effect by increasing carbon dioxide (CO2) emissions. So, many standards recommend using Portland-composite cement in construction as one of the methods for reducing CO2 emissions, especially cement CEM II/A-P. This paper presents an extensive experimental and numerical study to investigate the effect of micro and nano-silica on the flexural behavior and mechanical properties of Self-Compacted High-Performance Concrete (SCHPC) produced by cement CEM II/A-P. The extensive experimental work consisted of eight mixtures: three with micro-silica (MS), four with nano-silica (NS), and a reference mixture without silica. For both MS and NS, different percentages of adding or replacement content were tested to study their effect on the following: (a) the workability of fresh concrete, (b) concrete compressive strength, (c) splitting tensile strength, (d) flexural behavior including flexural tensile strength, and (e) the optimum percentage of each of the MS and NS to get the maximum structural and economic benefits of using for SCHPC with CEM II/A-P. Also, through a statistical program, these experimental results were used to obtain accurate formulae that could predict both the splitting tensile strength (fsp) and modulus of rupture (fctr ) for SCHPC with adding nano-silica. In addition, the numerical study verified the experimental results based on the finite element program ANSYS. The flexure behavior of SCHPC beams is verified using the Microplane model (recently added to ANSYS). The experimental results showed that adding NS is more effective than replacing or adding MS for SCHPC mixture with CEM II/A-P to increase the concrete compressive strength, splitting tensile strength, and flexural tensile strength, especially for the mixture with adding NS content of 4 %. The numerical results showed the ability of the coupled damage-plasticity microplane model to simulate the flexural behavior of the tested SCHPC beams with MS or NS well. This research confirms nano-silica's structural and economical efficiency in the behavior of SCHPC beams. It was found that the optimum percentage of adding NS is 4 % for SCHPC mixtures with CEM II/A-P.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Effect of cement type on the mechanical behavior and permeability of concrete subjected to high temperatures10.3390/ma12183021 ↗
2. The influence of the type of cement on the properties of surface cement concrete10.3390/ma15144998 ↗
3. Egyptian Organization for Standardization and Quality, Egyptian Standard, ES: 4756-1/ 2009, CEMENT PART:
4. (1) Composition, Specifications and Conformity Criteria For Common Cements, Egyptian Organization for Standardization and Quality, Egypt, 2009, p. 42.
5. European Committee for Standardization, European Standard, EN 197-1, Cement - Part 1: Composition, specifications and conformity criteria for common cements, CEN national Members, Brussels, 2000, p. 29.
6. 2010, ACI Committee 363American Concrete Institute, Farmington Hills, MI 48331, U.S.A.65, ACI Committee 363.
7. A review on eminent application and performance of nano based silica and silica fume in the cement concrete
8. 2017, ACI Committees 236 and 241American Concrete Institute34, ACI Committees 236 and 241.
9. A review of the effect of nano-silica on the mechanical and durability properties of cementitious composites10.3390/infrastructures8090132 ↗
10. A comprehensive review of cementitious composites modified with nano silica: fabrication, microstructures, properties and applications10.1016/j.conbuildmat.2023.133922 ↗
11. Effect of nano-silica on mechanical, microstructural and durability properties of cement-based materials: a review
12. Influence of nano materials on the macro and micro structural behaviour of high performance concrete using interfacial transition zone approach10.1016/j.conbuildmat.2023.132465 ↗
13. The effect of nano-SiO2 on concrete properties: a review10.1515/ntrev-2019-0050 ↗
14. Effect of micro-silica on the physical, tensile, and load-deflection characteristics of micro fiber-reinforced high-performance concrete (HPC)
15. Effect of rock flour type on rheology and strength of self-compacting lightweight concrete
16. Effect of nanomaterials additives on performance of concrete resistance against magnesium sulfate and acids10.1016/j.conbuildmat.2019.03.099 ↗
17. Effects of nano-silica modification on early age hydration process in winter construction of tunnel engineering10.1016/j.conbuildmat.2023.133804 ↗
18. Evaluation of mechanical strength, gamma-ray shielding characteristics, and ITZ microstructural properties of heavyweight concrete using nano-silica (SiO2) and barite aggregates10.1016/j.conbuildmat.2024.135483 ↗
19. Effect of nano-silica on the fresh and mechanical properties of conventional concrete10.1016/j.finmec.2022.100165 ↗
20. Hydration of portland slag cement in the presence of nano silica10.1016/j.conbuildmat.2023.132173 ↗
21. Modification mechanism of combined nanomaterials on high performance concrete and optimization of nanomaterial content
22. High-performance nano-modified concrete of increased strength and durability10.15828/2075-8545-2022-14-6-493-500 ↗
23. Influence of nano-silica on the microstructural and mechanical properties of high-performance concrete of containing EAF aggregate and processed quarry dust10.1016/j.conbuildmat.2021.124392 ↗
24. Analysis of mechanical and microstructural properties of high performance concretes containing nanosilica and silica fume
25. Direct evidence of pore structural effects on the compressive strength of lightweight cement slurry containing nano silica fume and hollow glass microspheres10.1016/j.conbuildmat.2023.134703 ↗
26. Preparation and flexural fatigue resistance of self-compacting road concrete incorporating nano-silica particles10.1016/j.conbuildmat.2021.122380 ↗
27. Mechanical properties of fiber-reinforced high-performance concrete incorporating pyrogenic nanosilica with different surface areas10.1016/j.conbuildmat.2015.10.032 ↗
28. Effects of amorphous silica on mechanical contribution of coarse aggregates in UHPC: from micromechanics to mesoscale fracture and macroscopic strength10.1016/j.cemconcomp.2023.105225 ↗
29. Mix procedure of ultra-high performance concrete containing nano-silica; advantages and challenges to achieve required characteristics10.51984/jopas.v21i4.2128 ↗
30. A multi-scale study of enhancing mechanical property in ultra-high performance concrete by steel-fiber@Nano-silica10.1016/j.conbuildmat.2022.128069 ↗
31. Effect of modified nano-SiO2 on properties and microstructure of the high-performance cementitious composites10.1016/j.conbuildmat.2023.133063 ↗
32. Mechanical and durability properties of modified high-performance mortar by using cenospheres and Nano-Silica10.1016/j.conbuildmat.2022.129782 ↗
33. Properties of rubberized engineered cementitious composites containing nano-silica10.3390/ma14133765 ↗
34. Mechanical properties and durability of geopolymer concrete based on fly ash and coal gangue under different dosage and particle size of nano silica10.1016/j.conbuildmat.2023.131622 ↗
35. High-temperature behavior of geopolymer mortar containing nano-silica10.1016/j.conbuildmat.2022.129983 ↗
36. Fresh and mechanical performances of recycled plastic aggregate geopolymer concrete modified with Nano-silica: experimental and computational investigation
37. Experimental study on the properties of ultra-high-strength geopolymer concrete with polypropylene fibers and nano-silica10.1371/journal.pone.0282435 ↗
38. Use of nano-silica sol in concrete: performance and influence mechanisms10.1016/j.conbuildmat.2023.134582 ↗
39. Experimental investigation on the performance of ground granulated blast furnace slag and nano-silica blended concrete exposed to elevated temperature10.1016/j.conbuildmat.2023.132088 ↗
40. Durability evaluation and environmental implications of blended cement with colloidal nano-silica for use in recycled fine aggregate concrete: experimental and theoretical study10.1016/j.conbuildmat.2023.132926 ↗
41. Chloride resistance of cement-based materials with paraffin emulsion-nano silica sol cured at low air pressure10.1016/j.conbuildmat.2023.132498 ↗
42. Sulphate and acid resistance of HVFA concrete incorporating nano silica10.1016/j.conbuildmat.2023.132004 ↗
43. Effect of nano and micro SiO2 on brittleness and fracture parameters of self-compacting lightweight concrete10.1016/j.conbuildmat.2021.124354 ↗
44. Effects of halloysite nanotube, nano silica and micro-silica on rheology, hardened properties and fracture energy of SCLC
45. Flexural properties of fiber reinforced concrete containing silica fume and nano-silica10.1016/j.matlet.2022.132003 ↗
46. JSCE No.15, STANDARD SPECIFICATIONS FOR CONCRETE STRUCTURES 2007 "Design", Japan Society of Civil Engineers (JSCE), Yotsuya 1-chome, Shinjuku-ku, Tokyo 160–0004, JAPAN, 2007.
47. ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318–19), American Concrete Institute, Farmington Hills, MI 48331, USA, 2019.
48. The Housing and Building National Research Center (HBRC), Egyptian Code for Design and Construction of Reinforced Concrete Structures, ECP 203–2020, Egyptian Code committee for Design and Construction of Reinforced Concrete Structures, Egypt, 2020.
49. 2007, ACI Committee 237American Concrete Institute30, ACI Committee 237.
50. BSI, Concrete. Specification, performance, production and conformity, BS EN 206:2013, BSI London, UK, 2013.
51. The Housing and Building National Research Center (HBRC), Technical specifications for self-compacting concrete Ministerial Resolution No. 360 of 2007 Permanent Committee for the Preparation of Egyptian Standards, Egypt, 2007.
52. ANSYS · 2023
53. Crack shear in concrete: crack band microflane model10.1061/(ASCE)0733-9445(1984)110:9(2015) ↗
54. Microplane model for progressive fracture of concrete and rock10.1061/(ASCE)0733-9399(1985)111:4(559) ↗
55. A comparison of damage models formulated on different material scales10.1016/j.commatsci.2003.08.029 ↗
56. Regularization of microplane damage models using an implicit gradient enhancement10.1016/j.ijsolstr.2014.06.020 ↗
57. An implicit gradient formulation for microplane Drucker-Prager plasticity10.1016/j.ijplas.2016.04.013 ↗
58. A gradient enhanced plasticity–damage microplane model for concrete10.1007/s00466-018-1561-1 ↗