Application of Taguchi approach to optimize the waste glass powder in developing eco-friendly ternary blended aluminosilicate matrix
Source abstract
Abstract
This study investigated the effects of incorporating varying proportions of waste glass powder (WGP) and fly ash (FA) on the strength characteristics of ternary blended ground granulated blast furnace slag (GGBS) based geopolymer matrix. The examination was conducted to explore the impact of different levels of substitution of WGP (ranging from 25 % to 40 %) and FA (ranging from 20 % to 35 %) in GGBS-based geopolymer concrete under conditions of ambient curing, employing Taguchi L16 optimization. An investigation into the influence of various input parameters on the compressive strength and workability results was carried out through the utilization of analysis of variance (ANOVA). The analysis based on signal to noise ratio (SNR) revealed that the most effective mix composition consisted of 30 % WGP, 20 % FA, 50 % GGBS, and an 8 M NaOH solution, yielding the highest compressive strength value of 48.3 MPa. Additionally, the examination of the microstructure and morphology of the geopolymer fragments was explored by utilizing scanning electron microscopy (SEM) in conjunction with energy dispersive spectroscopy (EDS), revealing the creation of a densely packed microstructure for the optimal blend.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Case studies in construction materials short communication A state-of-the-art on development of geopolymer concrete and its field applications Ordinary Portland cement
2. Advances in understanding alkali-activated materials10.1016/j.cemconres.2015.04.013 ↗
3. Ecofriendly geopolymer concrete: a comprehensive review10.1007/s10098-021-02085-0 ↗
4. Prediction of self-healing characteristics of GGBS admixed concrete using Artificial Neural Network10.1088/1742-6596/1716/1/012019 ↗
5. A state-of-the-art review of crushed urban waste glass used in OPC and AAMs (geopolymer): progress and challenges
6. Green concrete: by-products utilization and advanced approaches10.3390/su11195145 ↗
7. Development of high performance sustainable optimized fiber reinforced geopolymer concrete and prediction of compressive strength10.1016/j.jclepro.2020.124543 ↗
8. Prediction of material removal rate and surface roughness in hot air assisted hybrid machining on soda-lime-silica glass using regression analysis and Artificial Neural Network10.1007/s12633-020-00729-2 ↗
9. An Artificial Neural Network based prediction of mechanical and durability characteristics of sustainable geopolymer composite
10. Experimental investigation on utilization of substitute building materials in concrete using neural networks
11. Sustainable geopolymer concrete using ground granulated blast furnace slag and rice husk ash: strength and permeability properties10.1016/j.jclepro.2018.08.313 ↗
12. Improved early-age and late-age performances of calcium sulphoaluminate cement with the presence of calcium nitrate10.1016/j.conbuildmat.2022.126927 ↗
13. G. Singh, A.K. Tiwary, S. Singh, R. Kumar, J.S. Chohan, S. Sharma, C. Li, P. Sharma, A.F. Deifalla, Incorporation of Silica Fumes and Waste Glass Powder on Concrete Properties Containing Crumb Rubber as a Partial Replacement of Fine Aggregates, (2022) 1–17.10.3390/su142114453 ↗
14. Effect of waste glass incorporation on the properties of geopolymers formulated with low purity metakaolin10.1016/j.cemconcomp.2019.103492 ↗
15. Waste glass as partial mineral precursor in alkali-activated slag/fly ash system10.1016/j.cemconres.2017.08.012 ↗
16. Influence of waste glass powder as an aluminosilicate precursor in synthesizing ternary blended Alkali-activated binder10.1007/s12633-021-01533-2 ↗
17. Pozzolanic properties of agro waste ashes for potential cement replacement predicted using ANN10.1088/1742-6596/1716/1/012018 ↗
18. A Neural Network-based prediction of superplasticizers effect on the workability and compressive characteristics of portland pozzolana cement-based mortars10.1155/2023/2605414 ↗
19. Enhancing the strength properties of concrete using coconut fiber and coconut fiber ash10.1063/5.0196073 ↗
20. Effect of waste glass powder as a partial precursor in ambient cured alkali activated fly ash and fly ash-GGBFS mortars
21. Effect of soda-lime glass powder on alkali-activated binders: rheology, strength and microstructure characterization10.1016/j.conbuildmat.2020.118013 ↗
22. Sustainable utilization of waste glass in concrete: a review
23. Durability and microstructural characteristics of alkali activated materials made with waste glass as precursor: a review
24. A review on the effect of silica to alumina ratio, alkaline solution to binder ratio, calcium oxide + ferric oxide, molar concentration of sodium hydroxide and sodium silicate to sodium hydroxide ratio on the compressive strength of geopolymer concrete
25. Mechanism of geopolymerization and factors influencing its development: a review10.1007/s10853-006-0401-4 ↗
26. Aziz · Evol. Fly. Ash Geopolym Ten Years Curing Age · 2023
27. A critical review of waste glass powder as an aluminosilicate source material for sustainable geopolymer concrete production10.1007/s12633-020-00929-w ↗
28. Potential utilization of waste glass powder as a precursor material in synthesizing ecofriendly ternary blended geopolymer matrix
29. Structural and material performance of geopolymer concrete: a review10.1016/j.conbuildmat.2018.07.111 ↗
30. Structural performance of reinforced geopolymer concrete members: a review10.1016/j.conbuildmat.2016.05.088 ↗
31. Sustainable iron-rich cements: raw material sources and binder types10.1016/j.cemconres.2022.106834 ↗
32. Use of geopolymer concrete for a cleaner and sustainable environment – a review of mechanical properties and microstructure10.1016/j.jclepro.2019.03.051 ↗
33. The strength oriented mix design for geopolymer concrete using Taguchi method and Indian concrete mix design code10.1016/j.conbuildmat.2020.120853 ↗
34. A taguchi approach for optimizing design mixture of geopolymer concrete incorporating fly ash, ground granulated blast furnace slag and silica fume10.3390/cryst11111279 ↗
35. Design of geopolymer concrete with GGBFS at ambient curing condition using Taguchi method10.1016/j.conbuildmat.2017.02.131 ↗
36. Influence of various parameters on strength and absorption properties of fly ash based geopolymer concrete designed by Taguchi method10.1016/j.conbuildmat.2017.06.066 ↗
37. Analysis of the effect of processing constraints and reinforcement content in properties of aluminum hybrid composites10.1016/j.matpr.2022.08.396 ↗
38. Development of coloured glazes for tile applications using Taguchi ’ s method10.1016/j.jeurceramsoc.2010.05.016 ↗
39. Determination of optimized geopolymerization factors on the properties of pelletized fly ash aggregates10.1016/j.conbuildmat.2017.12.038 ↗
40. Synthesis of volcanic ash-based geopolymer mortar designed by the Taguchi method10.28991/CEJ-2022-08-11-016 ↗
41. Properties of fly ash geopolymer concrete designed by Taguchi method10.1016/j.matdes.2011.10.036 ↗
42. Compressive strength of ash-based geopolymers at early ages designed by Taguchi method10.1016/j.matdes.2012.01.030 ↗
43. IS 383 (2016), Coarse and Fine Aggregate for Concrete- Specification, Bur. Indian Stand. BIS, New Delhi India 110002. (2016).
44. IS:2386 (Part I), Method of Test for Aggregate for Concrete (Particle size and shape), Indian Stand. (1963) (Reaffirmed 2002).
45. The potential use of waste glass powder in slag based geopolymer concrete-an environmental friendly material
46. Reuse of waste glass powder in alkali-activated metakaolin / fly ash pastes: physical properties, reaction kinetics and microstructure10.1016/j.resconrec.2021.105721 ↗
47. Effect of varying molarity and curing conditions on the mechanical and microstructural characteristics of alkali activated GGBS binder
48. Investigation on the properties of sustainable alkali-activated GGBS mortar with nano silica and dredged marine sand: mechanical, microstructural and durability aspects
49. Durability studies on fly ash based geopolymer concrete incorporated with slag and alkali solutions
50. Evaluating the effect of intake parameters on the performance of a biogas–diesel dual-fuel engine using the Taguchi method10.1080/17597269.2017.1370885 ↗
51. 1974 · 1
52. 2004
53. Compressive strength and microstructure analysis of geopolymer paste using waste glass powder and fly ash10.1016/j.jclepro.2017.11.125 ↗
54. Strength, microstructure, efflorescence behavior and environmental impacts of waste glass geopolymers cured at ambient temperature10.1016/j.jclepro.2019.119610 ↗
55. The composition range of aluminosilicate geopolymers10.1016/j.jeurceramsoc.2004.06.001 ↗
56. Stoichiometrically controlled C-(A)-S-H/N-A-S-H gel blends via alkali activation of synthetic precursors10.1179/1743676115Y.0000000057 ↗
57. Rheology, mechanical properties and porosity of ternary alkali-activated binders based on mining mud waste with waste glass and metakaolin10.3390/civileng2010013 ↗
58. Effect of addition of GGBS and glass powder on the properties of geopolymer concrete10.1007/s40996-018-0202-4 ↗
59. A ternary optimization of alkali-activated cement mortars incorporating glass powder, slag and calcium aluminate cement10.1016/j.conbuildmat.2019.117983 ↗
60. Sustainable use of waste glass in alkali activated materials against H2SO4 and HCl acid attacks
61. Waste glass as binder in alkali activated slag–fly ash mortars10.1617/s11527-019-1404-3 ↗