journal article·2024-07Open access

Exploring the potential for carrying capacity and reusability of 3D printed concrete bridges: Construction, dismantlement, and reconstruction of a box arch bridge

Min Yang, Chao Li, Hao Liu, Longfei Huo, Xiaofei Yao, Bolin Wang, Wenqi Yao, Zedi Zhang, Jianming Ding, Yamei Zhang, Xiaojun Ding

Abstract

3D concrete printing technology has enabled the construction full-scale bridges. However, structural carbon emissions due to higher cement content and limitations of embedded reinforcement have limited its widespread adoption. This paper presents a non-reinforced 3D printed concrete box arch bridge and describes its design, construction, dismantlement, and reconstruction, as well as evaluation of the carrying capacity of reconstructed primary arch ring. The bridge adheres to current technical principles and bridge engineering specifications. By taking into account the mechanical anisotropy and primary stress characteristics of the arch, the design negates the need for reinforcement. The study showcases the reusability and potential carbon emission reduction through block printing, on-site assembly, block removal, and secondary usage. The safety of the reconstructed arch bridge was confirmed through an in-situ load test.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Technology readiness: a global snapshot of 3D concrete printing and the frontiers for development10.1016/j.cemconres.2022.106774 ↗
2. Smart materials and technologies for sustainable concrete construction
3. Additive manufacturing as an enabling technology for digital construction: a perspective on Construction 4.010.1016/j.autcon.2019.03.011 ↗
4. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
5. The realities of additively manufactured concrete structures in practice10.1016/j.cemconres.2022.106746 ↗
6. Design of a 3D printed concrete bridge by testing10.1080/17452759.2018.1476064 ↗
7. 3D printing of a post-tensioned concrete girder designed by topology optimization10.1016/j.autcon.2020.103084 ↗
8. Factors affecting 3D printing technology adaptation in construction10.1061/(ASCE)CO.1943-7862.0002034 ↗
9. S.M. Ata, A. Kazemian, A. Jafari, Application of Concrete 3D Printing for Bridge Construction: Current Challenges and Future Directions, in: F. Jazizadeh, T. Shealy, M. Garvin (Eds.), 2022: pp. 869–879.10.1061/9780784483961.091 ↗
10. Bond properties of reinforcing bar penetrations in 3D concrete printing10.1016/j.autcon.2020.103394 ↗
11. Environmental assessment of large-scale 3D printing in construction: a comparative study between cob and concrete10.1016/j.jclepro.2020.122463 ↗
12. Additive manufacturing: technology, applications, markets, and opportunities for the built environment10.1016/j.autcon.2020.103268 ↗
13. Characterizing the bond properties of automatically placed helical reinforcement in 3D printed concrete10.1016/j.conbuildmat.2022.129228 ↗
14. A direct tensile strength testing method for concrete from existing structures10.3390/civileng4010019 ↗
15. Evaluating the seismic capacity of an existing maillart-arch-type bridge: case study of viadotto olivieri10.1080/10168664.2022.2032910 ↗
16. La Martella” Split bowstring arch bridge across gravina creek: from design to construction10.1080/10168664.2021.1972777 ↗
17. Arch Bridges
18. New Alcántara Bridge in Spain10.1080/2159032X.2023.2185339 ↗
19. China Highway and Transportation Society, Covered Bridges in China, Springer Singapore, Singapore, 2021. https://doi.org/10.1007/978–981-16–6155-6.10.1007/978-981-16-6155-6 ↗
20. C. Gengnagel, O. Baverel, G. Betti, M. Popescu, M.R. Thomsen, J. Wurm, eds., Towards Radical Regeneration: Design Modelling Symposium Berlin 2022, Springer International Publishing, Cham, 2023. https://doi.org/10.1007/978–3-031–13249-0.10.1007/978-3-031-13249-0 ↗
21. Structural design and engineering of Striatus, an unreinforced 3D-concrete-printed masonry arch bridge
22. 3D construction printing standing for sustainability and circularity: material-level opportunities10.3390/ma16062458 ↗
23. Printability and pore structure of 3D printing low carbon concrete using recycled clay brick powder with various particle features
24. Principles for waste concrete recycling and basic problems of recycled concrete10.1360/TB-2022-0521 ↗
25. Reusable, 3D-printed, peroxidase mimic–incorporating multi-well plate for high-throughput glucose determination10.1016/j.snb.2017.03.054 ↗
26. Employing additive manufacturing to create reusable TPU formworks for casting topologically optimized facade panels
27. Sustainable mixes for 3D printing of earth-based constructions10.1016/j.conbuildmat.2023.132496 ↗
28. Potential development of sustainable 3D-printed meat analogues: a review10.3390/su13020938 ↗
29. Life cycle assessment (LCA) and environmental sustainability of cementitious materials for 3D concrete printing: a systematic literature review
30. Leonhardt F. Bridges: Aesthetics and Design. London: Architectural Press, 1982.
31. Review of construction and technology development of arch bridges in the world
32. Experimental frequencies and damping ratios for historical masonry arch bridges10.1016/j.conbuildmat.2014.10.044 ↗
33. Mesoscale partitioned modelling of masonry bridges allowing for arch-backfill interaction
34. Safety assessment of masonry arch bridges considering the fracturing benefit10.3390/app10103490 ↗
35. The effect of material fresh properties and process parameters on buildability and interlayer adhesion of 3D printed concrete10.3390/ma12132149 ↗
36. Mechanical properties of structures 3D printed with cementitious powders10.1016/j.conbuildmat.2015.05.132 ↗
37. A review of 3D concrete printing systems and materials properties: current status and future research prospects10.1108/RPJ-09-2016-0154 ↗
38. H. Kwon, Experimentation and analysis of contour crafting (CC) process using uncured ceramic materials, University of Southern California (2002).
39. Model assessment of a bridge by load and dynamic tests10.1016/j.engstruct.2022.115282 ↗
40. Monitoring structural responses during load testing of reinforced concrete bridges: a review10.1080/15732479.2022.2063906 ↗
41. Bridge load testing and damage evaluation using model updating method10.1016/j.engstruct.2021.113648 ↗
42. JTG/T J21–2011, Specification for Testing and Evaluating the Bearing Capacity of Highway Bridges, China Communications Press, BeiJing, (2011).
43. JTG/T J21–01-2015, Load Test Method for Highway Bridge, China Communications Press, BeiJing, (2016).