Investigation of the engineering and environmental properties of cement mortars incorporating ladle furnace steel slag
Source abstract
Abstract
While the use of ladle steel slag in concrete offers several potential advantages, there are significant research gaps that need to be addressed to promote its safe and effective utilization in the construction industry, e.g. the variations in slag properties, such as chemical composition and physical characteristics, can influence concrete performance. Moreover, even there is some research on the mechanical properties of concrete containing ladle steel slag, more in-depth studies are needed to assess the long-term durability of such concrete and the research should focus more on evaluating the environmental impact of using ladle steel slag in concrete. The paper reports the fundamental findings of a research study focused on the treatment of ladle slag to be applied as a cement substitute in the manufacturing of cement products. The research aimed to determine the optimal proportion of admixture based on treated ladle slag and evaluate the environmental properties of the resulting cement composites. The treatment process involved mechanical activation, specifically grinding the ladle slag fraction of 0/8 mm using a vibrating mill (Coarse slag) and a ball mill (Fine slag). The treated ladle slag, as an admixture, was examined in conjunction with four types of cement (CEM I, CEM II, CEM III, and CEM V). The research findings revealed that the incorporation of coarse ladle slag enhanced the workability of fresh cement paste across all tested formulations. Moreover, the utilization of treated ladle slag as an admixture in cement paste (substituting cement) exhibited a retarding effect on the setting time. As the age of the test specimens progressed (90 to180 days), the strength properties of the samples with ladle slag admixture approached those of the cement composites prepared using natural aggregates. The climate change impact of cement mortars per strength unit spanned from 0.82 to 2.75 kg CO2eq/MPa for composites incorporating finely-ground slag, and from 0.9 to 3.1 kg CO2eq/MPa for composites utilizing coarse slag. The grinding of ladle slag, even up to 30 wt.% cement replacement, did not significantly impact the overall global warming potential and climate change, considering the average mill energy consumption of 50 kWh per 1 t of material.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. A study on the change in frost resistance and pore structure of concrete containing blast furnace slag under the carbonation conditions10.1016/j.conbuildmat.2022.127295 ↗
2. Alkali-activated concrete mixes with ground granulated blast furnace slag and paper sludge ash in seawater environments
3. Influence of admixtures on the properties of alkali-activated slag mortars subjected to different curing conditions10.1016/j.matdes.2012.08.049 ↗
4. Mechanical and GWP assessment of concrete using Blast Furnace Slag, Silica Fume and recycled aggregate
5. Development of waste-based concretes containing foundry sand, recycled fine aggregate, ground granulated blast furnace slag and fly ash10.1016/j.conbuildmat.2020.121004 ↗
6. Use of recycled concrete aggregate and granulated blast furnace slag in self-compacting concrete
7. Potential of ladle furnace slag as supplementary cementitious material in concrete
8. A comprehensive review on the ground granulated blast furnace slag (GGBS) in concrete production10.3390/su14148783 ↗
9. Utilization of ladle furnace slag as cement partial replacement: influences on the hydration and hardening properties of cement10.1016/j.conbuildmat.2021.124265 ↗
10. Ladle slag characteristics and use in mortar and concrete: a comprehensive review10.1016/j.jclepro.2020.125584 ↗
11. Steel slag—its production, processing, characteristics, and cementitious properties10.1061/(ASCE)0899-1561(2004)16:3(230) ↗
12. Factors influencing the properties of a steel slag composite cement10.1680/adcr.2008.20.4.145 ↗
13. Properties and hydration of blended cements with steelmaking slag10.1016/j.cemconres.2007.03.008 ↗
14. Preparation of high performance blended cements and reclamation of iron concentrate from basic oxygen furnace steel slag10.1016/j.resconrec.2011.09.003 ↗
15. Study on engineering properties of alkali-activated ladle furnace slag geopolymer10.1016/j.conbuildmat.2016.07.068 ↗
16. Chemical, mineralogical, and morphological properties of steel slag
17. Synthesis and characterization of ladle furnace slag on the mechanical properties of self-compacting concrete
18. Roller-compacted concrete pavement made of Electric Arc Furnace slag aggregate: mix design and mechanical properties10.1016/j.conbuildmat.2017.07.240 ↗
19. The properties of concrete based on steel slag as a by-product of metallurgical production10.4028/www.scientific.net/KEM.838.10 ↗
20. Autogenous and engineered healing mechanisms of carbonated steel slag aggregate in concrete10.1016/j.conbuildmat.2015.12.191 ↗
21. Accelerated carbonation and performance of concrete made with steel slag as binding materials and aggregates10.1016/j.cemconcomp.2017.07.018 ↗
22. Mechanical and durability characteristics of concrete containing EAF slag as aggregate10.1016/j.cemconcomp.2009.05.006 ↗
23. Environmental benefit assessment of steel slag utilization and carbonation: a systematic review
24. Environmental, economic and engineering performances of aqueous carbonated steel slag powders as alternative material in cement pastes: Influence of particle size10.1016/j.scitotenv.2023.166210 ↗
25. Environmental impact assessment of building foundation in masonry family houses related to the total used building materials10.1002/ep.12307 ↗
26. EN 933–1 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method, (2012).
27. EN 1015–3. Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table). 2000., (n.d.).
28. EN 196–1. Methods of testing cement - Part 1: Determination of strength. 2016., (n.d.).
29. CSN 72 2113. Determination of the specific gravity of cement. 1989., (n.d.).
30. EN 196–6 Methods of testing cement - Part 6: Determination of fineness, (2019).
31. EN 196–3 Methods of testing cement - Part 3: Determination of setting times and soundness. 2017., (n.d.).
32. EN 1015–11 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar. 2020., (n.d.).
33. CSN 73 1316 Determination of moisture content, absorptivity and capillarity of concrete. 1, (1990).
34. ISO 14040. Environmental management - Life Cycle Assessment - Principles and Framework., (2006).
35. ISO 14044. Environmental management - Life Cycle Assessment- Requirements and guidelines., (2006).
36. SUSTAINABILITY, P. 2020. SimaPro database manual Methods library. Pré Sustainability: Amersfoort, The Netherlands., (n.d.).
37. Summary for Policymakers
38. EN 15804+A2. Sustainability of construction works - Environmental product declarations - Core rules for the product category of construction products., (2022).
39. Stocker · 2014
40. EN 12457–4. Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 I/kg for materials with particle size below 10 mm (without or with size reduction)., (2003).
41. EN 1744–3. Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates, (2003).
42. EN 14630. Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method., (2008).
43. The experimental investigation of concrete carbonation depth10.1016/j.cemconres.2004.07.025 ↗
44. CSN 72 2111. Chemical analysis of cement., (1988).
45. Hydration activity and carbonation characteristics of dicalcium silicate in steel slag: a review10.3390/met11101580 ↗
46. STN 731355–3. Durability determination of porous concrete. Durability in a chemically polluted atmosphere., (1992).
47. Enhancement of early age cementitious properties of yellow phosphorus slag via CO2 aqueous carbonation10.1016/j.cemconcomp.2022.104702 ↗
48. A 3E evaluation on the interaction between environmental impacts and costs in a hydrogen liquefier combined with absorption refrigeration systems10.1016/j.applthermaleng.2019.113798 ↗
49. The potential of ladle slag and electric arc furnace slag use in synthesizing alkali activated materials; the influence of curing on mechanical properties10.3390/ma12071173 ↗
50. High performance cementitious composite from alkali-activated ladle slag reinforced with polypropylene fibers10.1016/j.cemconcomp.2018.03.024 ↗
51. Strength and workability of masonry mortars manufactured with ladle furnace slag10.1016/j.resconrec.2009.04.015 ↗
52. Production of durable self-compacting concrete using ladle furnace slag (LFS) as filler material10.1016/j.proeng.2015.06.184 ↗
53. Performance of ladle furnace slag in mortar under standard and accelerated curing
54. Ladle furnace slag as binder for cement-based composites10.1061/(ASCE)MT.1943-5533.0002061 ↗
55. Design and elaboration of concrete mixtures using steelmaking slags
56. Ladle furnace slag as a partial replacement of Portland cement10.1016/j.conbuildmat.2021.123106 ↗
57. Eco-efficiency of manufacturing processes: a grinding case10.1016/j.cirp.2012.03.029 ↗
58. Effect of low-calcium coal bottom ash as fine aggregate on microstructure and properties of concrete
59. 2021