Multi-objective optimization of mix proportions for mass concrete with enhanced resistance to cracking and reduced temperature rise
Source abstract
Abstract
The objective of this study is to investigate the influence of fly ash (FA), granulated blast furnace slag (GBFS), and a high-efficiency crack-resistant agent (HECRA) on the workability, mechanical properties, hydration heat (HH), adiabatic temperature rise (ATR), and volume stability of mass concrete (MC). Preliminary experiments determined that the total replacement of FA and GBFS in dual blending should be within 35% to 40%, with the GBFS content not exceeding 15%. A total of 16 concrete mix designs (MD) were formulated, including a control mix (comprising only cement (C)) and ternary blends (comprising C, FA, and GBFS), with the HECRA added at 0%, 4%, and 8% of the mass of cementitious materials. The workability of the MC was assessed through tests for air content (AC), bulk density (BD), slump, flow, and setting time. The mechanical strength, HH, ATR, and shrinkage rate of the MC were individually evaluated through compressive strength (CS) tests, HH experiments, ATR tests, and shrinkage measurements. A grey relational evaluation model was employed to establish correlations between C, FA, GBFS, and the HECRA concerning overall performance. Supported by the entropy value method, a comprehensive performance evaluation model was created. The results indicate that, compared to the control mix, the other groups exhibited reductions in mechanical performance, rates of HH, cumulative ATR, and increased self-volume deformation (SVD). These findings suggest that including FA, GBFS, and a HECRA can mitigate the HH and SVD of MC, albeit at the expense of its strength. According to the comprehensive performance evaluation model, when the C-to-FA-to-GBFS ratio is 6:3:1, and the HECRA constitutes 8% of the mass of cementitious materials, the specimens demonstrate the best overall performance. At 28d, the CS is 48.46 MPa, satisfying the design strength requirements for C35 concrete. The comprehensive performance of the large volume crack-resistant concrete with low temperature rise (LCCT) produced in this study meets engineering needs. It provides theoretical references for the mixed design of MC.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Mechanical strength model of engineered cementitious composites with freeze–thaw damage based on pore structure evolution10.1016/j.cemconcomp.2022.104706 ↗
2. Prestressed compressive strength model of engineered cementitious composite subjected to freeze–thaw damage in cryogenic freezing state10.1016/j.conbuildmat.2023.132013 ↗
3. Gray model study of strength and pore structure of Recycled Concrete Powder (RCP) concrete based on low-field NMR technology10.3390/ma16176058 ↗
4. On-site measurement of heat of hydration of delivered mass concrete10.1016/j.conbuildmat.2020.121246 ↗
5. Technological advances and trends in modern high-rise buildings10.3390/buildings9090193 ↗
6. Effect of different fineness of cement on the autogenous shrinkage of mass concrete under variable temperature conditions10.3390/ma16062367 ↗
7. Temperature variation in concrete samples due to cement hydration10.1016/j.applthermaleng.2016.05.048 ↗
8. Influence of temperature rising inhibitor on temperature and stress field of mass concrete
9. Insight into thermal stress distribution and required reinforcement reducing early-age cracking in mass foundation slabs
10. Determining the water to cement ratio of fresh concrete by evaporation10.1016/j.conbuildmat.2019.117972 ↗
11. Hydration, mechanical property and C-S-H structure of early-strength low-heat cement-based materials10.1016/j.matlet.2018.01.077 ↗
12. Experimental and finite element investigations on the temperature field of a massive bridge pier caused by the hydration heat of concrete10.1016/j.conbuildmat.2018.10.128 ↗
13. Optimization of temperature control and cooling measures for high altitude and strong volume concrete
14. Effect of calcium sulfoaluminate and MgO expansive agent on the mechanical strength and crack resistance of concrete10.1016/j.conbuildmat.2021.123833 ↗
15. Mechanisms of hydration heat inhibitors on the early heat release process of cement10.3389/fmats.2022.1049202 ↗
16. Investigation of temperature development and cracking control strategies of mass concrete: a field monitoring case study
17. Lv · 2012
18. Effect of polypropylene and glass fiber on properties of lightweight concrete exposed to high temperature
19. Investigation on the mechanical properties and strengthening mechanism of solid-waste-sulfur-based cementitious composites
20. Effect of modified nano‐titanium and fly ash on ultra‐high‐performance concrete properties10.1002/suco.202300053 ↗
21. Properties of sustainable high-strength concrete containing large quantities of industrial wastes, nanosilica and recycled aggregates10.1016/j.jmrt.2023.05.050 ↗
22. Properties and durability of self‐compacting concrete incorporated with nanosilica, fly ash, and limestone powder10.1002/suco.202300121 ↗
23. Potential of decarbonized coal gasification residues as the mineral admixture of cement-based material10.1016/j.conbuildmat.2020.121259 ↗
24. Effect of using mineral admixtures and ceramic wastes as coarse aggregates on properties of ultrahigh-performance concrete10.1016/j.jclepro.2020.123073 ↗
25. The role of various powders during the hydration process of cement-based materials10.1155/2017/8394834 ↗
26. Study on the macroscopic properties of phosphorus slag composite cementitious materials based on hydration perspective
27. Kinetics of pozzolanic reaction and carbonation in ceramic–lime system: Thermogravimetry and solid-state NMR spectroscopy study
28. Effect of agricultural olive, rice husk and sugarcane leaf waste ashes on sustainable ultra-high-performance concrete
29. Effect of using sugarcane leaf ash and granite dust as partial replacements for cement on characteristics of ultra-high performance concrete
30. Effect of utilizing peanut husk ash on the properties of ultra-high strength concrete10.1016/j.conbuildmat.2023.131398 ↗
31. Engineering properties of ultra-high strength concrete containing sugarcane bagasse and corn stalk ashes10.1016/j.jmrt.2023.01.197 ↗
32. Using a combination of industrial and agricultural wastes to manufacture sustainable ultra-high-performance concrete
33. Effects of nano sized sesame stalk and rice straw ashes on high-strength concrete properties10.1016/j.jclepro.2022.133542 ↗
34. Effect of rice straw ash and palm leaf ash on the properties of ultrahigh-performance concrete
35. Effect of ferrosilicon and silica fume on mechanical, durability, and microstructure characteristics of ultra high-performance concrete10.1016/j.conbuildmat.2021.126233 ↗
36. Ultra-high-performance concrete properties containing rice straw ash and nano eggshell powder
37. Modification of ultrafine blast furnace slag with steel slag as a novel high-quality mineral admixture to prepare high-strength concrete
38. Cement industry of China: driving force, environment impact and sustainable development10.1016/j.rser.2016.11.033 ↗
39. Solid waste management in China: policy and driving factors in 2004–201910.1016/j.resconrec.2021.105727 ↗
40. Supplementary cementitious materials: new sources, characterization, and performance insights10.1016/j.cemconres.2019.05.008 ↗
41. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
42. Reactivity of supplementary cementitious materials (SCMs) in cement blends10.1016/j.cemconres.2019.105799 ↗
43. Effect of elevated temperatures on geopolymer paste, mortar and concrete10.1016/j.cemconres.2009.10.017 ↗
44. Hydration of Portland cement with high replacement by siliceous fly ash10.1016/j.cemconres.2012.06.009 ↗
45. Impact of temperature rising inhibitor on hydration of cement-fly ash cementitious materials and performance of concrete
46. Setting controlling of lithium slag-based geopolymer by activator and sodium tetraborate as a retarder and its effects on mortar properties10.1016/j.cemconcomp.2020.103598 ↗
47. The development of compressive strength of ground granulated blast furnace slag-palm oil fuel ash-fly ash based geopolymer mortar10.1016/j.matdes.2013.11.080 ↗
48. The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature10.1016/j.matdes.2014.05.001 ↗
49. Early-age hydration and mechanical properties of high volume slag and fly ash concrete at different curing temperatures10.1016/j.conbuildmat.2017.05.080 ↗
50. Water-repellent additive that increases concrete cracking resistance in dry curing environments10.1016/j.conbuildmat.2020.118704 ↗
51. Anti-cracking concrete properties based on the synergistic expansion effect of internal curing agents
52. Influence of reactivity and dosage of MgO expansive agent on shrinkage and crack resistance of face slab concrete10.1016/j.cemconcomp.2021.104333 ↗
53. A starch-based admixture for reduction of hydration heat in cement composites10.1016/j.conbuildmat.2018.03.199 ↗
54. Impact of temperature rising inhibitor on hydration kinetics of cement paste and its mechanism10.1016/j.cemconcomp.2018.07.018 ↗
55. Effect of a novel starch-based temperature rise inhibitor on cement hydration and microstructure development10.1016/j.cemconres.2019.105961 ↗
56. Research and development of self-waterproofing concrete for tunnel lining structure and its impermeability and crack resistance characteristics
57. The effect of hybrid fibers and expansive agent on the shrinkage and permeability of high-performance concrete10.1016/S0008-8846(00)00479-8 ↗
58. Simplified chemo-mechanical model of hydration/expansion of calcium-oxide-type expansive agent in cement-based materials10.1680/jmacr.18.00450 ↗
59. Influences of calcium oxide-magnesium oxide blended expansive agent and temperature rising inhibitor on hydration characteristic of early-age cement paste
60. Investigation on expansion effect of the expansive agents in ultra-high performance concrete10.1016/j.cemconcomp.2019.103425 ↗
61. Effects of combined expansive agents and supplementary cementitious materials on the mechanical properties, shrinkage and chloride penetration of self-compacting concrete10.1016/j.conbuildmat.2019.03.143 ↗
62. Effects of calcination condition on expansion property of MgO-type expansive agent used in cement-based materials10.1016/j.cemconres.2009.09.025 ↗
63. The characteristics of air void and frost resistance of RCC with fly ash and expansive agent10.1016/j.conbuildmat.2005.01.039 ↗
64. Effect of chloride ingress on self-healing recovery of smart cementitious composite incorporating crystalline admixture and MgO expansive agent10.1016/j.cemconres.2020.106252 ↗
65. Recent advance of MgO expansive agent in cement and concrete
66. Morphologies and performances of hydration products of expansive agents
67. Effect of CaO and MgO based expansive agent on deformation and mechanical properties of concrete-filled steel tubes10.1016/j.conbuildmat.2020.118723 ↗
68. Effect of solid waste ceramic on uniaxial tensile properties and thin plate bending properties of polyvinyl alcohol engineered cementitious composite10.1016/j.jclepro.2020.122329 ↗
69. Decision-making of irrigation scheme for soybeans in the Huaibei plain based on grey entropy weight and grey relation–projection pursuit10.3390/e21090877 ↗
70. Effects of CO addition and multi-factors optimization on hydrogen/air combustion characteristics and thermal performance based on grey relational analysis10.1016/j.energy.2022.124573 ↗
71. The grey relational approach for evaluating measurement uncertainty with poor information10.1088/0957-0233/26/12/125002 ↗
72. Safety risk assessment of a Pb-Zn mine based on fuzzy-grey correlation analysis10.3390/electronics9010130 ↗
73. Risk assessment and implementation of deformation disaster for operation tunnel based on entropy weight-grey relational analysis10.1080/19475705.2022.2100833 ↗
74. Application of extreme gradient boosting based on grey relation analysis for prediction of compressive strength of concrete
75. Multi-response optimization of ultrafine cement-based slurry using the taguchi-grey relational analysis method10.3390/ma14010117 ↗
76. Durability evaluation and life prediction of fiber concrete with fly ash based on entropy weight method and grey theory10.1016/j.conbuildmat.2022.126918 ↗
77. A multi-criteria decision-making approach to vulnerability assessment of rural flooding in Khyber Pakhtunkhwa Province, Pakistan10.1007/s11356-023-25609-1 ↗
78. Characterizing groundwater quality ranks for drinking purposes in Sylhet district, Bangladesh, using entropy method, spatial autocorrelation index, and geostatistics10.1007/s11356-017-0254-1 ↗
79. Distribution characteristics of an airflow–dust mixture and quantitative analysis of the dust absorption effect during tunnel sub-regional coal cutting10.1016/j.psep.2022.05.068 ↗
80. Rockburst estimation model based on IEWM-SCM and its application10.1007/s12665-023-10764-y ↗
81. GB/T 1596-2017. China · 2014
82. GB/T 18046-2017. China · 2018
83. Effect of temperature rising inhibitor on expansion behavior of cement paste containing expansive agent10.1016/j.conbuildmat.2018.12.034 ↗
84. T/CBMF 19-2017. (CECS) · 2020
85. GB/T 14684-2022. China · 2022
86. GB/T 14685-2022. China · 2022
87. Shrinkage crack inhibiting of cast in situ tunnel concrete by double regulation on temperature and deformation of concrete at early age10.1016/j.conbuildmat.2019.117834 ↗
88. Research on the crack control of pavement concrete and its application in Taihu tunnel
89. Research on application of anti-cracking agent in main structure concrete of Jinji Lake Tunnel
90. Research on anti-crack performance for concrete of artificial island tunnel of Hong Kong-Zhuhai-Macao bridge
91. Preparation and application of open-cut cast in situ tunnel concrete under water with low temperature rise and high crack-resistance
92. GB 50496-2018. (MOHURD) · 2018
93. JGJ 55-2011. (MOHURD) · 2011
94. GB/T 17671-2021. China · 2021
95. GB/T 50080-2016. (MOHURD) · 2016
96. SL/T 3522020. China, Test code for hydraulic concrete, China Electric Power Press, Beijing, 2020SL/T 352–2020.
97. GB/T 50082-2009. (MOHURD) · 2009
98. GB 50010–2010. (MOHURD), Code for Design of Concrete Structures, China Architecture & Building Press, Beijing, 2110.
99. GB/T 50081-2019. (MOHURD) · 2019 · 157
100. Soutsos · 2018