Preparation, microstructure, performance and mortar application of paraffin/titanium-bearing blast furnace slag phase change aggregate
Source abstract
Abstract
The application of phase change materials (PCM) in building energy saving is limited by the cost and performance of PCM carriers. Using solid waste as a PCM carrier can reduce costs and environmental impacts. In this study, lightweight and porous titanium-bearing blast furnace slag (Ti-BFS) was innovatively used as PCM carrier to prepare paraffin/Ti-BFS phase change aggregate (PTA) by vacuum impregnation, and then PTA was used to develop thermal energy storage cement mortar by replacing sand. The microstructure and performance of aggregate and mortar were also investigated. The results indicated that PTA has a paraffin loading rate of 21.9%, latent heat of 65.7 J/g for melting and 65.0 J/g for freezing, and good chemical compatibility. The microstructure reveals that PTA has good compatibility with cement matrix. Compared with ordinary cement mortar, a reduction percentage of 28-day compressive strength, dry density and thermal conductivity at 100% PTA substitution rate are respectively 39.8%, 29.1% and 52.5%. However, a significant capacity to weaken temperature fluctuation was observed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Adsorption and Cooling Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Review of thermal energy storage technologies based on PCM application in buildings10.1016/j.enbuild.2013.08.006 ↗
2. Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency10.1016/j.enbuild.2012.12.042 ↗
3. Potential of macroencapsulated PCM for thermal energy storage in buildings: A comprehensive review10.1016/j.conbuildmat.2019.07.221 ↗
4. A review on phase change material (PCM) for sustainable passive cooling in building envelopes10.1016/j.rser.2016.03.036 ↗
5. Systematic review of encapsulation and shape-stabilization of phase change materials10.1016/j.est.2020.101495 ↗
6. Paraffin/diatomite composite phase change material incorporated cement-based composite for thermal energy storage10.1016/j.apenergy.2013.01.005 ↗
7. Multiphysics analysis of effects of encapsulated phase change materials (PCMs) in cement mortars10.1016/j.cemconres.2019.02.002 ↗
8. Integrating phase change materials in construction materials: Critical review10.1016/j.conbuildmat.2019.05.064 ↗
9. Development of structural-functional integrated energy storage concrete with innovative macro-encapsulated PCM by hollow steel ball10.1016/j.apenergy.2016.10.072 ↗
10. Multiphysics study on cement-based composites incorporating green biobased shape-stabilized phase change materials for thermal energy storage10.1016/j.jclepro.2022.133826 ↗
11. Development of structural–functional integrated concrete with macro-encapsulated PCM for thermal energy storage10.1016/j.apenergy.2015.03.137 ↗
12. Paraffin/expanded vermiculite composite phase change material as aggregate for developing lightweight thermal energy storage cement-based composites10.1016/j.apenergy.2015.09.069 ↗
13. A novel paraffin/expanded perlite composite phase change material for prevention of PCM leakage in cementitious composites10.1016/j.apenergy.2015.08.019 ↗
14. Preparation of paraffin/porous TiO2 foams with enhanced thermal conductivity as PCM, by covering the TiO2 surface with a carbon layer10.1016/j.apenergy.2016.03.010 ↗
15. Preparation of polyethylene–paraffin compound as a form-stable solid-liquid phase change material10.1016/S0927-0248(00)00041-6 ↗
16. Experimental steady-state and transient thermal performance of materials for thermal energy storage in building applications: From powder SS-PCMs to SS-PCM-based acrylic plaster10.1016/j.energy.2022.123768 ↗
17. Developments in phase change material (PCM) doped energy efficient polyurethane (PU) foam for perishable food cold-storage applications: A review10.1016/j.est.2022.104620 ↗
18. Preparation, characterization, thermal energy storage properties and temperature control performance of form-stabilized sepiolite based composite phase change materials10.1016/j.enbuild.2019.02.008 ↗
19. Development of calcium silicate-coated expanded clay based form-stable phase change materials for enhancing thermal and mechanical properties of cement-based composite10.1016/j.solener.2018.08.085 ↗
20. Thermal energy storage cement mortar containing n-octadecane/expanded graphite composite phase change material10.1016/j.renene.2012.08.024 ↗
21. Study on properties of phase change foam concrete block mixed with paraffin/fumed silica composite phase change material10.1016/j.renene.2019.10.073 ↗
22. Experimental investigation on improvement of latent heat and thermal conductivity of shape-stable phase-change materials using modified fly ash10.1016/j.jclepro.2019.118952 ↗
23. Development of novel form-stable phase change material (PCM) composite using recycled expanded glass for thermal energy storage in cementitious composite10.1016/j.renene.2021.04.123 ↗
24. Development of form-stable composite phase change material by incorporation of dodecyl alcohol into ground granulated blast furnace slag10.1016/j.enbuild.2013.03.026 ↗
25. Development of composite PCMs by incorporation of paraffin into various building materials10.3390/ma8020499 ↗
26. Utilizing blast furnace slags (BFS) to prepare high-temperature composite phase change materials (C-PCMs10.1016/j.conbuildmat.2018.05.110 ↗
27. Cement based-thermal energy storage mortar including blast furnace slag/capric acid shape-stabilized phase change material: Physical, mechanical, thermal properties and solar thermoregulation performance10.1016/j.enbuild.2022.111849 ↗
28. Development, mechanical properties and numerical simulation of macro encapsulated thermal energy storage concrete10.1016/j.enbuild.2015.03.014 ↗
29. Thermal performance and corrosion resistance of structural-functional concrete made with inorganic PCM10.1016/j.conbuildmat.2020.118768 ↗
30. Performance of novel thermal energy storage engineered cementitious composites incorporating a paraffin/diatomite composite phase change material10.1016/j.apenergy.2014.02.007 ↗
31. JGJ/T 220-2011. Decorative Mortar Technical Regulations.
32. Preparation of composite shape-stabilized phase change materials for highway pavements10.1016/j.conbuildmat.2012.12.027 ↗
33. Study on the performance of phase change aggregate mortar based on micro- and nano-scale cement-based porous materials
34. JGJ/T 70-2009. Construction Mortar Basic Performance Test Method Standards.
35. Development of thermal energy storage lightweight structural cementitious composites by means of macro-encapsulated PCM10.1016/j.conbuildmat.2019.07.136 ↗
36. Granular phase changing composites for thermal energy storage10.1016/j.solener.2004.04.022 ↗
37. A novel polynary fatty acid/sludge ceramsite composite phase change materials and its applications in building energy conservation10.1016/j.renene.2014.11.001 ↗
38. Utilization of waste glass powder for latent heat storage application in buildings10.1016/j.enbuild.2013.07.056 ↗
39. Experimental research on an environment-friendly form-stable phase change material incorporating modified rice husk ash for thermal energy storage10.1016/j.est.2020.101599 ↗
40. Paraffin/red mud phase change energy storage composite incorporated gypsum-based and cement-based materials: Microstructures, thermal and mechanical properties10.1016/j.jhazmat.2018.10.061 ↗
41. Preparation of low-temperature composite phase change materials (C-PCMs) from modified blast furnace slag (MBFS)10.1016/j.conbuildmat.2019.117717 ↗
42. Preparation, characterization and thermal properties of dodecanol/cement as novel form-stable composite phase change material10.1016/j.enbuild.2013.07.083 ↗
43. Properties of cementitious mortar and concrete containing micro-encapsulated phase change materials10.1016/j.conbuildmat.2016.05.116 ↗
44. Experimental study of carbon fiber reinforced alkali-activated slag composites with micro-encapsulated PCM for energy storage10.1016/j.conbuildmat.2017.11.075 ↗
45. Use of calcium silicate-coated paraffin/expanded perlite materials to improve the thermal performance of cement mortar10.1016/j.conbuildmat.2018.08.213 ↗
46. Compressive strength and hygric properties of concretes incorporating microencapsulated phase change material10.1016/j.conbuildmat.2019.06.156 ↗
47. Understanding the compressive strength degradation mechanism of cement-paste incorporating phase change material10.1016/j.cemconcomp.2021.104249 ↗