journal article·2024-12Open access

Utilization of municipal solid waste incineration fly ash in ecological concrete and pavement bricks: Mechanical properties and environmental impact

Shan Gao, Hongyan Chu, Wenfang Shi, Fengjuan Wang, Jinyang Jiang

Abstract

This study examines the feasibility of incorporating municipal solid waste incineration fly ash (MSWIFA) into the production of ecological concrete (EC) and ecological concrete pavement bricks. As a byproduct of urban waste incineration, MSWIFA contains hazardous pollutants such as dioxins and heavy metals, prompting the necessity for effective disposal methods to mitigate environmental impacts. The research investigates how varying levels of MSWIFA affect the properties of EC and evaluates the microstructural, economic, and ecological advantages of utilizing MSWIFA in EC production. Furthermore, the study evaluates the environmental risks associated with MSWIFA and the resultant concrete bricks. Key findings indicate that a 10 % substitution rate of MSWIFA enhances EC's flexural strength, compressive strength, ultrasonic pulse velocity, and elastic modulus, attributed to the elevated calcium and chloride ion concentrations that boost cement hydration and mechanical properties. Conversely, higher MSWIFA substitution results in reduced flexural and compressive strength and a decline in porosity due to increased chloride ion migration. Energy consumption, carbon emissions, and production costs consistently decrease with elevated MSWIFA substitution rates. Ecological concrete pavement bricks with a 20 % MSWIFA substitution ratio show enhanced flexural and compressive strengths compared to standard concrete bricks, along with superior performance post-freeze-thaw cycles. The environmental risk posed by MSWIFA is deemed low, and the heavy metal risk index in the ecological bricks is well below the low-risk threshold, suggesting negligible environmental risks. Overall, the findings advocate for the resource-efficient application of MSWIFA in manufacturing sustainable concrete materials with manageable environmental risk. • Resource utilization of MSWIFA in ecological concrete and pavement brick was studied. • Properties of ecological concrete were deteriorated via MSWIFA. • Environmental friendliness of ecological concrete was improved via MSWIFA. • Cc40 concrete pavement brick was prepared by MSWIFA. • Health risk of concrete pavement brick with MSWIFA can be negligible.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (84)

Show source-provided references
1. A multi-objective optimisation approach for activity excitation of waste glass mortar10.1016/j.jmrt.2022.01.066 ↗
2. Study on preparation of glass-ceramics from multiple solid waste and coupling mechanism of heavy metals10.1016/j.ceramint.2022.08.173 ↗
3. The performance of micropore-foamed geopolymers produced from industrial wastes10.1016/j.conbuildmat.2021.124636 ↗
4. Status and perspectives of municipal solid waste incineration in China: a comparison with developed regions10.1016/j.wasman.2017.04.014 ↗
5. Monitoring of groundwater in the area of a reclaimed municipal waste landfill10.12911/22998993/111718 ↗
6. Municipal solid waste composting: Application as a tomato fertilizer and its effect on crop yield, fruit quality and phenolic content10.1017/S1742170516000296 ↗
7. Use of incineration MSW ash: a review10.3390/su2071943 ↗
8. Co-disposal of MSWIFA and Bayer Red Mud Using A One-part Geopolymer System10.1016/j.jhazmat.2016.06.042 ↗
9. PCDD/Fs and heavy metals in the vicinity of landfill used for MSWIFA disposal: pollutant distribution and environmental impact assessment10.1016/j.envpol.2022.120083 ↗
10. Benefits of pre-treating MSWI fly ash before alkali-activation
11. A sustainable technology for Pb and Zn stabilization based on the use of only waste materials: a green chemistry approach to avoid chemicals and promote CO2 sequestration10.1016/j.cej.2014.04.080 ↗
12. The resource utilization and environmental assessment of MSWIFA with solidification and stabilization: a review10.1007/s12649-023-02275-5 ↗
13. Resource utilization of municipal solid waste incineration fly ash-cement and alkali-activated cementitious materials: A review10.1016/j.scitotenv.2022.158254 ↗
14. Lead-chlorine synergistic immobilization mechanism in municipal solid waste incineration fly ash based magnesium potassium phosphate cement10.1016/j.jhazmat.2022.130038 ↗
15. Applicability of municipal solid waste incineration ash on base layers of pavements10.1061/(ASCE)MT.1943-5533.0000903 ↗
16. Zero-waste approach in municipal solid waste incineration: reuse of bottom ash to stabilize fly ash10.1016/j.jclepro.2019.118779 ↗
17. The use of fly ashes from waste-to-energy processes as mineral CO2 sequesters and supplementary cementitious materials
18. Advanced progress in recycling municipal and construction solid wastes for manufacturing sustainable construction materials
19. Sustainable stabilization/solidification of municipal solid waste incinerator fly ash by incorporation of green materials10.1016/j.jclepro.2019.03.057 ↗
20. Stabilisation/solidification of municipal solid waste incineration fly ash by phosphate-enhanced calcium aluminate cement10.1016/j.jhazmat.2020.124404 ↗
21. Solidification of municipal solid waste incineration fly ash with alkali-activated technology10.1016/j.jenvman.2023.119404 ↗
22. Utilization of municipal solid waste incineration fly ash for sulfoaluminate cement clinker production10.1016/j.wasman.2011.04.022 ↗
23. Properties of solid waste incinerator fly ash10.1061/(ASCE)0733-9410(1989)115:8(1118) ↗
24. Environmental perspectives of recycling various combustion ashes in cement production–a review10.1016/j.wasman.2018.06.012 ↗
25. Municipal solid waste (MSW) co-processing in cement kiln to relieve China’s Msw treatment capacity pressure10.1016/j.resconrec.2020.105384 ↗
26. Use of municipal solid waste incineration ash in 3D printable concrete10.1016/j.psep.2020.06.018 ↗
27. Reuse of municipal solid wastes incineration fly ashes in concrete mixtures10.1016/S0956-053X(02)00085-5 ↗
28. Green concrete: prospects and challenges10.1016/j.conbuildmat.2017.09.008 ↗
29. The preparation of pavement brick and the research on compression resistance
30. Utilization of municipal solid waste incineration ash in Portland cement clinker10.1007/s10098-011-0367-z ↗
31. Geopolymer bricks prepared by MSWI fly ash and other solid wastes: Moulding pressure and curing method optimization10.1016/j.chemosphere.2022.135987 ↗
32. Temporal and spatial characteristics and health risk assessments of heavy metal pollution in soils of Shenfu irrigation area
33. Environmental and human health risk evaluation of heavy metals in ceramsites from municipal solid waste incineration fly ash10.1007/s10653-020-00639-7 ↗
34. GB /T 50080-2016 · 2016
35. GB/T 50081-2019 · 2020
36. CEC 02-2020 · 2020
37. Feasibility of producing eco-friendly self-compacting mortar with municipal solid waste incineration bottom ash: a preliminary study
38. GB/T 50082-2009 · 2009
39. NT Build 492, Concrete, mortar and cement-based repair materials: chloride migration coefficient from non-steady-state migration experiments; (1999).
40. HJ/T300-2007 · 2009
41. Utilisation of municipal solid waste incinerator (MSWI) fly ash with metakaolin for preparation of alkali-activated cementitious material10.1016/j.jhazmat.2020.123451 ↗
42. Effects of a washing pre-treatment of municipal solid waste incineration fly ash on the hydration behavior and properties of ash—Portland cement mixtures10.1680/adcr.2004.16.2.45 ↗
43. Potential utilization of municipal solid waste incineration ashes as sand replacement for developing sustainable cementitious binder10.1016/j.conbuildmat.2021.125488 ↗
44. Utilization of municipal solid waste incineration fly ash with red mud-carbide slag for eco-friendly geopolymer preparation10.1016/j.jclepro.2022.130820 ↗
45. Mechanisms of chloride and sulfate removal from municipal-solid-waste-incineration fly ash (MSWIFA): Effect of acid-base solutions10.1016/j.wasman.2019.09.033 ↗
46. An environment-friendly pretreatment process of municipal solid waste incineration fly ash to enhance the immobilization efficiency by alkali-activated slag cement10.1016/j.jclepro.2020.125728 ↗
47. Utilisation of municipal solid waste incinerator (MSWI) fly ash with metakaolin for preparation of alkali-activated cementitious material10.1016/j.jhazmat.2020.123451 ↗
48. Effect of casting methods and SCMs on properties of mortars prepared with fine MSW incineration bottom ash10.1016/j.conbuildmat.2018.02.077 ↗
49. Mechanical and vegetative performance of ecological concrete with nutrient aggregates
50. Study on the performance optimization of plant-growing ecological concrete10.3390/su16114575 ↗
51. Characterization of a lightweight concrete with sunflower aggregates10.1016/j.promfg.2018.03.024 ↗
52. Effect of pelletized coconut fibre on the compressive strength of foamed concrete10.1051/matecconf/20164701013 ↗
53. Investigation of the engineering properties of environmentally-friendly self-compacting lightweight mortar containing olive kernel shells as aggregate10.1016/j.jclepro.2019.119406 ↗
54. Performance evaluation of concrete with Arabic gum biopolymer
55. The early age non-destructive testing of concrete made with recycled concrete aggregate10.1016/j.conbuildmat.2012.07.058 ↗
56. Properties of concrete prepared with low-grade recycled aggregates10.1016/j.conbuildmat.2012.06.060 ↗
57. Mechanical characterization of fiber-reinforced rubberized recycled concrete10.1016/j.conbuildmat.2023.134799 ↗
58. Application of fly ash and slag generated by incineration of municipal solid waste in concrete
59. Sustainable use of municipal solid waste incinerator bottom ash and the treated industrial wastewater in self-compacting concrete10.1016/j.conbuildmat.2021.123814 ↗
60. Hydraulic activity of municipal solid waste incinerator fly-ash-slag-blended eco-cement10.1016/S0008-8846(00)00423-3 ↗
61. Molecular dynamics simulation study on interfacial shear strength between calcium-silicate-hydrate and polymer fibers10.1016/j.conbuildmat.2020.119557 ↗
62. Characteristics of non-steady-state chloride migration of self-compacting concrete containing recycled concrete aggregate made of fly ash and silica fume
63. Quantitative evaluation of interfacial transition zone of sustainable concrete with recycled and steel slag as aggregate10.1002/suco.202000135 ↗
64. Pore characteristics of recycled aggregate concrete and its relationship with durability under complex environmental factors10.1016/j.conbuildmat.2020.121642 ↗
65. Chloride diffusion coefficient of recycled aggregate concrete under compressive loading10.1617/s11527-016-0820-x ↗
66. Permeability and pore structure of OPC paste10.1016/S0008-8846(00)00474-9 ↗
67. Nano/micro-structures and mechanical properties of ultra-high performance concrete incorporating graphene with different lateral sizes10.1016/j.compositesa.2020.106011 ↗
68. Fractal characteristics of geopolymer mortar containing municipal solid waste incineration fly ash and its correlations to pore structure and strength10.3390/fractalfract6110676 ↗
69. Intermediate-calcium based cementitious materials prepared by MSWIFA and other solid wastes: hydration characteristics and heavy metals solidification behavior10.1016/j.jhazmat.2017.12.072 ↗
70. Performance optimization design of high ductility cement-based alkali-activated municipal solid waste incineration fly ash composite for rapid repair material10.1016/j.conbuildmat.2023.133301 ↗
71. Evaluation of the ability of cement prepared with incineration fly ash to solidify heavy metals at high temperatures
72. GB 16889-2008 · 2009
73. Evaluation of physical stability and leachability of Portland Pozzolona Cement (PPC) solidified chemical sludge generated from textile wastewater treatment plants
74. Stabilization of lead in an alkali-activated municipal solid waste incineration fly ash–Pyrophyllite-based system10.1016/j.jenvman.2017.07.002 ↗
75. Effects of different supplementary cementitious materials on the performance and environment of eco-friendly mortar prepared from waste incineration bottom ash10.1016/j.conbuildmat.2022.129277 ↗
76. Mechanical and self-healing behavior of low carbon engineered cementitious composites reinforced with PP-fibers10.1016/j.conbuildmat.2020.119805 ↗
77. An agile, intelligent and scalable framework for mix design optimization of green concrete incorporating recycled aggregates from precast rejects
78. K. Symons, Book review: Embodied carbon: The inventory of carbon and energy (ICE). A BSRIA Guide, 2011.10.1680/ener.2011.164.4.206 ↗
79. Development of recycled strain-hardening cement-based composite (SHCC) for sustainable infrastructures10.1016/j.compositesb.2011.11.060 ↗
80. GB/T 28635-2012, Concrete pavement bricks[S]. Beijing, China, 2012. (In Chinese).
81. Migration characteristics and toxicity evaluation of heavy metals during the preparation of lightweight aggregate from sewage sludge
82. Cleaner production of the precast concrete industry: comparative life cycle analysis of concrete using recycled aggregates from crushed precast rejects10.1080/19648189.2023.2240882 ↗
83. Calculation of heavy metals’ toxicity coefficient in the evaluation of potential ecological risk index
84. Aquatic contamination and ecological risk. An attempt to a conceptual framework10.1016/0043-1354(84)90225-2 ↗