journal article·2023-12Open access

Investigating the cracking performance of asphalt mixture containing RAP using different cracking indices

Peyman Sadeghi, Ahmad Goli

Abstract

Due to environmental benefits and economic issues, the use of reclaimed asphalt pavement (RAP) in asphalt mixtures has become a necessity. However, mixtures containing RAP have poor performance against cracking at different temperatures due to excessive stiffness and aged binder. Therefore, evaluating the cracking performance of RAP is of great importance. In this research, the semicircular bending (SCB) test was used to evaluate fracture characteristics. For this purpose, the indicators of peak load (Pmax), fracture energy until failure (FEUF), fracture energy after failure (FEAF), fracture strain tolerance (FST), and power (P) are used. The SCB test was performed at 25 °C and -12 °C, and all indicators were calculated at intermediate and low temperatures. Three different percentages of RAP (0%, 50%, and 100%) were used. Also, three different rejuvenators, Waste Engine Oil (WEO), Oleic Acid (OA), and Vacuum Bottom (VB), were used with four different doses. Then recycled high-density polyethylene (r-HDPE) in four different amounts (0%, 3%, 5%, and 7%) was used separately and in combination with rejuvenators to prepare the samples. Also, to expand the application of SCB tests worldwide, and due to the availability and simplicity of the Marshall device, non-standard samples with a diameter of 100 mm made by this device were used. Experimental results showed that the use of a rejuvenator alone, as well as in combination with the recycled polymer, could improve the cracking resistance of asphalt mixtures at medium and low temperatures. Results showed that VB performed best at 25 °C and OA at -12 °C. An increase of 53% was seen in the FST index for the VB rejuvenator and 62% in the OA rejuvenator. Also, VB (at 25 °C) and OA (at -12 °C) improved crack propagation resistance by 62% and 94%, respectively. To evaluate the results, statistical analyzes were used. The statistical results showed that using the Marshall compaction device to make the samples has a suitable accuracy. In addition, the statistical results showed that the fracture behavior of mixtures containing RAP at a temperature of 25 °C differs from a temperature of -12 °C.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Evaluation on the use of COVID-19 single-use face masks to improve the properties of hot mix asphalt10.1080/14680629.2022.2072376 ↗
2. Performance evaluation of asphalt mixtures containing warm mix asphalt (WMA) additives and reclaimed asphalt pavement (RAP)10.1016/j.conbuildmat.2020.121200 ↗
3. Investigating the effect of using steel slag on abrasion resistance of roller-compacted concrete pavement10.1007/s41062-022-00885-x ↗
4. Research on drying shrinkage deformation and cracking risk of pavement concrete internally cured by SAPs10.1016/j.conbuildmat.2019.116705 ↗
5. Crack resistance of hot mix asphalt containing different percentages of reclaimed asphalt pavement and glass fiber10.1016/j.conbuildmat.2019.117015 ↗
6. Geotechnical and geoenvironmental properties of recycled construction and demolition materials in pavement subbase applications10.1061/(ASCE)MT.1943-5533.0000652 ↗
7. Reclaimed asphalt pavement and recycled concrete aggregate blends in pavement subbases: laboratory and field evaluation10.1061/(ASCE)MT.1943-5533.0000850 ↗
8. Utilisation of construction and demolition materials with clay for road pavement subgrade10.1080/14680629.2017.1407817 ↗
9. The study of the feasibility of using recycled steel slag aggregate in hot mix asphalt
10. Effect of wetting–drying cycles on compressive strength and microstructure of recycled asphalt pavement – Fly ash geopolymer10.1016/j.conbuildmat.2017.03.243 ↗
11. Mechanical characterization of warm mix asphalt mixtures made with RAP and Para-fiber additive10.1016/j.conbuildmat.2021.122456 ↗
12. The effects of Gilsonite and Sasobit on the mechanical properties and durability of asphalt mixtures10.1016/j.conbuildmat.2019.117676 ↗
13. The study of the effect of internal structure on permeability of porous asphalt10.1080/14680629.2017.1283355 ↗
14. Chemical composition and rheological characteristics of binders containing RAP and rejuvenator10.1061/(ASCE)MT.1943-5533.0003016 ↗
15. Emergy evaluation of cropping, poultry rearing, and fish raising systems in the drawdown zone of Three Gorges Reservoir of China10.1016/j.jclepro.2016.12.053 ↗
16. Relations between colloidal indices and low-temperature properties of reclaimed binder modified with softer binder, oil-rejuvenator and polybutadiene rubber10.1016/j.conbuildmat.2019.117800 ↗
17. Thermal and cold flow properties of bio-derived rejuvenators and their impact on the properties of rejuvenated asphalt binders10.1016/j.tca.2018.11.011 ↗
18. Chemical characterization of recycling agents10.1061/(ASCE)MT.1943-5533.0003167 ↗
19. Fracture characterization of stone matrix asphalt mixtures incorporating reclaimed asphalt pavement and rejuvenator10.1061/(ASCE)MT.1943-5533.0003945 ↗
20. Properties of reclaimed asphalt pavement mixture with organic rejuvenator10.1016/j.conbuildmat.2020.121514 ↗
21. Molecular dynamics evaluation of activation mechanism of rejuvenator in reclaimed asphalt pavement (RAP) binder10.1016/j.conbuildmat.2021.123898 ↗
22. Microstructural characterisation of reclaimed asphalt pavement with rejuvenators10.1080/10298436.2020.1788027 ↗
23. Laboratory study on the use of reclaimed asphalt pavement and copper slag in warm mix asphalt pavements using waste engine oil as a rejuvenator10.1007/s42947-021-00036-y ↗
24. Mechanical performance evaluation of crumb rubber enriched rejuvenator modified RAP mixtures10.1016/j.conbuildmat.2022.127951 ↗
25. Effect of waste engine oil and waste cooking oil on performance improvement of aged asphalt10.3390/app9091767 ↗
26. Effect of vegetable oil on the properties of asphalt binder modified with high density polyethylene10.3390/polym15030749 ↗
27. Influence of warm-mix asphalt technology and rejuvenator on performance of asphalt mixtures containing 50% reclaimed asphalt pavement10.1016/j.jclepro.2018.04.269 ↗
28. Identification of asphalt aging characterization by spectrophotometry technique10.1016/j.fuel.2018.04.030 ↗
29. Cracking performance characterisation of asphalt mixtures containing reclaimed asphalt pavement with hybrid binder10.1080/14680629.2017.1393002 ↗
30. Evaluation of fracture and fatigue cracking characterization ability of nonstandardized semicircular-bending test for asphalt concrete10.1061/(ASCE)MT.1943-5533.0003292 ↗
31. Effect of bio-oils on binder and mix properties with high RAP binder content10.1061/(ASCE)MT.1943-5533.0003057 ↗
32. Assessment of cracking performance indices of asphalt mixtures at intermediate temperatures10.1080/10298436.2020.1730838 ↗
33. Fracture properties of asphalt mixtures using semi-circular bending test: a state-of-the-art review and future research10.1016/j.conbuildmat.2015.12.046 ↗
34. Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures10.1016/j.conbuildmat.2013.12.097 ↗
35. Crack resistance investigation of mixtures with reclaimed SBS modified asphalt pavement using the SCB and DSCT tests10.1016/j.conbuildmat.2020.120365 ↗
36. Effects of specimen size and loading conditions on the fracture behaviour of asphalt concretes in the SCB test
37. Evaluation of fracture behavior of modified Warm Mix Asphalt (WMA) under modes I and II at low and intermediate temperatures10.1016/j.tafmec.2021.103015 ↗
38. Development of a balanced cracking index for asphalt mixtures tested in semi-circular bending with load-LLD measurements10.1016/j.measurement.2020.108658 ↗
39. "3515: Standard specification hot-mixed, hot laid bituminous paving mixtures
40. Viscoelastic properties of recycled asphalt binder containing waste engine oil10.1016/j.jclepro.2018.01.237 ↗
41. The potential of waste cooking oil as bio-asphalt for alternative binder –An overview
42. Effects of rejuvenators on high-RAP mixtures based on laboratory tests of asphalt concrete (AC) mixtures and fine aggregate matrix (FAM) mixtures10.1016/j.conbuildmat.2017.06.101 ↗
43. Repurposing waste plastics into cleaner asphalt pavement materials: a critical literature review10.1016/j.jclepro.2020.124355 ↗
44. Evaluation of rheological behaviors and anti-aging properties of recycled asphalts using low-viscosity asphalt and polymers10.1016/j.jclepro.2020.120048 ↗
45. Standard method of test for resistance to plastic flow of bituminous mixtures using Marshall apparatus
46. Low temperature performance of HMA using vacuum tower distillation bottoms modified with bio-derived rejuvenators according to the SCB test10.1080/10298436.2020.1739284 ↗
47. Using semi circular bending test to evaluate low temperature fracture resistance for asphalt concrete10.1007/s11340-009-9303-0 ↗
48. Comprehensive evaluation of low-temperature fracture indices for asphalt mixtures10.1080/14680629.2017.1389085 ↗
49. Development of an index to evaluate the cracking potential of asphalt mixtures using the semi-circular bending test10.1016/j.conbuildmat.2018.02.014 ↗
50. Development of a rate-dependent cumulative work and instantaneous power-based asphalt cracking performance index10.1080/14680629.2019.1586753 ↗
51. Experimental and numerical investigations of non-standardised semi-circular bending test for asphalt concrete mixtures10.1080/10298436.2019.1654608 ↗
52. Evaluating the performance of hot mix asphalt with reclaimed asphalt pavement and heavy vacuum slops as rejuvenator
53. Implementing waste oils with reclaimed asphalt pavement
54. Investigation of waste oils as rejuvenators of aged bitumen for sustainable pavement10.1016/j.conbuildmat.2019.05.180 ↗
55. H. Ziari, S. Bananezhad, A. Bananezhad, and M.A. Ziari, "Immediate and Long-Term Characteristics of Recycling Agents in the Restoration of Chemical Properties of Aged Asphalt Binder," Journal of Materials in Civil Engineering, vol. 34, no. 12, p. 04022318, 2022.10.1061/(ASCE)MT.1943-5533.0004483 ↗
56. A review on bitumen aging and rejuvenation chemistry: processes, materials and analyses10.3390/su13126523 ↗
57. The relationship between colloidal chemistry and ageing properties of bitumen10.1080/10916466.2011.613429 ↗
58. Fracture properties of reclaimed asphalt pavement mixtures with rejuvenator10.1016/j.conbuildmat.2020.119679 ↗
59. Microscopic experimental and numerical research on rejuvenators: a review
60. Analytical investigation of the impact of a novel bio-based recycling agent on the colloidal stability of aged bitumen10.1080/14680629.2017.1304257 ↗
61. Identification of parameter to assess cracking resistance of asphalt mixtures subjected to aging and moisture conditioning
62. Bootstrapping analysis, inferential statistics and EXCEL
63. Sleep habits among medical students and correlation between sleep quality and academic performance10.1093/eurpub/cky214.141 ↗
64. Development of a performance-volumetric relationship for asphalt mixtures10.1177/0361198119845364 ↗