journal article·2022-06Open access

Early-age hydration and strength formation mechanism of composite concrete using molybdenum tailings

Tao Luo, Yu Yi, Fang Liu, Qiang Sun, Xiaofeng Pan, Cheng Hua

Abstract

With the aim of reducing the land occupation and environmental pollution caused by accumulation of molybdenum tailings, and to promote the use of molybdenum tailings as building materials, molybdenum tailings, fly ash, and cement were used as composite cementitious materials to prepare concrete. The effect of molybdenum tailings replacement on the working performance of fresh concrete, as well as early-age mechanical properties and the hydration reaction of the concrete at different ages were studied. The results show that with higher replacement amounts of molybdenum tailings, slump, and air content of fresh concrete both increase first and then decrease; when the age is less than 3 d, the molybdenum tailings increase the compressive strength of concrete. After 7 d, with higher replacement ratios of molybdenum tailings, the compressive strength of concrete gradually decreases. Higher amounts of molybdenum tailings also cause the internal water content of concrete to gradually increase during 28 d hydration reaction; and with greater curing age, the internal water content of concrete gradually decreases. The compressive strength of concrete increases faster in the curing stage when the internal water consumption rate of the concrete is faster. In the later hydration reaction of the molybdenum tailings composite cementitious system, which mainly produces C-S-H gels and ettringite (AFt) intertwined with other hydration products, the fine grains that are not involved in the reaction fill the pores of the system, which promotes the compressive strength of the concrete.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Molybdenum resources: their depletion and safeguarding for future generations10.1016/j.resconrec.2018.03.002 ↗
2. Long term carbon sequestration potential of biosolids-amended copper and molybdenum mine tailings following mine site reclamation10.1016/j.ecoleng.2018.04.001 ↗
3. Experimental research on recycling phlogopite from molybdenum tailings10.4028/www.scientific.net/AMR.1010-1012.1609 ↗
4. The study on the flotation of tailings of molybdenum minerals for the reclamation of iron10.1016/j.proenv.2012.01.303 ↗
5. Kropschot · 2010
6. Mine wastes: past, present, future10.2113/gselements.7.6.375 ↗
7. Mill tailings based composites as paste backfill in mines of U-bearing dolomitic limestone ore10.1016/j.jrmge.2017.08.004 ↗
8. Combined effects of antimony and sodium diethyldithiocarbamate on soil microbial activity and speciation change of heavy metals. Implications for contaminated lands hazardous material pollution in nonferrous metal mining areas10.1016/j.jhazmat.2018.01.044 ↗
9. Development of sustainable construction material using industrial and agricultural solid waste: a review of waste-create bricks10.1016/j.conbuildmat.2011.04.038 ↗
10. The legacy of surface mining: remediation, restoration, reclamation and rehabilitation10.1016/j.envsci.2016.07.011 ↗
11. The alkaline leaching of molybdenite flotation tailings associated with galena10.1016/j.hydromet.2012.07.017 ↗
12. Test research on the effects of mechanochemically activated iron tailings on the compressive strength of concrete10.1016/j.conbuildmat.2016.05.020 ↗
13. Red clay brick and tungsten mining waste-based alkali-activated binder: microstructural and mechanical properties10.1016/j.conbuildmat.2018.09.153 ↗
14. Reusing gold-mine tailings in cement mortars: mechanical properties and socio-economic developments for the Lefke-Xeros area of Cyprus10.1016/j.jclepro.2019.117871 ↗
15. Synthesis of geopolymers from alkaline activation of gold mining wastes
16. Utilization of iron ore tailings as fine aggregate in ultra-high performance concrete10.1016/j.conbuildmat.2013.10.019 ↗
17. Preparation and characterization of CaO-Al2O3-SiO2 glass-ceramics from molybdenum tailings10.1016/j.matchemphys.2017.05.028 ↗
18. Assessment of molybdenum mine tailings as filler in cement mortar
19. Cementitious composites containing alum sludge ash: an investigation of microstructural features by an advanced nanoindentation technology10.1016/j.conbuildmat.2021.124286 ↗
20. Effect of alum sludge ash on the high-temperature resistance of mortar10.1016/j.resconrec.2021.105958 ↗
21. Utilization of molybdenum tailings in concrete manufacturing: a review10.3390/app10010138 ↗
22. Preparation and characterization of molybdenum tailings-based water storage material10.1016/j.matchemphys.2019.121791 ↗
23. Preparation of glass-ceramics using molybdenum tailings
24. Packing effect and pozzolanic reaction of fly ash in mortar10.1016/j.cemconres.2004.09.030 ↗
25. Deepwater natural gas hydrate innovation opportunities10.1007/978-3-319-43385-1_6 ↗
26. Hydration mechanism of low quality fly ash in cement-based materials10.1007/s11771-014-2436-z ↗
27. Study of the hydration of Portland cement blended with blast-furnace slag by calorimetry and thermogravimetry10.1007/s10973-010-0841-6 ↗
28. Drying effect on cement paste porosity at early age observed by NMR methods10.1016/j.conbuildmat.2011.07.012 ↗
29. Micropore size analysis in hydrated cement paste by NMR10.1016/S0730-725X(01)00276-4 ↗
30. Comparative study of low-field NMR relaxtion measurements and two traditional methods in the determination of water holding capacity of pork10.1016/S0309-1740(00)00080-2 ↗
31. Probing the microstructure and water phases in composite cement blends10.1016/j.cemconres.2006.10.007 ↗
32. Study on preparation and hydration mechanism of composite cementitious materials using molybdenum tailings
33. Behavior and mechanism of pozzolanic reaction heat of fly ash and ground granulated blastfurnace slag at early age
34. Fly ash effects: I. The morphological effect of fly ash10.1016/S0008-8846(03)00217-5 ↗
35. Hydration of ternary cementitious system: Portland cement, fly ash and silica fume10.1007/s10973-014-4182-8 ↗