The effect of slag and fly ash content on the properties of electric furnace nickel slag-based geopolymer used for repair materials
Source abstract
Abstract
Large quantities of electric furnace nickel slag (EFNS) are annually generated through the smelting of ferronickel in industries. EFNS contains a large amount of glass phase SiO2 and MgO, with certain volcanic ash activity. Nevertheless, the lower early activity of EFNS due to the ultra-low Ca and Al greatly limits its application. To descend the consumption of raw materials and mitigate environmental pollution, utilizing such wastes as a binding agent in the domain of repairing mortars is a suitable solution. To address the lack of Ca and Al and adjust the ratios of Ca/Al and Si/Al in EFNS-based mortars, the purpose of the research was to incorporate different contents of slag (SL) and fly ash (FA) from 25% to 40%, respectively, into EFNS-based mortars activated with Na2SiO3. The study involved an investigation of the workability, mechanical properties, bond strength, and dry shrinkage of the mortars, employing different percentages of SL and FA. At the same time, TGA, XRD, MIP, and SEM were applied to investigate the chemical composition and microstructure of the binder gel phase. The results show that when the SL content reached 40% and the FA content was 30%, the repair performance of mortar is much better than numerous repair materials, with an excellent compressive strength (94.0 MPa), flexural strength (11.0 MPa), and bond strength (6.33 MPa). As such, increasing the SL and FA contents seemed to have a positive influence on dry shrinkage and mechanical strengths. Additionally, when the FA content was 30%, the incorporation of SL was found to promote EFNS hydrolysis, and the hydration could directly generate hydrotalcite, which is beneficial to decreasing drying shrinkage at 28 d. The present study provides a theoretical foundation for the application of EFNS-based geopolymers in repair materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Value added utilization of by-product electric furnace ferronickel slag as construction materials: a review10.1016/j.resconrec.2018.02.034 ↗
2. Evaluation of alkali-activated blast furnace ferronickel slag as a cementitious material: reaction mechanism, engineering properties and leaching behaviors10.1016/j.conbuildmat.2018.08.182 ↗
3. Evaluation of alkali activated blast furnace ferronickel slag as a cementitious material: reaction mechanism, engineering properties and leaching behaviors10.1016/j.conbuildmat.2018.08.182 ↗
4. Constraints and opportunities for the recycling of growing ferronickel slag in China10.1016/j.resconrec.2018.08.002 ↗
5. Utilization of nickel slag using selective reduction followed by magnetic separation10.1016/S1003-6326(13)62883-6 ↗
6. The fundamental research to extract iron from the nickel slag by smelting reduction process
7. Soundness and compressive strength of Portland cement blended with ground granulated ferronickel slag10.1016/j.conbuildmat.2017.02.023 ↗
8. Important laterite nickel ore resources in the world: present situation and exploitation
9. Fresh properties, compressive strength and microstructure of fly ash geopolymer paste blended with iron ore tailing under thermal cycle10.1016/j.conbuildmat.2016.05.059 ↗
10. Conversion of local industrial wastes into greener cement through geopolymer technology: a case study of high-magnesium nickel slag10.1016/j.jclepro.2016.09.147 ↗
11. Freeze-thaw cycle test and damage mechanics models of alkali-activated slag concrete10.1016/j.conbuildmat.2010.12.006 ↗
12. Effect of high temperatures on the properties of alkali activated aluminosilicate with electrical porcelain filler10.1007/s10765-007-0311-y ↗
13. Properties and durability of alkali-activated slag pastes immersed in sea water10.1016/j.ceramint.2012.01.024 ↗
14. Jun · 2018
15. Activating of nickel slag and preparing of cementitious materials for backfilling10.4028/www.scientific.net/AMR.936.1624 ↗
16. Conversion of local industrial wastes into greener cement through geopolymer technology: a case study of high-magnesium nickel slag10.1016/j.jclepro.2016.09.147 ↗
17. Laterite nickel ore smelting ferronickel waste residue is environmentally safe
18. Full-depth concrete pavement repair with steel reinforcements10.1016/j.conbuildmat.2013.10.086 ↗
19. Sorptivity and acid resistance of ambient-cured geopolymer mortars containing nano-silica10.1016/j.cemconcomp.2016.06.017 ↗
20. A method for assessing bond performance of cement-based repair materials10.1016/j.conbuildmat.2014.06.048 ↗
21. AH3 phase in the hydration product system of AFt-AFm-AH 3 in calcium sulfoaluminate cements: a microstructural study10.1016/j.conbuildmat.2018.02.052 ↗
22. In vitro and in vivo research advancements on the magnesium phosphate cement biomaterials: a review10.1016/j.mtla.2020.100852 ↗
23. Influence of polymer latex on the setting time, mechanical properties and durability of calcium sulfoaluminate cement mortar10.1016/j.conbuildmat.2018.03.005 ↗
24. Mix proportion of high-strength, roller-compacted, latex-modified rapid-set concrete for rapid road repair10.1016/j.conbuildmat.2010.11.085 ↗
25. Evaluation of high-early strength activated slag cement
26. The scope for better industry representation in long-term energy models: modeling the cement industry10.1016/j.apenergy.2019.01.252 ↗
27. Geopolymer prepared with high-magnesium nickel lag: characterization of properties and microstructure10.1016/j.conbuildmat.2014.01.038 ↗
28. Uptake of chloride and carbonate by Mg-Al and Ca-Al layered double hydroxides in simulated pore solutions of alkali-activated slag cement10.1016/j.cemconres.2017.05.015 ↗
29. Study on the slow setting of alkali-excited ultrafine slag powder for grout preparation
30. Bond performance of repair mortar made with magnesium phosphate cement and ferro aluminate cement10.1016/j.conbuildmat.2021.122398 ↗
31. Bond behavior and interfacial micro-characteristics of magnesium phosphate cement onto old concrete substrate10.1016/j.conbuildmat.2018.02.018 ↗
32. Study on setting time of fly ash geological polymer
33. The effect of ionic contaminants on the early-age properties of alkali-activated fly ash-based cements10.1016/S0008-8846(01)00724-4 ↗
34. Fly ash effects: I. The morphological effect of fly ash10.1016/S0008-8846(03)00217-5 ↗
35. Toward an indexing approach toevaluate fly ashes for geopolymer manufacture10.1016/j.cemconres.2016.04.007 ↗
36. Rong · 2017
37. Properties of alkali-activated ground granulated blast furnace slag blended with ferronickel slag
38. M.G. Girish, K.K. Shetty, G. Nayak, Synthesis of fly-ash and slag based geopolymer concrete for rigid pavement, Mater. Today Proc.
39. The role of calcium in blended fly ash geopolymers10.1007/s10853-014-8307-z ↗
40. Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes10.1016/j.jhazmat.2008.12.121 ↗
41. Efflorescence control in geopolymer binders based on natural pozzolan10.1016/j.cemconcomp.2011.07.007 ↗
42. Strength and dry shrinkage of reactive MgO modified alkali-activated slag paste10.1016/j.conbuildmat.2013.10.081 ↗
43. MgO expansive cement and concrete in China: past, present and future10.1016/j.cemconres.2013.12.007 ↗
44. Preparation and characterization of nickel slag/metakaolin base polymer
45. Mechanical properties, drying and utogenous shrinkage of blast furnace slag activated with hydrated lime an gypsum10.1016/j.cemconcomp.2010.01.004 ↗
46. Drying and autogenous shrinkage of pastes and mortars with activated slag cement10.1016/j.cemconres.2007.11.002 ↗
47. Durability of tubular geopolymer reinforced with silica sand10.4236/njgc.2012.22012 ↗
48. Effect of spherical silica fume and fly ash on the rheological property, fluidity, setting time, compressive strength, water resistance and drying shrinkage of magnesium ammonium phosphate cement
49. A parameter study on the age at cracking of bonded concrete overlays subjected to restrained shrinkage
50. Effect of fine aggregate replacement with Class F fly ash on the mechanical properties of concrete10.1016/S0008-8846(02)01000-1 ↗
51. High strength concrete as a by-product of design for low permeability
52. Song · 2018
53. Uptake of chloride and carbonate by Mg-Al and Ca-Al layered double hydroxides in simulated pore solutions of alkali-activated slag cement10.1016/j.cemconres.2017.05.015 ↗
54. Geopolymerization reaction, microstructure and simulation of metakaolin-based geopolymers at extended Si/Al ratios10.1016/j.cemconcomp.2017.01.014 ↗
55. Strength and hydration properties of reactive MgO-activated ground granulated blastfurnace slag paste10.1016/j.cemconcomp.2014.10.007 ↗
56. F. Jin, A. Abdollahzadeh, A. Al-Tabbaa, Effect of different MgO on the hydration of MgO-activated granulated ground blast furnace slag paste, in: Proceedings of the 3rd International Conference on Sustainable Construction Materials and Technologies, Kyoto, Japan, 2013.
57. Development of low pH cement systems forming magnesium silicate hydrate (M-S-H)10.1016/j.cemconres.2011.01.016 ↗
58. Magnesia modification of alkali-activated slag fly ash cement [J]10.1007/s11595-011-0182-8 ↗
59. Study by thermogravimetry of the evolution of ettringite phase during type II Portland cement hydration10.1023/A:1019950126184 ↗
60. Quantification of hydration phases in supersulfated cements: review and new approaches10.1680/adcr.2011.23.6.265 ↗
61. Thermal behavior of the hydrotalcite-like layered structure of Mg and Al-layered double hydroxides with interlayer carbonate by means of in situ powder HTXRD and DTA/TG10.1016/S0167-2738(97)00494-3 ↗
62. Zhang · 2016
63. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
64. Shiyuan · 1998
65. Effect of pore size distribution on dry shrinking of alkali-activated slag concrete10.1016/S0008-8846(00)00327-6 ↗
66. Shrinkage characteristics of alkali-activated fly ash/slag paste and mortar at early ages10.1016/j.cemconcomp.2014.07.007 ↗
67. Geopolymer prepared with high-magnesium nickel slag: characterization of properties and microstructure10.1016/j.conbuildmat.2014.01.038 ↗
68. Yi · 2018
69. Factors influencing bonding strength of geopolymer-aggregate interfacial transition zone