Effect of early strength agent on the hydration of geopolymer mortar at low temperatures
Source abstract
Abstract
In order to study the hydration law of geopolymer mortar in low temperature environment and explore the early strength agent suitable for geopolymer mortar in low temperature environment, this paper studied the development of compressive strength, flexural strength and hydration temperature of slag silica fume based geopolymer mortar at 10 ℃ when lithium carbonate, triethanolamine and triisopropylamine (TIPA) were added respectively. The hydration reaction process and micro mechanism of slag silica fume based geopolymer mortar with early strength agent at low temperature were analyzed by SEM and FTIR. The results show that lithium carbonate, triethanolamine and TIPA can enhance the early mechanical properties of slag silica fume based geopolymer mortar, and the strengthening effect is related to the content of early strength agent. The optimum contents of triethanolamine, TIPA and lithium carbonate are 0.06%, 0.04% and 0.4% respectively, and triethanolamine has the best reinforcing effect. Adding early strength agent can promote the secondary hydration of geopolymer mortar and accelerate the formation of hydration products. The early strength agent can improve the microstructure of slag silica fume based geopolymer mortar and make the mortar more dense and stronger.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Mechanical characteristics of asphalt pavement pothole maintenance
2. Analysis on the status quo of research and application of municipal road repair materials
3. Research on application technology of rapid repair of expressway concrete surface defects
4. Analysis of damage causes of cement concrete pavement and selection of repair materials
5. Influence of low temperature on dynamic behavior of concrete10.1016/j.conbuildmat.2016.04.046 ↗
6. Prediction of antifreeze critical strength of infant age concrete10.1007/s11595-006-2272-6 ↗
7. J.W. Sun, Z. Wang, Z.H. Chen, Hydration mechanism of composite binders containing blast furnace ferronickel slag at different curing temperatures Springe Neth., 131, 2018, p. 3.10.1007/s10973-017-6739-9 ↗
8. The influence of ambient pH on fly ash-based geopolymer10.1016/j.cemconcomp.2016.06.010 ↗
9. Resistance of alkali-activated binders to organic acid attack: Assessment of evaluation criteria and damage mechanisms10.1016/j.conbuildmat.2017.06.117 ↗
10. Geopolymers and geopolymeric materials10.1007/BF01904446 ↗
11. The effect of ionic contaminants on the early-age properties of alkali-activated fly ash-based cements10.1016/S0008-8846(01)00724-4 ↗
12. Study on basic properties of slag fly ash based geopolymer concrete
13. Research progress of geopolymers
14. High temperature resistance of fiber-reinforced fly ash-steel slag based geopolymer
15. Effect of different Calcium resources on reaction mechanism of geopolymer
16. Durability evaluation of geopolymer and conventional concretes10.1016/j.conbuildmat.2017.01.056 ↗
17. Influence of fly ash on the water and chloride permeability of alkali-activated slag mortars and concretes
18. Study on preparation of grouting material by ultra-fine slag powder excited by sodium silicate
19. Composition design and properties of polymer repair materials for fly ash base
20. Chemical stability of cementitious materials based on metakaolin10.1016/S0008-8846(99)00074-5 ↗
21. Properties and reaction mechanism of slag based polymer dry powder
22. Application of eco-friendly alternative activators in alkali-activated materials: a review
23. Circular economy and durability in geopolymers ceramics pieces obtained from glass polishing waste
24. A.G. Azevedo, M.T. Marvila, M. Alic. Effect of the addition and processing of glass polishing waste on the durability of geopolymeric mortars. 2021, 2214–5095.10.1016/j.cscm.2021.e00662 ↗
25. Rheological and the fresh state properties of alkali-activatedmortars by blast furnace slag10.3390/ma14082069 ↗
26. Study on ultra early strength and micro expansion underwater grouting material
27. Effects of several admixture components on the properties of sulphoaluminate cement
28. Xiao,L.; Yuan, B.X. Effect of fly ash and early strength agent on durability of concrete exposed to the cyclic sulfate environment. Journal of Wuhan University of Technology Materials Science Edition. 2010.10.1007/s11595-010-0151-7 ↗
29. Effect of triethanolamine on initial structure and mechanical properties of cement
30. Research on application technology of concrete early strength agent
31. Experimental study on selection of early-strength agent for low-strength cementitious materials prepared with manganese tailings10.1007/s12665-018-7415-5 ↗
32. Heat‐cured concrete: improving the early strength and pore structure by activating aluminosilicate internal curing agent with TIPA
33. Effect of TIPA on compressive strength and hydration of cement-fly ash paste10.1016/j.conbuildmat.2018.05.117 ↗
34. Effect of TIPA on hydration and hardening of slag cement
35. GB / T 203–2008, granulated blast furnace slag used in cement.
36. GB / T 27690–2011, silica fume for mortar and concrete.
37. JGJ/T 98–2010, Code for Mix Proportion Design of Masonry Mortar.
38. Effect of lithium carbonate on hydration and properties of sulphoaluminate cement at low temperature