Increasing strength and performance properties of bimetallic rods during severe plastic deformation
Source abstract
Abstract
This study describes the evolution of the microstructure and mechanical properties of bimetallic aluminum-copper rods during straining by Equal channel angular pressing-drawing (ECAP-drawing). The study was conducted by means of a transmission electron microscope, EBSD analysis, tensile tests and determination of microhardness. The paper shows that an ultrafine-grained copper-aluminum composite with a gradient structure is formed during straining by ECAP-drawing. Microhardness of copper shell during 4 cycles of straining by ECAP-drawing increased from 57 to 165, and hardness of aluminum rod increased from 25 to 75 HV. This is associated with grain refinement and hardening of their boundaries by increasing the density of dislocations. Tensile test diagrams analysis has shown that straining leads to an increase in strength properties of bimetallic wire by 2 times, and as a result the plastic properties are also reduced by almost 2 times, but remain at a level applicable for further use. Application of such bimetallic rods in construction will allow reducing specific quantity of metal per structures without reduction of strength properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. The effect of metal and polypropylene fiber on technological and physical mechanical properties of activated cement compositions
2. External reinforcement of concrete beams using fiber reinforced plastics
3. Analysis of FRP strengthened reinforced concrete beams using energy variation method
4. Experimental study of the mechanical properties of a new duplex stainless steel exposed to elevated temperatures
5. Processes of structure formation and paste matrix hydration with multilayer carbon nanotubes additives
6. N.C. Thang, 2013. Ultra high performance concrete using a combination of Silicafume and Ground Granulated Blast-furnace Slag in Vietnam. The International Conference on Sustainable Built Environment for Now and the Future 2013, 303–309.
7. Experimental study on dynamic load magnification factor for ballastless track-subgrade of high-speed railway10.1016/j.jrmge.2013.04.004 ↗
8. Changes in microstructure and properties of austenitic steel AISI 316 during high-pressure torsion
9. Development of a thermomechanical treatment mode for stainless-steel rings10.3390/ma15144930 ↗
10. Structure and mechanical properties of aluminum alloy 2024 after cryogenic cooling during ECAP
11. Influence of combined process rolling-pressing on microstructure and mechanical properties of copper10.1016/j.proeng.2014.10.180 ↗
12. Change in copper microstructure and mechanical properties with deformation in an equal channel stepped die10.1007/s11041-015-9870-x ↗
13. New combined process pressing-drawing and impact on properties of deformable aluminum wire10.1016/j.proeng.2014.10.181 ↗
14. Hardening of bimetallic wires from secondary materials used in the construction of power lines10.3390/ma15113975 ↗
15. Evolution of the microstructure and mechanical properties of copper under ECAP with intense cooling10.1007/s11041-020-00544-x ↗
16. Forming ultrafine-grain structure in steel wire by continuous deformation10.3103/S0967091210060203 ↗
17. Fabrication of aluminum/copper clad composite using hot hydro static extrusion process and its material characteristics10.1016/j.msea.2004.05.051 ↗
18. FEM simulation of copper busbar pressing on the continuous extrusion line "Conform"10.4028/www.scientific.net/SSP.284.547 ↗
19. Theoretical analysis of bimetallic rods extrusion process in double reduction die
20. Doom-roof steel tanks under external explosion: dynamic responses and anti-explosion measures10.1016/j.jcsr.2021.107118 ↗
21. Microstructural evolution and micro/meso-deformation behavior in pure copper processed by equal-channel angular pressing10.1016/j.msea.2016.03.016 ↗
22. The development and testing of a new method of qualitative analysis of the microstructure quality, for example of steel AISI 321 subjected to radial shear rolling
23. New combined process pressing-drawing and impact on properties of deformable aluminum wire10.1016/j.proeng.2014.10.181 ↗
24. Forming ultrafine-grain structure in steel wire by continuous deformation10.3103/S0967091210060203 ↗
25. Electrical, corrosion, and mechanical properties of aluminum-copper joints produced by explosive welding10.1007/s11665-012-0203-6 ↗
26. Features of change of the structure and mechanical properties of steel at ECAP depending on the initial state
27. Evolution of the microstructure and mechanical properties of copper during the pressing–drawing process10.1134/S0031918X18090132 ↗
28. Change in the microstructure and properties of steel-aluminum wire during “ECA-pressing - drawing”
29. Humphreys · 2004
30. Fiber texture formation and mechanical properties in drawn fine copper wire10.4028/www.scientific.net/MSF.157-162.715 ↗
31. On the texture of aluminum rods extruded under various conditions10.2464/jilm.18.81 ↗
32. Strain-path effects on the evolution of micro-structure and texture during the severe-plastic deformation of aluminum10.1007/BF02586120 ↗
33. Strengthening during heat treatment of HPT processed copper and nickel10.1016/j.msea.2018.11.010 ↗
34. Efficiency of activation of mineral binders in vortex-layer devices
35. Structure and mechanical proper-ties of steel in the process "pressing-drawing10.1007/s11665-019-3880-6 ↗
36. Technological perspective for use the natural pineapple fiber in mortar to repair structures10.1007/s12649-021-01374-5 ↗
37. Acoustic properties of innovative concretes: a review10.3390/ma14020398 ↗
38. Impact performance of steel fiber-reinforced self compacting concrete against repeated drop weight impact10.3390/cryst11020091 ↗
39. Rice husk ash‐based concrete composites: a critical review of their properties and applications10.3390/cryst11020168 ↗
40. High-strength fibrous concrete of Russian Far East natural materials
41. Self-compacting concrete using pretreatmented rice husk ash
42. Fine-grained concrete of composite binder
43. Mechanical properties of fiber-reinforced concrete using composite binders10.1155/2017/2316347 ↗