journal article·2024-07Open access

Potential usage of fly ash and nano silica in high-strength concrete: Laboratory experiment and application in rigid pavement

Huu-Bang Tran, Vu To-Anh Phan

Abstract

High-strength concrete (HSC) using supplementary cementitious material of 30% fly ash (FA) and various nano silica (NS) contents were investigated in this study. FA and NS are waste materials collected from local thermal plants and rice husk ash in Southern Vietnam, respectively. Different concentrations of NS at 0%, 0.5%, 1.0%, and 1.5% were incorporated into the base mixture in place of cement and FA. The water-to-binder ratio of 0.32 was constant for all the mixtures. Results indicated that the combination binder of cement, FA, and NS satisfied the setting time as pure cement binder. The slump test value was in the range of 30-40 mm by adjusting the superplasticzer. Mechanical properties of HSC were studied at various curing ages of 3, 7, 28, and 56 days, including compressive strength, flexural strength, elastic modulus, and abrasion resistance. Results indicated that 1% NS can be considered as optimum content for preparing an HSC mixture, which showed the best mechanical properties. Furthermore, a good correlation between compressive strength and flexural strength was obtained from the results. Finally, rigid pavement calculation revealed that the addition of 1% NS resulted in a reduction in the thickness of the concrete slab by 30 mm (around 10.7%) compared to non-NS concrete. These findings suggest that incorporating nano-silica into concrete can lead to thinner concrete slabs with improved performance characteristics.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Mehta · 2014
2. Mechanical behaviour of high strength concrete modified with triple blend of fly ash, silica fume and steel fibers
3. Enhancing the strength properties of high-performance concrete using ternary blended cement: OPC, nano-silica, bagasse ash
4. Compressive strength development and durability properties of high volume slag and slag-fly ash blended concretes containing nano-CaCO310.1016/j.jmrt.2021.01.001 ↗
5. Substantial global carbon uptake by cement carbonation10.1038/ngeo2840 ↗
6. Alternative clinker technologies for reducing carbon emissions in cement industry: a critical review10.3390/ma15010209 ↗
7. The influences of granite industry waste on concrete properties with different strength grades
8. Durability studies of nano-engineered fly ash concrete10.1016/j.conbuildmat.2018.11.022 ↗
9. Synergistic effects of nano-silica and fly ash on properties of cement-based composites10.1016/j.conbuildmat.2020.120737 ↗
10. Edwin E. Berry, R.T.H.M.-H.Z.B.J.C. and M.G. Dean, Hydration in High-Volume Fly Ash Concrete Binders. ACI Materials Journal. 91(4).
11. Ultra high-performance concrete utilizing fly ash as cement replacement under autoclaving technique
12. Enhancing the reactivity of normal and fly ash concrete using colloidal nano-silica
13. Compressive strength and durability properties of high volume fly ash (HVFA) concretes containing ultrafine fly ash (UFFA)10.1016/j.conbuildmat.2015.02.068 ↗
14. Hydration and physical characteristics of ultrahigh-volume fly ash-cement systems with low water/binder ratio10.1016/j.conbuildmat.2017.11.104 ↗
15. Effect of class F fly ash on the durability properties of concrete10.1016/j.serj.2017.09.001 ↗
16. Nano- and micro-scale characterisation of interfacial transition zone (ITZ) of high volume slag and slag-fly ash blended concretes containing nano SiO2 and nano CaCO310.1016/j.conbuildmat.2020.121311 ↗
17. Influences of high-volume coal bottom ash as cement and fine aggregate replacements on strength and heat evolution of eco-friendly high-strength concrete
18. Mechanical performance and optimization of high-volume fly ash concrete containing plastic wastes and graphene nanoplatelets using response surface methodology10.1016/j.conbuildmat.2021.125085 ↗
19. Compressive behavior and durability performance of high-volume fly-ash concrete with plastic waste and graphene nanoplatelets by using response-surface methodology10.1061/(ASCE)MT.1943-5533.0004377 ↗
20. A study on the effect of nano silica on compressive strength of high volume fly ash mortars and concretes10.1016/j.matdes.2014.04.025 ↗
21. Modification of cement-based materials with nanoparticles10.1016/j.cemconcomp.2012.06.012 ↗
22. Microstructure and strength development of quaternary blend high-volume fly ash concrete10.1007/s10853-020-04473-1 ↗
23. Durability properties of high volume fly ash concrete containing nano-silica10.1617/s11527-014-0329-0 ↗
24. Effect of nano-CaCO3 on hydration of cement containing supplementary cementitious materials10.1680/adcr.9.00016 ↗
25. Mechanical properties of high strength concrete containing nano SiO2 made from rice husk ash in Southern Vietnam10.3390/cryst11080932 ↗
26. Effect of nano silica particles on impact resistance and durability of concrete containing coal fly ash10.3390/nano11051296 ↗
27. Influence of nano-SiO2 on properties of fresh and hardened high performance concrete: a state-of-the-art review10.1016/j.conbuildmat.2017.05.059 ↗
28. Effect of different storage methods on thermal and mechanical properties of mortar containing aerogel, fly ash and nano-silica10.1016/j.conbuildmat.2018.12.052 ↗
29. Beneficial role of nanosilica in cement based materials – a review10.1016/j.conbuildmat.2013.05.052 ↗
30. Fresh and rheological behavior of nano-silica and fly ash blended self-compacting concrete10.1016/j.conbuildmat.2015.07.142 ↗
31. Preparation and flexural fatigue resistance of self-compacting road concrete incorporating nano-silica particles10.1016/j.conbuildmat.2021.122380 ↗
32. Effect of nano silica, silica fume and steel slag on concrete properties
33. Chloride permeability and chloride binding capacity of nano-modified concrete
34. Effects of nano titanium and nano silica on high-strength concrete properties incorporating heavyweight aggregate
35. Effect of nano silica on compressive strength and microstructures of high volume blast furnace slag and high volume blast furnace slag-fly ash blended pastes
36. Research on manufacturing high strength concrete using additives combining nano SIO2 and fly ash in the Southern region,
37. ASTM-C33, in Standard Specification for Concrete Aggregates. 2018, American Society for Testing and Materials, United Sates.
38. ASTM-C618, in Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. 2019: 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428–2959, United States.
39. ACI-211, in Guide for Selecting Proportions for High-Strength Concrete Using Portland Cement and Other Cementitious Materials. 2022, American Concrete Institute.
40. Optimization of fly ash content in concrete: Part I: non-air-entrained concrete made without superplasticizer10.1016/S0008-8846(03)00004-8 ↗
41. Malhotra, V.M., High-Performance High-Volume Fly Ash Concrete. Concrete International. 24(7).
42. Performance of high volume fly ash concrete incorporating additives: a systematic literature review10.1016/j.conbuildmat.2020.120606 ↗
43. Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume10.1016/j.conbuildmat.2005.09.001 ↗
44. Influence of different types of nano-SiO2 particles on properties of high-performance concrete10.1016/j.conbuildmat.2016.03.041 ↗
45. Effects of nano-silica and nano-limestone on flowability and mechanical properties of ultra-high-performance concrete matrix10.1016/j.conbuildmat.2015.05.137 ↗
46. ASTM C143 2020, in Standard Test Method for Slump of Hydraulic-Cement Concrete. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428–2959, United States.
47. ISO 9597-2008, in Cement - Test methods - Determination of setting time and soundness.
48. ASTM C39, in Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens. 2021: 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428–2959, United States.
49. ASTM C78, in Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading). 2009: 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428–2959, United States.
50. ASTM C469, in Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression. 1994: 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428–2959, United States.
51. TCVN-3114:1993, Heavy weight concrete - Method for determination of abrasion. Vietnam.
52. TCCS-40:2022, Specitications for Construction and Acceptance of Portland Cement Concrete Pavement for Highway. Ministry of Transport, Vietnam.
53. Properties of concrete incorporating nano-silica10.1016/j.conbuildmat.2012.06.044 ↗
54. The effect of Colloidal Nano-silica on workability, mechanical and durability properties of high performance concrete with copper slag as partial fine aggregate10.1016/j.conbuildmat.2016.03.119 ↗
55. TCCS 39:2022/TCĐBVN, in Specifications for design of Jointed Plain Cement Concrete Pavement for Highway. 2022: Ministry of Transport, Vietnam.
56. Physical and mechanical properties of concrete containing PET wastes as a partial replacement for fine aggregates
57. Effect of nano-SiO2 (NS) on dolomite concrete towards alkali silica reaction10.1016/j.hbrcj.2016.08.004 ↗
58. Abrasion and impact resistance of concrete produced with nano-silica10.1016/j.matpr.2021.10.268 ↗
59. High strength concrete containing natural pozzolan and silica fume10.1016/S0958-9465(00)00037-8 ↗