Advancing seismic resilience: Performance-based assessment of mid-rise and high-rise engineered cementitious composite (ECC) Buildings
Source abstract
Abstract
Engineering Cementitious Composites (ECC) have received wide attention in recent years due to their enhanced mechanical properties and ductility. These properties offer an opportunity to design structures with significantly improved seismic performance having a low-damage and ductile response. However, existing research studies primarily focus on the performance of ECC at material and member scales, resulting in a knowledge gap regarding its response at the structural level. This study examines the system-level seismic response of buildings designed using ECC and compares their performance with those having conventional reinforced concrete (RC) members. For this purpose, two RC shear wall buildings (7-story and 24-story) were selected as a case study, and their elements were separately designed (for the combined gravity and lateral loads) as RC and ECC elements using the guidelines recommended by the Japan Society of Civil Engineering (JSCE) and ACI (American Concrete Institute)-318-19. The design results show that the requirement of longitudinal steel is reduced by a maximum of 24% in ECC flexural members and by 15% in compression members, in addition to a significant reduction in the required transverse reinforcement as compared to the corresponding RC members. Similarly, owing to improved tensile behavior, the ECC members also exhibited a higher shear capacity than RC members. The detailed nonlinear finite element models of the case study buildings (for both the design cases i.e., ECC and RC) were subjected to monotonic and reversed-cyclic pushover analysis, and nonlinear time history analyses (NLTHA) under a set of selected ground motions. It was observed that ECC structures exhibited significantly improved lateral capacity, revered-cyclic response, and overall seismic performance as compared to the corresponding RC structures. These results demonstrate that ECC can be effectively used to design various members for improved seismic performance of buildings.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Seismic Performance and Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. World Population Day | United Nations, (n.d.). 〈https://www.un.org/en/observances/world-population-day〉 (2023).
2. Urban Development Overview, (n.d.). 〈https://www.worldbank.org/en/topic/urbandevelopment/overview〉 (2023).
3. Some significant environmental issues in high-rise residential building design in urban areas10.1016/j.enbuild.2003.07.005 ↗
4. Fatigue behaviour of plain and reinforced concrete: a systematic review10.1016/j.tafmec.2023.103867 ↗
5. Failure in plain and reinforced concrete—an analysis of crack width and crack spacing10.1016/0020-7683(95)00258-8 ↗
6. Mechanical behavior of high strength concrete reinforced with glass fiber
7. Fiber-reinforced polymer composites in strengthening reinforced concrete structures: a critical review10.1016/j.engstruct.2019.109542 ↗
8. Lei · Sustain. Des. Reinf. Concr. Beam · 2023
9. Seismic collapse safety of reinforced concrete buildings. II: comparative assessment of nonductile and ductile moment frames10.1061/(ASCE)ST.1943-541X.0000275 ↗
10. Effect of FRP wrapping in seismic performance of RC buildings with and without special detailing–A case study10.1016/j.compositesb.2012.09.031 ↗
11. Paulay · 1992
12. Innovative seismic retrofitting strategy of added stories isolation system10.1007/s11709-013-0195-9 ↗
13. Improving seismic performance of framed structures with steel curved dampers10.1016/j.engstruct.2016.09.063 ↗
14. Enhancing Seismic Resilience of Existing Reinforced Concrete Building Using Non-Linear Viscous Dampers: a comparative study10.3390/act12040175 ↗
15. Methods for improving the seismic performance of structures-A review
16. Fibre Reinforced Cementitious Composites, n.d.
17. Experimental study on mechanical properties of fiber reinforced concrete: effect of cellulose fiber, polyvinyl alcohol fiber and polyolefin fiber10.1016/j.conbuildmat.2020.120610 ↗
18. Mechanical properties of high-strength steel fiber-reinforced concrete10.1016/j.conbuildmat.2004.04.027 ↗
19. Tensile strain-hardening behavior of polyvinyl alcohol engineered cementitious composite (PVA-ECC)
20. From micromechanics to structural engineering the design of cementitious composites for civil engineering applications10.2208/jscej.1993.471_1 ↗
21. On engineered cementitious composites (ECC) a review of the material and its applications10.3151/jact.1.215 ↗
22. V.C. Li, Engineered Cementitious Composites (ECC) Bendable Concrete for Sustainable and Resilient Infrastructure, n.d.
23. V.C. Li, T. Hashida, Engineering ductile fracture in brittle-matrix composites, (1993).
24. Development of durable spray-applied fire-resistive Engineered Cementitious Composites (SFR-ECC)10.1016/j.cemconcomp.2015.03.012 ↗
25. Influence of micro-cracking on the composite resistivity of Engineered Cementitious Composites10.1016/j.cemconres.2014.01.002 ↗
26. Engineered cementitious composites with high-volume fly ash
27. Mechanical strength and microstructure of engineered cementitious composites: a new configuration for direct tensile strength, experimental and numerical analysis10.1016/j.conbuildmat.2020.121361 ↗
28. Cost-effective ECC with low fiber content for pavement application10.1051/matecconf/201927107001 ↗
29. Life cycle modeling of concrete bridge design: comparison of engineered cementitious composite link slabs and conventional steel expansion joints10.1061/(ASCE)1076-0342(2005)11:1(51) ↗
30. Application of overlay reinforcement method on steel deck utilizing engineered cementitious composites–Mihara Bridge
31. Dynamic life-cycle modeling of pavement overlay systems: capturing the impacts of users, construction, and roadway deterioration10.1061/(ASCE)IS.1943-555X.0000017 ↗
32. Guiding the design and application of new materials for enhancing sustainability performance: Framework and infrastructure application
33. Materials design for sustainability through life cycle modeling of engineered cementitious composites10.1617/s11527-007-9310-5 ↗
34. Tensile performance of sustainable Strain-Hardening Cementitious Composites with hybrid PVA and recycled PET fibers10.1016/j.cemconres.2018.02.013 ↗
35. The greening of engineered cementitious composites (ECC): a review10.1016/j.conbuildmat.2022.126701 ↗
36. Sustainable and cost-effective ultra-lightweight engineered cementitious composite: design and material characterization10.1016/j.cemconcomp.2022.104895 ↗
37. Practical design criteria for saturated pseudo strain hardening behavior in ECC10.3151/jact.4.59 ↗
38. Integrated structures and materials design10.1617/s11527-006-9146-4 ↗
39. Cyclic behavior of damaged reinforced concrete columns repaired with high-performance fiber-reinforced cementitious composite10.1016/j.engstruct.2017.01.015 ↗
40. Application of high performance fiber reinforced cementitious composites for damage mitigation of building structures case study on damage mitigation of RC buildings with soft first story10.3151/jact.4.35 ↗
41. Flexural/tensile-strength ratio in engineered cementitious composites10.1061/(ASCE)0899-1561(1994)6:4(513) ↗
42. M.M. Szerszen A. Szwed V.C. Li Flexural Response Reinf. beam High. ductility Concr. Mater. 2006.10.1533/9780857093080.263 ↗
43. Bond behavior between reinforcement and ultra-high toughness cementitious composite in flexural members10.1016/j.engstruct.2020.110357 ↗
44. H. Fukuyama Structural performance of engineered cementitious composite elements. composite and hybrid structures Proc. 6th ASCCS Conf., ASCCS-6 Secr. 2000 969 976.
45. Seismic response of exterior RC column-to-steel beam connections10.1061/(ASCE)0733-9445(2000)126:10(1113) ↗
46. Application of Engineered Cementitious Composites (ECC) in interior beam–column connections for enhanced seismic resistance10.1016/j.engstruct.2014.03.026 ↗
47. Structural behavior of RC engineered cementitious composite (ECC) exterior beam–column joints under reversed cyclic loading10.1016/j.conbuildmat.2016.01.001 ↗
48. Seismic behavior of 3-D ECC beam-column connections subjected to bidirectional bending and torsion10.1016/j.engstruct.2018.06.054 ↗
49. A.A. Abadel, Rehabilitation of post‐heated rectangular reinforced concrete columns using different strengthening configuration, Structural Concrete. (n.d.).
50. An experimental study on enhancing progressive collapse resistance using a steel fiber–reinforced concrete frame10.1061/(ASCE)ST.1943-541X.0003327 ↗
51. Numerical Investigations on the Seismic Behavior of FRP and TRM Upgraded RC Exterior Beam-Column Joints10.1061/(ASCE)CC.1943-5614.0000265 ↗
52. Seismic performance of R.C buildings with Beam-Column joints upgraded using FRP laminates
53. Evaluating the cracking behavior of ECC beam-column connections under cyclic loading by acoustic emission analysis10.1016/j.conbuildmat.2019.04.213 ↗
54. A predictive mimicker of fracture behavior in fiber reinforced concrete using machine learning10.3390/ma14247669 ↗
55. A.C.I. Commite, 318.(2019), Building Code Requirements for Structural Concrete. ACI. (n.d.).
56. Seismic evaluation and retrofit of existing buildings
57. Predicting mechanical properties of high-performance fiber-reinforced cementitious composites by integrating micromechanics and machine learning10.3390/ma14123143 ↗
58. U.J. Malik, S.A. Khokhar, M. Hammad, R. Khushnood, F.A. Najam, F. Ali, M. Shahid, Ann-Based Predictive Mimicker for Constitutive Model of Engineered Cementitious Composites (Ecc), Ann-Based Predictive Mimicker for Constitutive Model of Engineered Cementitious Composites (Ecc). (n.d.).
59. JSCE recommendations for design and construction of high performance fiber reinforced cement composite with multiple fine cracks
60. Minimum design loads and associated criteria for buildings and other structures
61. I.C. Council, I.C. of B. Officials, B. Officials, C.A. International, S.B.C.C. International, International building code 2000, Dearborn Trade Publishing, 2000.
62. A.C.I.C. 318, Building Code Requirements for Structural Concrete (ACI 318–19): An ACI Standard; Commentary on Building Code Requirements for Structural Concrete (ACI 318R-19), American Concrete Institute, 2019. 〈https://books.google.com.pk/books?id=5O_PxQEACAAJ〉.
63. A. Chatzidaki, D. Vamvatsikos, E. Hernández-Montes, Performance-based versus conventional seismic design: Comparative assessment on a 4-story RC moment frame, (2023).10.21203/rs.3.rs-3121394/v1 ↗
64. CTBUH, Recommendations for the seismic design of high-rise buildings–a consensus document, ” CTBUH Seismic Working Group. (2008).
65. Powell · 2007
66. U. of C.B. 2005. Pacific earthquake engineering research (PEER), PEER NGA Database, (n.d.).
67. Topographically-derived near-surface shear wave velocity map for Pakistan10.1142/S179343111650010X ↗
68. S. Zaman, T. Ornthammarath, P. Warnitchai, Probabilistic seismic hazard maps for Pakistan, in: 15th World Conference on Earthquake Engineering, Lisbon, Portugal, 2012.
69. Resilience of Medium-to-High-Rise Ductile Coupled Shear Walls Located in Canadian Seismic Zones and Strengthened with Externally Bonded Fiber-Reinforced Polymer Composite: Nonlinear Time History Assessment10.3390/jcs7080317 ↗
70. The Assessment and Retrofitting of Cultural Heritage—A Case Study of a Residential Building in Glina10.3390/buildings13071798 ↗
71. Modified Modal Pushover Design for Asymmetric-Plan RC Shear-Wall Structures
72. Modal Pushover Analysis for Seismic Performance Assessment of Underground Structures10.1080/13632469.2022.2061644 ↗
73. Seismic Response and Recentering Behavior of Reinforced Concrete Frames: a Parametric Study10.3390/app13148549 ↗
74. Role of higher-“mode” pushover analyses in seismic analysis of buildings10.1193/1.2085189 ↗
75. Chopra · 2003
76. A modal pushover analysis procedure to estimate seismic demands for unsymmetric‐plan buildings10.1002/eqe.380 ↗