Mechanical properties and damage constitutive of recycled aggregate concrete with polyvinyl alcohol fiber under compression and shear
Source abstract
Abstract
This paper researched the mechanical properties and damage constitutive of polyvinyl alcohol (PVA) fiber recycled aggregate concrete (RAC) under compression and shear. A total of 102 cube specimens were performed considering the effects of PVA fiber volume content, replacement ratios of recycled coarse aggregate, and normal stress. The shear strength, peak shear displacement and shear force-displacement relation of RAC were analyzed. The test results show that the shear strength increases with increasing normal stress and decreases with increasing replacement ratios of recycled coarse aggregate. The maximal shear strength generally appears at a PVA fiber content between 0.05 % and 0.1 % when identical to the normal stress and replacement ratios of recycled coarse aggregate. The peak shear displacement increases with increasing normal stress and PVA fiber volume content. The optimal PVA fiber content was 0.1 % considering the shear strength and shear displacement. It is suggested that a damage constitutive model be used to explain the shear force-displacement relationship of PVA fiber RAC in a compression-shear composite stress condition. The test findings and calculation results showed good consistency, proving that the damage constitutive model suggested in this research is applicable to PVA fiber RAC.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Toward the development of sustainable concretes with recycled concrete aggregates: comprehensive review of studies on mechanical properties10.1061/(ASCE)MT.1943-5533.0002304 ↗
2. Effect of biomineralization technique on the strength and durability characteristics of recycled aggregate concrete
3. Mechanical performance, water and chloride permeability of hybrid steel-polypropylene fiber-reinforced recycled aggregate concrete
4. Effective utilization and recycling of mixed recycled aggregates for a greener environment10.1016/j.jclepro.2019.07.075 ↗
5. A diagnosis of construction and demolition waste generation and recovery practice in the European Union
6. Performance evaluation of recycled aggregate concrete under multiaxial compression10.1016/j.conbuildmat.2019.116935 ↗
7. Enhancing the aggregate impact value and water absorption of demolition waste coarse aggregates with various treatment methods
8. Flexural performance and life-cycle assessment of multi-generation recycled aggregate concrete beams10.1016/j.jclepro.2022.132214 ↗
9. Shear behavior of reinforced recycled aggregate concrete beams after exposure to temperatures up to 600 °C10.1016/j.engstruct.2021.112756 ↗
10. Prediction of triaxial behavior of recycled aggregate concrete using multivariable regression and artificial neural network techniques10.1016/j.conbuildmat.2019.07.155 ↗
11. Acid resistance of quaternary blended recycled aggregate concrete
12. A large-scale life-cycle assessment of recycled aggregate concrete: the influence of functional unit, emissions allocation and carbon dioxide uptake10.1016/j.jclepro.2019.119243 ↗
13. Study on the penetration and diffusion of chloride ions in interface transition zone of recycled concrete prepared by modified recycled coarse aggregates
14. The incorporation of construction and demolition wastes as recycled mixed aggregates in non-structural concrete precast pieces10.1016/j.jclepro.2016.03.137 ↗
15. Flexural performance of reinforced concrete beams made with recycled concrete coarse aggregate10.1016/j.engstruct.2017.11.015 ↗
16. Durability performance of sustainable structural concrete: effect of coarse crushed concrete aggregate on microstructure and water ingress10.1016/j.conbuildmat.2017.03.232 ↗
17. Experimental development of low cement content and recycled construction and demolition waste aggregates concrete10.1016/j.conbuildmat.2020.121680 ↗
18. Mechanical properties and strength index conversion of recycled aggregate concrete under direct shear
19. Deformation performance and damage analysis of recycled concrete under direct shear condition
20. Mechanical properties of recycled aggregate concrete under compression-shear stress state10.1016/j.conbuildmat.2020.121894 ↗
21. Shear behavior of three types of recycled aggregate concrete10.1016/j.conbuildmat.2019.05.079 ↗
22. Experimental investigation on the mechanical behavior of polyvinyl alcohol fiber recycled aggregate concrete under triaxial compression10.1016/j.conbuildmat.2022.128825 ↗
23. Flexural behavior of steel fiber reinforced self-stressing recycled aggregate concrete-filled steel tube10.1016/j.jclepro.2020.122724 ↗
24. Effect of elevated temperature on axially and eccentrically loaded columns containing polyvinyl alcohol (PVA) fibers
25. Cost-to-performance assessment of polyvinyl alcohol fibers in concrete structures
26. Experimental study on mechanical properties of fiber reinforced concrete: effect of cellulose fiber, polyvinyl alcohol fiber and polyolefin fiber10.1016/j.conbuildmat.2020.120610 ↗
27. Fracture behavior and damage evaluation of polyvinyl alcohol fiber concrete using acoustic emission technique10.1016/j.matdes.2012.03.051 ↗
28. Bonding behavior of concrete matrix and alkali-activated mortar incorporating nano-SiO2 and polyvinyl alcohol fiber: theoretical analysis and prediction model10.1016/j.ceramint.2021.08.044 ↗
29. Mechanical properties of geopolymer concrete containing polyvinyl alcohol fiber exposed to high temperature10.1016/j.conbuildmat.2016.09.001 ↗
30. JGJ52-2006 · 2006
31. GB/T 25177-2010 · 2010
32. Mechanical properties of recycled concrete made with different types of coarse aggregate10.1016/j.conbuildmat.2016.12.163 ↗
33. Effects of coral, recycled and natural coarse aggregates on the mechanical properties of concrete10.1016/j.conbuildmat.2018.10.111 ↗
34. The effect of multi-recycling on the mechanical performance of coarse recycled aggregates concrete10.1016/j.conbuildmat.2018.07.178 ↗
35. GB175-2007, Common Portland Cement, Standards Press of China, Beijing, China, 2007. (in Chinese).
36. Influence of the pre-saturation of recycled coarse concrete aggregates on concrete properties10.1680/macr.2011.63.8.617 ↗
37. Influence of parent concrete on the properties of recycled aggregate concrete10.1016/j.conbuildmat.2008.03.006 ↗
38. Shear strength components of concrete under direct shearing10.1016/j.cemconres.2007.02.021 ↗
39. Shear-friction behavior of recycled and natural aggregate concrete—an experimental investigation
40. Direct shear behavior of sulfate-exposed shotcrete: experimental and modelling research10.1016/j.conbuildmat.2019.03.229 ↗
41. Shear behaviour of a cement grout tested in the direct shear test10.1016/j.conbuildmat.2018.01.151 ↗
42. Static mechanical properties of polyvinyl alcohol fibre reinforced concrete (PVA-FRC)10.1680/macr.13.00320 ↗
43. Combined influence of nano-CaCO3 and polyvinyl alcohol fibers on fresh and mechanical performance of concrete incorporating fly ash10.1002/suco.201900134 ↗
44. Damage evolution study of concrete under joint action of compression and shear
45. Guo · 2013
46. A statistical damage constitutive model for softening behavior of rocks10.1016/j.enggeo.2012.05.005 ↗