journal article·2022-12Open access

A sustainable approach on the utilisation of COVID-19 plastic based isolation gowns in structural concrete

Shannon Kilmartin-Lynch, Rajeev Roychand, Mohammad Saberian, Jie Li, Guomin Zhang, Sujeeva Setunge

Abstract

Single-use isolation gowns have become an important practice across medical centres, testing sites, and emergency rooms since the onset of the Coronavirus pandemic; within the later months of 2019. Although reusable isolation gowns have proved beneficial, 80% of frontline centres opt for disposable isolation gowns, increasing the demand for plastic-based personal protective equipment (PPE) and the environmental strain from excess waste in landfills. This research aims to explore the practicability of using plastic-based isolation gowns in structural concrete to scale back the quantity of pandemic-generated waste ending up in landfills. The shredded isolation gowns were added to aggregates at 0.01%, 0.02%, and 0.03% of the volume of concrete. The effects of various concentrations of shredded isolation gowns on the mechanical properties of the concrete were investigated through a series of experiments alongside an SEM-EDS analysis. Results demonstrate an enhanced bridging effect between the cement matrix and shredded isolation gowns, allowing for the steady trend of improved mechanical properties with increases of 15.5%, 20.6%, and 11.73% across compressive strength, flexural strength, and the modulus of elasticity, respectively.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Healthcare and Environmental Waste Management · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Environmental impacts of COVID-19 on Victoria, Australia, witnessed two waves of Coronavirus
2. An emerging source of plastic pollution: environmental presence of plastic personal protective equipment (PPE) debris related to COVID-19 in a metropolitan city10.1016/j.envpol.2020.116160 ↗
3. Indirect effects of COVID-19 on the environment
4. Research, I.G. 2021. Global Isolation Gowns Market (2020–2025) By Product Type, Distribution Channel, End Users and Geography and the Impact of Covid-19 with Ansoff Analysis. Infogence Global Research.
5. Suggested guidelines for emergency treatment of medical waste during COVID-19: Chinese experience10.1007/s42768-020-00039-8 ↗
6. Medical waste disposal method selection based on a hierarchical decision model with intuitionistic fuzzy relations10.3390/ijerph13090896 ↗
7. COVID-19 Pandemic Repercussions on the Use and Management of Plastics10.1021/acs.est.0c02178 ↗
8. Repurposing of COVID-19 single-use face masks for pavements base/subbase10.1016/j.scitotenv.2021.145527 ↗
9. Impact of COVID-19 pandemic on waste management10.1007/s10668-020-00956-y ↗
10. Cutler, S. 2020. Mounting Medical Waste from COVID-19 Emphasizes the Need for a Sustainable Waste Management Strategy [Online]. Frost & Sullivan. Available: https://www.frost.com/frost-perspectives/managing-the-growing-threat-of-covid-19-generated-medical-waste/ [Accessed].
11. Emerging challenges in urban waste management in Tehran, Iran during the COVID-19 pandemic10.1016/j.resconrec.2020.105051 ↗
12. Single-use surgical face masks, as a potential source of microplastics: Do they act as pollutant carriers?10.1016/j.molliq.2020.115247 ↗
13. Understanding the fate and control of road dust-associated microplastics in stormwater10.1016/j.psep.2021.05.033 ↗
14. Pathway, classification and removal efficiency of microplastics in wastewater treatment plants10.1016/j.envpol.2019.113326 ↗
15. Fate of road-dust associated microplastics and per-and polyfluorinated substances in stormwater10.1016/j.psep.2020.07.020 ↗
16. Identification of micro-plastics in Australian road dust10.1016/j.jece.2019.103647 ↗
17. Use of COVID-19 single-use face masks to improve the rutting resistance of asphalt pavement
18. Face mask and medical waste disposal during the novel COVID-19 pandemic in Asia10.1016/j.cscee.2020.100052 ↗
19. Accumulation of plastic waste during COVID-1910.1126/science.abd9925 ↗
20. Mechanical properties of polypropylene plastic waste usage and high-density polyethylene in concrete10.1088/1757-899X/620/1/012034 ↗
21. Characteristics of Recycled Polypropylene Fibers as an Addition to Concrete Fabrication Based on Portland Cement10.3390/ma13081827 ↗
22. High energy absorbent ultra-high-performance concrete with hybrid steel and polyethylene fibers10.1016/j.conbuildmat.2019.03.096 ↗
23. Feasibility of concrete mixtures containing cross-linked polyethylene waste materials10.1016/j.conbuildmat.2019.07.285 ↗
24. Preliminary evaluation of the feasibility of using polypropylene fibres from COVID-19 single-use face masks to improve the mechanical properties of concrete10.1016/j.jclepro.2021.126460 ↗
25. Application of COVID-19 single-use shredded nitrile gloves in structural concrete: case study from Australia
26. Design and strength optimization method for the production of structural lightweight concrete: an experimental investigation for the complete replacement of conventional coarse aggregates by waste rubber particles10.1016/j.resconrec.2022.106390 ↗
27. Effect of crushed glass on the mechanical and microstructural behavior of highly expansive clay subgrade
28. A comprehensive review on the mechanical properties of waste tire rubber concrete10.1016/j.conbuildmat.2019.117651 ↗
29. Recycling biosolids as cement composites in raw, pyrolyzed and ashed forms: a waste utilisation approach to support circular economy
30. Recycling steel slag from municipal wastewater treatment plants into concrete applications–A step towards circular economy10.1016/j.resconrec.2019.104533 ↗
31. Recycling of spent coffee grounds in construction materials: a review10.1016/j.jclepro.2021.125837 ↗
32. Mechanical performance and durability of geopolymer lightweight rubber concrete
33. Development of crumb rubber concrete for practical application in the residential construction sector–design and processing10.1016/j.conbuildmat.2020.119813 ↗
34. Effect of alum sludge ash on the high-temperature resistance of mortar10.1016/j.resconrec.2021.105958 ↗
35. Properties of mortar incorporating untreated and treated drinking water treatment sludge10.1016/j.conbuildmat.2021.122558 ↗
36. Practical Rubber Pre-treatment Approach for Concrete Use – An Experimental Study
37. General purpose and blended cements
38. Aerosol and surface stability of SARS-CoV-2 as compared with SARS-CoV-110.1056/NEJMc2004973 ↗
39. Jhatial, A.A., Goh, W.I., Mastoi, A.K., Traore, A.F., Oad, M. 2021. Environmental assessment and mechanical properties of Polypropylene fibres reinforced ternary binder foamed concrete. Environmental Science and Pollution Research.10.1007/s11356-021-15076-x ↗
40. Production of eco-friendly concrete incorporating rice husk ash and polypropylene fibres10.1007/s11356-021-13418-3 ↗
41. Effect of curing regime on the performance and microstructure characteristics of alkali-activated slag-fly ash blended concrete
42. Effects of curing conditions on the MECHANICAL and microstructural properties of ultra-high-performance concrete (UHPC) incorporating iron tailing powder
43. Development of zero cement composite for the protection of concrete sewage pipes from corrosion and fatbergs10.1016/j.resconrec.2020.105166 ↗
44. Novel fibrous concrete mixture made from recycled PVC fibers from electronic waste
45. Influence of nylon fibers recycled from the scrap brushes on the properties of concrete: valorization of plastic waste in concrete
46. Review on the Durability of Polypropylene Fibre-Reinforced Concrete
47. Bheel · Exp. Study Eng. Prop. Cem. Concr. Reinf. Nylon Jute Fibers · 2021 · 11 · 454
48. Methods of testing concrete - method for making and curing concrete- compression and indirect tensile test specimens
49. Methods of testing concrete - method for making and curing concrete - Flexural test specimens
50. Methods of testing concrete - compressive Stregnth tests- Concrete, mortat and grout specimens
51. AS 1012.11 - 2000 (2014): Methods of testing concrete - Determination of the modulus of rupture. Standards Australia, Sydney, NSW.
52. AS 1012.17 - 1997 (R2014): Methods of testing concrete - Determination of the static chord modulus of elasticty and Poisson's ratio of concrete specimen. Standards Australia, Sydney, NSW.
53. Standard Test Method for Pulse Velocity Through Concrete
54. Standard Test Method for Water Absorption of Plastics
55. Standard Test Method for Tensile Properties of Plastics
56. Standard Test Method to Determine Melting Temperature of Synthetic Fibers
57. GB/T 20097 · Prot. Cloth. -- Gen. Requir. Gen. Adm. Qual. Superv., Insp., Quar., Stand. Adm. PRC · 2006