Improvement effect of different modifiers on storage stability of high content SBS modified asphalt
Source abstract
Abstract
High content Styrene-butadiene-styrene (SBS) modified asphalt binder is commonly used for permeable pavements attribute to reasonable adhesion ability, deformation resistance and toughness. However, due to the large difference in molecular weight between styrene-butadiene-styrene block copolymer and asphalt, the compatibility between SBS and asphalt has always been a key issue restricting its development. To improve the compatibility of high content SBS modified asphalt, the preparation process of high content SBS modified asphalt (shear time, temperature, rate, modifier content) was investigated by orthogonal experimental design method. The effects of modifiers (polyphosphoric acid, montmorillonite, and sulfur) on the physical properties and compatibility of high content SBS modified asphalt were investigated by physical property tests, storage stability tests and dynamic shear rheology tests. The results shows that all three additives have improved the storage stability of high content SBS-modified asphalt, among which, nano montmorillonite has the best comprehensive improvement effect. In addition, the preparation process of high content SBS modified asphalt will also affect its physical properties and compatibility. When the content of MMT and SBS is 2% and 8% respectively, the shear temperature is 170 °C, the shear rate is 4000 rpm, and the shear time is 150 min, the high and low temperature performance of high content SBS modified asphalt is good and the compatibility is the best.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Analysis of stress-strain behavior in engineered geopolymer composites reinforced with hybrid PE-PP fibers: a focus on cracking characteristics10.1016/j.compstruct.2023.117437 ↗
2. Ternary cementless composite based on red mud, ultra-fine fly ash, and GGBS: Synergistic utilization and geopolymerization mechanism
3. Real-time assessment of asphalt pavement moduli and traffic loads using monitoring data from built-in sensors: optimal sensor placement and identification algorithm10.1016/j.ymssp.2022.109930 ↗
4. New innovations in pavement materials and engineering: a review on pavement engineering research 2021
5. A review on the heat transfer in asphalt pavements and urban heat island mitigation methods
6. Advancements in phase change materials in asphalt pavements for mitigation of urban heat island effect: bibliometric analysis and systematic review10.3390/s23187741 ↗
7. Effect of nanographite conductive concrete mixed with magnetite sand excited by different alkali activators and their combinations on the properties of conductive concrete10.3390/buildings13071630 ↗
8. Evaluation of open-grade friction course (OGFC) mixtures with high content SBS polymer modified asphalt10.1016/j.conbuildmat.2020.121374 ↗
9. Preparation and effectiveness of composite phase change material for performance improvement of Open Graded Friction Course10.1016/j.jclepro.2019.01.001 ↗
10. Swelling-degradation dynamic evolution behaviors of bio-modified rubberized asphalt under thermal conditions10.1016/j.jclepro.2023.139061 ↗
11. Properties and mechanism of SBS/crumb rubber composite high viscosity modified asphalt10.1016/j.jclepro.2022.134534 ↗
12. Study on the conventional performance and microscopic properties of PPA/SBS-modified bio-mixed asphalt10.3390/ma15124101 ↗
13. Morphology, chemical reaction mechanism, and cross-linking degree of asphalt binder modified by SBS block co-polymer10.1016/j.conbuildmat.2023.131204 ↗
14. High-temperature rheological behavior and fatigue performance of lignin modified asphalt binder10.1016/j.conbuildmat.2019.117063 ↗
15. Using polyphosphoric acid and sulfur to improve storage stability, aging, and rheological properties of high-density polyethylene–modified asphalt binder10.1520/JTE20190804 ↗
16. Storage stability and anti-aging performance of SEBS/organ-montmorillonite modified asphalt10.1016/j.conbuildmat.2022.127875 ↗
17. Effect mechanism of acidification and vulcanization on SBS-modified asphalt10.1515/ipp-2022-4233 ↗
18. Mechanism and performance investigation of SBS/sulfur composite modified asphalt10.1134/S0965544122050140 ↗
19. High-temperature rheological properties of asphalt binders with polymeric, warm-mix, and rubber particulate additives10.1061/(ASCE)MT.1943-5533.0002589 ↗
20. Preparation process and performance of polyurethane-modified bitumen for ultrathin asphalt layers10.1061/JMCEE7.MTENG-15882 ↗
21. High-temperature rheological behavior and fatigue performance of lignin modified asphalt binder10.1016/j.conbuildmat.2019.117063 ↗
22. Mechanical behavior of polymer-modified bituminous mastics. I: experimental approach
23. Experimental study on resilient modulus and dynamic modulus of foam warm mix recycled asphalt mixture
24. Modelling of asphalt mixes based on X-ray computed tomography and random heterogeneous generation10.1080/10298436.2018.1559316 ↗
25. Roles of aromatic oil, polyphosphoric acid and sulfur on the storage stability and compatibility of high-viscosity particle modified asphalt10.1016/j.conbuildmat.2022.129643 ↗
26. PPA / LSBR composite modified asphalt and mixture performance research
27. Experimental study on properties of nano-montmorillonite/SBS modified asphal
28. Investigating the effectiveness of nano-montmorillonite on asphalt binder from rheological, thermodynamics, and chemical perspectives10.3390/ma14061433 ↗
29. Enhanced storage stability of different polymer modified asphalt binders through nano-montmorillonite modification10.3390/nano10040641 ↗
30. Nguyen · 2021
31. Study on the performance of polyphosphoric acid-rubber composite modified asphalt and its mixture
32. Preparation and performances of SBS compound modified asphalt mixture by acidification and vulcanization10.1016/j.conbuildmat.2021.123693 ↗
33. Changes in the rheological characteristics of asphalt binders modified with soybean-derived materials10.1080/10298436.2019.1600690 ↗
34. Rheological properties, compatibility, and storage stability of SBS latex-modified asphalt10.3390/ma12223683 ↗