journal article·2022-06Open access

Influence of nano waste materials on the mechanical properties, microstructure, and corrosion resistance of self-compacted concrete

Reham M. Hussien, L.M. Abd el-Hafez, R.A.S. Mohamed, A. Serag Faried, Naglaa G. fahmy

Abstract

Recycling nano wastes materials (NWM) including nano waste glass (NWG) and nano waste ceramic (NWC) as an eco-friendly alternative binder helps the reclamation of construction waste and reduces the demand for cement. Considering that self-compacted concrete (SCC) which needs high powder content has been largely used in building engineering due to its high flowability, which allows it to self-compact and maintain homogeneity without separation, and thus, substituting NWM for partial cement in preparing SCC is more sustainable. This paper explores the effect of replacing cement in SCC with nanomaterials that were made in two ways. The first way is the milling technique, where glass and ceramic wastes are converted to NWM to overcome the problem of some wastes and the emission of CO2 during ordinary Portland cement manufacturing. The second way Also, to compare the behavior, a chemically prepared NS by precipitation technique was used. Several SCC mixes were made using nanomaterials as cement replacement materials with replacing percent up to 5% and analyzed. Fresh properties, mechanical characteristics, microstructure, and corrosion rate of SCC mixes were studied. The testing results revealed that SCC's flowability, passing ability, and viscosity declined as the NS, NWG, and NWC increased while being within the EFNARC-2005 recommended limit. Waste-milled nanomaterials are comparable to nano-silica, which is chemically prepared to improve SCC mechanical properties and purify the microstructure; replacing cement with 3% NWG increased compressive strength by 32.4%, while NWC and NS increased compressive strength by 17.3% and 26.4%, respectively. Replacing cement with nanomaterials decreases the anodic and cathodic overpotentials and shifts the corrosion potential (Ecorr) of high-strength steel (HSS) embedded in SCC specimens cured in 3.5% NaCl solution to preferable values, in addition to reducing the current densities of corrosion (Icorr).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. “Mix design procedure for self-compacting concrete,”10.9790/3021-02933341 ↗
2. and Kunal, "Design and development of self-compacting concrete made with coal bottom ash
3. Effect of inert and pozzolanic materials on flow and mechanical properties of self-compacting concrete
4. “Influence of glass powder on the properties of concrete,”10.14445/22315381/IJETT-V16P242 ↗
5. Properties of Self-Consolidating Concrete Containing Limestone Filler
6. “A preliminary concrete mix design for SCC with marble powders,”10.1016/j.conbuildmat.2008.08.012 ↗
7. “Mechanical and durability properties of self-compacting concrete with blended binders,”
8. A critical review on effect of nanomaterials on workability and mechanical properties of high-performance concrete
9. “Nanotechnology Safety In The Construction And Infrastructure Industries,” in
10. “Modern developments related to Nano-technology and Nano-engineering of concrete,”10.1007/s11709-016-0343-0 ↗
11. “Influence of carbon Nano-tubes, Nano-silica and Nano-metakaolin on some morphological-mechanical properties of oil well cement pastes subjected to elevated water curing temperature and regular room air curing temperature,”10.1016/j.conbuildmat.2017.04.124 ↗
12. “The fresh properties of Nano- silica incorporating polymer-modified cement pastes,”10.1016/j.conbuildmat.2018.02.084 ↗
13. Self sensing carbon Nano-tube (CNT) and Nano-fiber (CNF) cementitious composites for real time damage assessment in smart structures10.1016/j.cemconcomp.2014.07.003 ↗
14. Review on concrete nano-technology10.1080/19648189.2015.1042070 ↗
15. “Mechanical properties and durability of concrete specimens containing Nano- silica in sulfuric acid rain condition,”10.1016/j.conbuildmat.2018.01.137 ↗
16. “Mechanical properties and microstructure of high performance concrete containing stabilized Nano-silica,”
17. “Research progress in advanced Nano-mechanical characterization of cement-based materials,”10.1016/j.cemconcomp.2018.09.016 ↗
18. “Synergistic effects of micro-silica and Nano-silica on strength and microstructure of mortar,”10.1016/j.conbuildmat.2017.02.115 ↗
19. “Sustainability of nano-materials based self-healing concrete: an all-inclusive insight,”10.1016/j.jobe.2019.01.032 ↗
20. “The influence of Nano-Fe3O4 on the microstructure and mechanical properties of cementitious composites,”10.1186/s11671-016-1401-1 ↗
21. “Nanoscience of cement and concrete,”
22. “Controlling cement hydration with Nano-particles,”10.1016/j.cemconcomp.2014.12.003 ↗
23. “The influence of Nano-silica on the hydration of ordinary Portland cement,”10.1007/s10853-011-5881-1 ↗
24. “Interfacial characteristics of nano-engineered concrete composites,”10.1016/j.conbuildmat.2020.119803 ↗
25. “Effect and mechanisms of nanomaterials on interface between aggregates and cement mortars,”10.1016/j.conbuildmat.2019.117942 ↗
26. “Facile production of nano-scale metakaolin: an investigation into its effect on CS, pore structure and microstructural characteristics of mortar,”10.1016/j.conbuildmat.2018.03.249 ↗
27. “Hydration, microstructure and phase composition of composite cements containing Nano-clay,”10.1016/j.conbuildmat.2016.02.177 ↗
28. “The role of SiO2 Nano-particles and ground granulated blast furnace slag admixtures on physical, thermal and mechanical properties of self compacting concrete,”10.1016/j.msea.2010.11.064 ↗
29. Feasibility of using Nano-particles of SiO2 to improve the performance of recycled aggregate concrete10.1155/2018/1512830 ↗
30. “Effects of nano-particles on failure process and microstructural properties of recycled aggregate concrete,”10.1016/j.conbuildmat.2017.03.051 ↗
31. “Investigation of the effects of Nano-silica on the properties of concrete in comparison with micro-silica,”
32. “Effects of additional Nano-silica of CS on mortar,”
33. Reduction of cement consumption by the aid of silica Nano-particles (investigation on concrete properties)10.3846/13923730.2012.698912 ↗
34. “Evaluation of glass powder-based geopolymer stabilized road bases containing recycled waste glass aggregate,”10.1177/0361198119898695 ↗
35. The influence of waste glass powder as a pozzolanic material in concrete
36. "Influence of Nano-particles from waste materials on mechanical properties, durability and microstructure of UHPC,"10.3390/ma13204530 ↗
37. S. Chikhalikar and S. Tande, "An experimental investigation on characteristics properties of fibre reinforced concrete containing waste glass powder as pozzolona," in 37th Conference on Our World in Concrete and Structures, Singapore, August, 2012.
38. “Strength and durability of recycled aggregate concrete containing milled glass as partial replacement for cement,”10.1016/j.conbuildmat.2011.10.061 ↗
39. “Effect of using glass powder in concrete,”
40. S. Ali, A. El-Dieb, S. Aboubakr, and M. Taha, "Utilization of ceramic waste powder in self-compacting concrete," in Fourth international conference on sustainable construction materials and technologies SCMT4, 2016.
41. “Chemical, microstructural and mechanical properties of ceramic waste blended cementitious systems,”10.1016/j.jclepro.2018.11.240 ↗
42. “Exploitation of the Nano-waste ceramic incorporated with Nano- silica to improve concrete properties,”
43. “Applications of using nano- material in concrete: a review,”10.1016/j.conbuildmat.2016.12.005 ↗
44. “Characterization of Nano-silica prepared from local silica sand and its application in cement mortar using optimization technique,”10.1016/j.apt.2015.05.008 ↗
45. “Synthesis and characterization of Nano-silica prepared by precipitation method,”10.1016/j.colsurfa.2004.03.021 ↗
46. “Nanostructure formation and steady-state grain size of ball-milled iron powders,”10.1016/S0921-5093(97)80063-9 ↗
47. “Effect of high-volume ceramic waste powder as partial cement replacement on fresh and compressive strength of self-compacting concrete,”10.1061/(ASCE)MT.1943-5533.0002588 ↗
48. The-European-Project-Group · 2005
49. ASTM C39/C39M. Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens;ASTM International: West Conshohocken, PA, USA, 2018.
50. ASTM C496/C496M-17. Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens;ASTM International: West Conshohocken, PA, USA, 2017.
51. ASTM C1609/C1609M · 2010
52. “Mechanical and durability properties of high volume fly ash (HVFA) concrete containing calcium carbonate (CaCO3) nanoparticles,”10.1016/j.conbuildmat.2014.07.099 ↗
53. “Strength, permeability and microstructure of self-compacting concrete containing rice husk ash,”10.1016/j.biosystemseng.2014.12.005 ↗
54. “Effect of rice husk ash on concrete,”
55. Sobolev, F. Sanchez, and I. Vivian, "The use of Nano-particle admixtures to improve the performance of concrete," in the 12th International Conference on Recent Advances in Concrete Tchnology and Sustainability, 2012, pp. 455–469.
56. “Influence of Al2O3 Nano-particles on the CS and workability of blended concrete,”
57. “The effects of seawater and Nano-silica on the performance of blended cements and composites,”10.1007/s13204-020-01328-8 ↗
58. “Evaluation of the Nano- silica and Nano- waste materials on the corrosion protection of high strength steel embedded in ultra-high-performance concrete,”10.1038/s41598-021-82322-0 ↗