Research on the pretreatment and mechanical performance of undisturbed phosphogypsum
Source abstract
Abstract
In this study, dehydration process of original phosphogypsum (PG) was firstly studied by differential thermal analysis method, and the optimal heat treatment temperature was obtained. Subsequently, the effects of dehydration time and ageing time on compressive and flexural strengths of PG pastes were studied. Additionally, the influence of blast furnace slag, silica fume and Portland cement on compressive strength of PG were determined. Results showed that CaSO4·2H2O in PG were dehydrated at three steps and the related dehydration temperatures were 80 ℃, 140 ℃ and 160 ℃. When the dehydration duration at 140 ℃ was 9 h and the ageing time was 5 d the PG paste obtained the best flexural and compressive strength. The addition of blast furnace slag and cement behaved a positive effect on the mechanical strength of PG. The 28 d compressive strength of PG mixture was increased by 97.8 % when the dosage of cement was 40 % by the mass ratio of total binder. Unfortunately, fly ash led to the decreasing mechanical strengths of PG mixture.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Rock Mechanics and Modeling · Concrete and Cement Materials Research · Nuclear materials and radiation effects
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Effect of fast firing on composition and cementations’ properties of phosphogypsum dehydration phase
2. Research on hydration and hardening mechanism and water resistance of desulphurization gypsum fly ash cementing material
3. Research on activity characteristics on composite cementitious materials based on phosphogypsum10.1016/j.proeng.2012.08.003 ↗
4. Effect of water-binder ratio on properties of phosphogypsum binder10.1088/1757-899X/660/1/012071 ↗
5. Technological properties of phosphogypsum binder obtained from fertilizer production waste10.1016/j.egypro.2018.07.096 ↗
6. The investigation of phosphogypsum specimens processed by press-forming method
7. Mechanical activation on phosphogypsum: hydrosodalite system10.1007/s12649-018-0339-1 ↗
8. Investigation on phosphogypsum-steel slag-granulated blast-furnace slag-limestone cement10.1016/j.conbuildmat.2009.12.006 ↗
9. Utilization of waste phosphogypsum to prepare non-fired bricks by a novel hydration-recrystallization process10.1016/j.conbuildmat.2012.02.045 ↗
10. A novel two-step hydration process of preparing cement-free non-fired bricks from waste phosphogypsum10.1016/j.conbuildmat.2014.09.075 ↗
11. Phosphogypsum as a construction material10.1016/j.jclepro.2017.08.049 ↗
12. Effectiveness of novel and traditional methods to incorporate industrial wastes in cementitious materials – an overview10.1016/j.resconrec.2013.03.003 ↗
13. The application of electrical parameters to reflect the hydration process of cement paste with rice husk ash10.3390/ma12172815 ↗
14. Mathematical and numerical analysis of dehydratation of gypsum plasterboards exposed to fire
15. The thermal dehydration of synthetic gypsum10.1016/0040-6031(95)02521-9 ↗
16. The thermal dehydration of natural gypsum and pure calcium sulphate dihydrate (gypsum)10.1016/0040-6031(95)02819-6 ↗
17. Gypsum dehydration in cement and its impact on air-void structure in air-entrained concrete10.1016/j.conbuildmat.2019.06.011 ↗
18. Pressure-induced structural phase transition and dehydration for gypsum investigated by Raman spectroscopy and electrical conductivity10.1016/j.cplett.2018.06.007 ↗
19. Permeability control on transient slip weakening during gypsum dehydration: implications for earthquakes in subduction zones10.1016/j.epsl.2016.02.015 ↗
20. Effects of fibers on mechanical properties and freeze-thaw resistance of phosphogypsum-slag based cementitious materials10.1016/j.conbuildmat.2016.06.003 ↗
21. Loess stabilization using cement, waste phosphogypsum, fly ash and quicklime for self-compacting rammed earth construction10.1016/j.conbuildmat.2019.117195 ↗
22. Effect of PCM on the hydration process of cement-based mixtures: a novel thermo- mechanical investigation10.3390/ma11060871 ↗
23. Comparison of the surface roughness of gypsum modelsconstructed using various impression materials and gypsum products10.1016/j.jds.2012.11.002 ↗