Interaction effect of recycled aggregate type, moisture state, and mixing process on the properties of high-performance concretes
Source abstract
Abstract
This paper presents the results of a laboratory study and statistical analysis to determine the effect of the combination of three key parameters on the properties of high-performance concretes with recycled aggregates: mixing procedure, aggregate moisture states, and aggregate type. The study included evaluation of slump, compressive, flexural, and splitting tensile strength, modulus of elasticity, and drying shrinkage of concretes with a water/cementitious ratio of 0.45. Statistical analysis of the experimental data included one-way analysis of variance (ANOVA) and post hoc test. The results showed that it is possible to produce high quality concretes using recycled coarse aggregates by manipulating the above mentioned parameters, which is a technical, economical, and sustainable alternative to natural aggregate concretes. The two-stage mixing approach had a positive effect on workability, strength, and drying shrinkage. Aggregates in the pre-saturated state showed higher performance than those in the oven-dried and saturated surface-dried states.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Vince Beiser, Why-the-World-is-Running-Out-of-Sand. https://www.bbc.com/future/article/20191108-why-the-world-is-running-out-of-sand, (Accessed 17 November 2019). 2019.
2. Assessment of durability of recycled aggregate concrete produced by two-stage mixing approach10.1007/s10853-006-0379-y ↗
3. Structural behavior of RC beams containing EAF slag as recycled aggregate: numerical versus experimental results10.1016/j.conbuildmat.2018.03.128 ↗
4. Structural behavior of reinforced concrete incorporating glass waste as coarse aggregate
5. Ultra-violet and chemical treatment of crumb rubber aggregate in a sustainable concrete mix
6. Interfacial characteristics of cement mortars containing aggregate derived from industrial slag waste
7. Shear friction response of lightweight concrete using bottom ash aggregates and air foams
8. Recycled concrete with coarse recycled aggregate. An overview and analysis10.3989/mc.2018.13317 ↗
9. Incorporating recycled aggregates in self-compacting concrete: a review
10. The influence of recycled concrete aggregate on the properties of concrete10.1051/matecconf/201816202020 ↗
11. Experimental studies on utilization of recycled coarse and fine aggregates in high performance concrete mixes10.1016/j.aej.2017.05.003 ↗
12. Composite behaviour of wide sandwich panels with thin high performance recycled aggregate concrete wythes with fibre reinforced polymer shear connectors
13. Performance evaluation of construction and demolition waste aggregates as an alternative base course material in highway construction
14. A review of recycled aggregate in concrete applications (2000–2017)10.1016/j.conbuildmat.2018.03.240 ↗
15. Study of recycled concrete aggregate quality and its relationship with recycled concrete compressive strength using database analysis10.3989/mc.2016.06415 ↗
16. Strength and durability evaluation of recycled aggregate concrete10.1007/s40069-015-0100-0 ↗
17. Influence of mineral additions on the performance of 100% recycled aggregate concrete10.1016/j.conbuildmat.2009.02.004 ↗
18. Effect of recycled concrete coarse aggregate from multiple sources on the hardened properties of concrete with equivalent compressive strength10.1016/j.conbuildmat.2013.05.074 ↗
19. Quality improvement techniques for recycled concrete aggregate: a review10.3151/jact.17.151 ↗
20. Effect of mineral additives and two-stage mixing on the performance of recycled aggregate concrete10.1007/s10163-020-01048-9 ↗
21. Fresh-state performance of recycled aggregate concrete: a review10.1016/j.conbuildmat.2018.05.149 ↗
22. Comparing performance of modified two-stage mixing approach for producing recycled aggregate concrete10.1680/macr.2006.58.7.477 ↗
23. Microstructure analysis of hardened recycled aggregate concrete10.1680/macr.2006.58.10.683 ↗
24. Methods to improve microstructural properties of recycled concrete aggregate: a critical review10.1016/j.conbuildmat.2020.121490 ↗
25. Development of processing methods to improve strength of concrete with 100% recycled coarse aggregate10.1061/(ASCE)MT.1943-5533.0000909 ↗
26. Hybrid methods to improve microstructure of recycled concrete and brick aggregate for high-grade concrete production10.1680/jmacr.21.00233 ↗
27. An overview on the efficiency of different pretreatment techniques for recycled concrete aggregate10.1016/j.jclepro.2020.121264 ↗
28. Influence of coating recycled aggregate surface with pozzolanic powder on properties of recycled aggregate concrete10.1016/j.conbuildmat.2008.07.019 ↗
29. Treatments for the improvement of recycled aggregate10.1061/(ASCE)0899-1561(2004)16:6(597) ↗
30. Modifying recycled aggregate concrete by aggregate surface treatment using sulphoaluminate cement and basalt powder10.1016/j.conbuildmat.2018.10.160 ↗
31. Methods for improving the durability of recycled aggregate concrete: a review10.1016/j.jmrt.2021.11.085 ↗
32. Assessment of mechanical properties of concrete incorporating carbonated recycled concrete aggregates10.1016/j.cemconcomp.2015.10.018 ↗
33. Effect of pozzolan slurries on recycled aggregate concrete: mechanical and durability performance10.1016/j.conbuildmat.2020.121940 ↗
34. Properties of recycled concrete aggregates strengthened by different types of pozzolan slurry10.1016/j.conbuildmat.2019.04.231 ↗
35. A critical review and assessment for usage of recycled aggregate as sustainable construction material10.1016/j.conbuildmat.2016.11.029 ↗
36. Biocement treatment for upcycling construction and demolition wastes as concrete aggregates10.1617/s11527-022-01955-3 ↗
37. ASTM C192
38. Diversifying two-stage mixing approach (TSMA) for recycled aggregate concrete: TSMAs and TSMAsc10.1016/j.conbuildmat.2007.07.024 ↗
39. K. Ng, C.M. Tam, V.W.Y. Tam, Deformation and Sorptivity of Recycled Aggregate Concrete Produced by Two State Mixing Approach, 2006.
40. Effect and mechanism of surface-coating pozzalanics materials around aggregate on properties and ITZ microstructure of recycled aggregate concrete10.1016/j.conbuildmat.2009.10.038 ↗
41. Influence of the pre-saturation of recycled coarse concrete aggregates on concrete properties10.1680/macr.2011.63.8.617 ↗
42. ASTM International · 2020
43. ASTM International · 2020
44. ASTM International · 2018
45. Initial moisture and mixing effects on higher quality recycled coarse aggregate concrete10.1016/j.conbuildmat.2015.01.047 ↗
46. ASTM International · 2019
47. ASTM International · 2020
48. ASTM International · 2020
49. ASTM International · 2014
50. ASTM International · 2017
51. ASTM International · 2021
52. ASTM International · 2017
53. Effect of microstructure of ITZ on compressive strength of concrete prepared with recycled aggregates10.1016/j.conbuildmat.2004.03.005 ↗
54. Influence of silica fume on mechanical and physical properties of recycled aggregate concrete10.1016/j.hbrcj.2014.06.002 ↗
55. Influence of moisture conditioning of recycled aggregates on the properties of fresh and hardened concrete10.1016/j.jclepro.2013.05.009 ↗
56. S. Mindess, J.F. Young, D. Darwin, Concrete, second ed., Prentice Hall, Upper Saddle River, New Jersey, 2003.