Study and predicting the stress-strain characteristics of geopolymer concrete under compression
Source abstract
Abstract
The present investigation is mainly focused on studying the complete stress-strain characteristics of geopolymer concrete (GPC) with different fine aggregate blending. In this study, granite fines (GF) were used as a partial replacement of fine aggregate. Sand and GF were used as fine aggregates blended in different proportions (100:0, 80:20, 60:40 and 40:60) (sand:GF) by weight. GPC cylindrical specimens were tested under compression and the results obtained from the tested data were analyzed to determine the compressive strength (fcm), stress-strain relationship, peak strain (εp), linearity of the stress-strain curve, ultimate strain (εu), various modulus of elasticity (MOE) values, and Poisson’s ratio (μ) of GPC after a period of 7, 28 and 90 days respectively. From the results, it is concluded that the increasing trend was observed in the properties till 40% (60:40) of GF replacement and then these values were decreased. So, optimum fine aggregate was blended at 60:40. Based on the test results, new models were developed for predicting the stress-strain characteristics of GPC under compression by using regression analysis. The results of proposed models were then compared with the experimental values and the predicted equations by various codes and past research.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural mechanics and materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Making concrete greener with fly ash
2. Study on engineering properties of fly ash-based geopolymer concrete
3. Fly ash based geopolymer concrete a new technology towards the greener environment: a review
4. Rangan · 2008
5. Experimental study on geopolymer concrete incorporating GGBS
6. The effect of Si/Al ratio to compressive strength and water absorption of ferronickel slag-based geopolymer
7. Effect of fine aggregate blending on short-term mechanical properties of geopolymer concrete
8. Mechanical properties of geopolymer concrete using granite slurry as sand replacement
9. Effect of plasticizer and superplasticizer on workability of fly ash based geopolymer concrete
10. Effect of elevated temperatures on geopolymer paste, mortar and concrete10.1016/j.cemconres.2009.10.017 ↗
11. Low-calcium fly ash-based geopolymer concrete: reinforced beams and columns, in: curtin Univ
12. ACI 237R · 2007
13. 2006
14. State of the art report on high strength concrete
15. ASTM C39/C39 · 2017
16. A practical equation for elastic modulus of concrete
17. Influence of interfacial transition zone on engineering properties of the concrete manufactured with recycled ceramic aggregate10.3846/13923730.2013.802727 ↗
18. Introducing fly ashbased geopolymer concrete: manufacture and engineering properties
19. Stress-strain behaviour of confined Geopolymer concrete10.1016/j.conbuildmat.2014.09.092 ↗
20. Compressive stress-strain model for low-calcium fly ash-based geopolymer and heat-cured Portland cement concrete10.1016/j.cemconcomp.2016.07.004 ↗
21. Structural design considerations for high strength concrete
22. Mechanical properties and stress-strain relationship in axial compression for concrete with added glazed hollow beads and construction waste10.1016/j.conbuildmat.2014.05.005 ↗
23. Experimental investigation of whole stress-strain curves of coral concrete10.1016/j.conbuildmat.2016.06.064 ↗
24. Stress-strain behavior of freshly compressed concrete under axial compression with a practical equation10.1016/j.conbuildmat.2016.04.045 ↗
25. ASTM E111-04 · 2010
26. IS: 516-91 · 1991
27. I.V. Ramana Reddy, J. Annie Peter, Effect of coarse aggregate blending on short-term mechanical properties of self compacting concrete10.1016/j.matdes.2012.06.063 ↗
28. IS 2386-III · 1963
29. IS 2386-I-63 · 1963
30. Granite powder concrete10.17485/ijst/2010/v3i3.6 ↗
31. Mechanical properties of high performance concrete incorporating granite powder as fine aggregate
32. Relation between density and compressive strength of hardened concrete
33. Influence of concrete age on stress-strain behavior of FRP-confined normal- and high-strength concrete10.1016/j.conbuildmat.2015.02.020 ↗
34. Compressive behavior of steel fiber reinforced recycled coarse aggregate concrete designed with equivalent cubic compressive strength10.1016/j.conbuildmat.2017.02.136 ↗
35. Stress strain relationship of confined and unconfined concrete
36. A stress strain function for concrete subjected to short-term loading10.1680/macr.1962.14.41.85 ↗
37. Discussion of equation for the stress-strain curve of concrete by P. Desayi and S. Krishman
38. Tadros · 1970
39. A numerical approach to the complete stress-strain curve of concrete10.1016/0008-8846(73)90096-3 ↗
40. A. Tomaszewicz, A. Betongens, SINTEF Rep. No. STF 65A84605, Trondheim, (1984).
41. Stress-strain relationship for plain concrete in compression
42. Behavior of hoop confined concrete under high strain rates
43. Strain of concrete at peak compressive stress for a wide range of compressive strengths10.1007/BF02473034 ↗
44. Stress strain relationship of high strength concrete in compression10.1061/(ASCE)0899-1561(1996)8:2(70) ↗
45. Lee · 2002
46. Residual stress-strain relationship for thermal insulation concrete with recycled aggregate after high temperature exposure10.1016/j.conbuildmat.2016.11.006 ↗
47. Australian standard, Concrete Structures, Draft of The AS3600-200x, Standards Australia, 2005.
48. Architectural Institute of Japan, Standard for structural calculation of reinforced concrete structures, Chapter 2, AIJ, 1985.
49. AASHTO LRFD · 2005
50. ENV 1992-1-1 · 2004
51. TS 500 · 2000
52. NZS-3101-95 · 1995
53. CEB-FIP Model Code 90, CEB Bulletin No. 213/214, 1993.
54. ACI 318-00 · 2000
55. ACI 318-08 · 2008
56. CSA-A23. 3 · 2004
57. Beeby · 1995
58. Norwegian Council for Building Standardization, Concrete structures design rules NS 3473 E, Stockholm, 1992.
59. ACI 318-95 · 1995
60. ACI 318-11 · 2011
61. The ratio between static and dynamic modulus of elasticity in normal and high strength concrete
62. A.S. Malaikah, A proposed relationship for the modulus of elasticity of high strength concrete using local materials in riyadh, Riyadh, Saudi Arabia, n.d.
63. Compressive strength and modulus of elasticity of freshly compressed concrete10.1016/j.conbuildmat.2012.02.055 ↗
64. Elastic deformation of concrete. Determination of secant modulus of elasticity in compression, Acta Technica Napocensis
65. Modulus of elasticity of low strength concrete
66. Evaluation of static modulus of elasticity depending on concrete compressive strength, World Acad
67. Behaviour and assessment of foamed concrete for construction applications
68. Direct tension test and tensile strain capacity of concrete at early age10.1016/S0008-8846(03)00231-X ↗
69. Effect of sedimentary and metamorphic aggregate on static modulus of elasticity of high-strength concrete
70. Stress-strain behavior of freshly compressed concrete under axial compression with a practical equation10.1016/j.conbuildmat.2016.04.045 ↗
71. 456-2000 · 2000
72. Bond performance of reinforcing bars in inorganic polymer concrete (IPC)10.1007/s10853-006-0534-5 ↗