Setting, bleeding, and hardening strength properties of coarse aggregate backfill slurry
Source abstract
Abstract
This work systematically investigates the effects of coarse aggregate (CA) type, dosage, and slurry concentration on the backfill slurry's setting, bleeding, and hardening strength properties. Rod milling sand (RMS) and waste rock (WR) were selected as CA, the backfill slurry's concentration ranged from 76% to 79%, its replacement rate of tailings with RMS and WR was between 40% and 60%, and its cure period was 3, 14 and 28 days. Then, the fresh backfill slurry was subject to setting and bleeding experiments, and the hardened backfill slurry was submitted to UCS tests. Finally, a CPB curing time of 28 days was chosen for microstructure experiments to reveal the mechanism of the effect of slurry concentration and CA dosage on CPB hardened strength. The results showed that the initial and final setting times reduce as concentration increases and increase as tailings/CA (T/CA) decreases. The effect of concentration and CA dosage on the bleeding properties of backfill slurry is not apparent. Increasing the slurry concentration increases the amount of C-S-H gel inside the CPB, which improves its mechanical behavior. The CPB has optimal physical properties when the slurry concentration is 77%− 78%, and the amount of WR is 50%. The study results can provide a theoretical basis for the preferential selection of backfill materials in mines.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tailings Management and Properties · Rock Mechanics and Modeling · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. A systematic review of paste technology in metal mines for cleaner production in China10.1016/j.jclepro.2019.119590 ↗
2. Determination of utilization strategies for hemihydrate phosphogypsum in cemented paste backfill: Used as cementitious material or aggregate10.1016/j.jenvman.2022.114687 ↗
3. Feasibility study and performance optimization of sand-based cemented paste backfill materials10.1016/j.jclepro.2020.120798 ↗
4. Cemented paste backfill for mineral tailings management: Review and future perspectives10.1016/j.mineng.2019.106025 ↗
5. A new procedure for recycling waste tailings as cemented paste backfill to underground stopes and open pits10.1016/j.jclepro.2018.04.041 ↗
6. Study on the nonlinear deformation characteristics and constitutive model of cemented tailings backfill considering compaction hardening and strain softening10.1016/j.jmrt.2022.06.174 ↗
7. Analytical and experimental investigation of the relationship between spread and yield stress in the mini-cone test for cemented tailings backfill10.1016/j.conbuildmat.2020.119770 ↗
8. Novel testing method for thixotropy of paste slurry with respect to influencing factors and rheological parameters10.1016/j.apt.2021.10.031 ↗
9. Characterization of early age behavior of cemented paste backfill through the magnitude and frequency spectrum of ultrasonic P-wave10.1016/j.conbuildmat.2020.118733 ↗
10. Preparation and microstructure of fly ash geopolymer paste backfill material10.1016/j.jclepro.2019.03.310 ↗
11. A light barricade for tailings recycling as cemented paste backfill10.1016/j.jclepro.2019.119388 ↗
12. Study on hydration reaction and structure evolution of cemented paste backfill in early-age based on resistivity and hydration heat10.1016/j.conbuildmat.2020.121827 ↗
13. Improved strength prediction of cemented paste backfill using a novel model based on adaptive neuro fuzzy inference system and artificial bee colony10.1016/j.conbuildmat.2021.122857 ↗
14. Coupled electromagnetic heat transfer model for cemented tailings backfill cured by microwave energy10.1016/j.conbuildmat.2022.128014 ↗
15. The rheological, mechanical and heavy metal leaching properties of cemented paste backfill under the influence of anionic polyacrylamide10.1016/j.chemosphere.2021.131630 ↗
16. Pressure drops of fresh cemented paste backfills through coupled test loop experiments and machine learning techniques10.1016/j.powtec.2019.11.046 ↗
17. Mechanical properties and microstructure of layered cemented paste backfill under triaxial cyclic loading and unloading10.1016/j.conbuildmat.2020.119540 ↗
18. Synergistic deformation in a combination of cemented paste backfill and rocks10.1016/j.conbuildmat.2021.125943 ↗
19. Effects of chloride on the early mechanical properties and microstructure of gangue-cemented paste backfill10.1016/j.conbuildmat.2019.117504 ↗
20. Real-time observation of meso-fracture process in backfill body during mine subsidence using X-ray CT under uniaxial compressive conditions10.1016/j.conbuildmat.2016.03.050 ↗
21. Specimen size effect on strength behavior of cemented paste backfills subjected to different placement conditions10.1016/j.enggeo.2014.11.015 ↗
22. Experimental investigation on strength and failure characteristics of cemented paste backfill-rock composite under uniaxial compression10.1016/j.conbuildmat.2021.124629 ↗
23. CT scanning of internal crack mechanism and strength behavior of cement-fiber-tailings matrix composites10.1016/j.cemconcomp.2020.103865 ↗
24. Analysis of internal structure behavior of fiber reinforced cement-tailings matrix composites through X-ray computed tomography10.1016/j.compositesb.2019.107091 ↗
25. A joint experiment and discussion for strength characteristics of cemented paste backfill considering curing conditions10.3390/min12020211 ↗
26. Rheological behavior of ultrafine-tailings cemented paste backfill in high-temperature mining conditions10.1016/j.conbuildmat.2020.119212 ↗
27. Physico-chemical and micro-structural behavior of cemented mine backfill: Effect of pH in dam tailings10.1016/j.jenvman.2022.115034 ↗
28. Bearing mechanism and stability monitoring of cemented gangue-fly ash backfill column with stirrups in partial backfill engineering10.1016/j.engstruct.2019.03.061 ↗
29. Influence rule of early compressive strength and solidification mechanism of full tailings paste with coarse aggregate
30. Coupled effects of curing stress and curing temperature on mechanical and physical properties of cemented paste backfill10.1016/j.conbuildmat.2020.121746 ↗
31. Study on proportioning experiment and performance of solid waste for underground backfilling
32. The carbon uptake and mechanical property of cemented paste backfill carbonation curing for low concentration of CO2
33. Aggregate gradation effects on dilatancy behavior and acoustic characteristic of cemented rockfill10.1016/j.ultras.2018.09.008 ↗
34. Experimental investigation of mechanical, hydration, microstructure and electrical properties of cemented paste backfill10.1016/j.conbuildmat.2020.120137 ↗
35. Mechanical behavior, failure pattern and damage evolution of fiber-reinforced cemented sulfur tailings backfill under uniaxial loading10.1016/j.conbuildmat.2022.127248 ↗
36. Study of localized deformation in geopolymer cemented coal gangue-fly ash backfill based on the digital speckle correlation method10.1016/j.conbuildmat.2019.04.208 ↗
37. Effects of coupled sulphate and temperature on internal strain and strength evolution of cemented paste backfill at early age10.1016/j.conbuildmat.2019.116937 ↗
38. Effects of red mud additions on gangue-cemented paste backfill properties10.1016/j.powtec.2020.03.055 ↗
39. Fracture evolution of fiber-reinforced backfill based on acoustic emission fractal dimension and b-value10.1016/j.cemconcomp.2022.104739 ↗
40. Utilization of modified copper slag activated by Na2SO4 and CaO for unclassified lead/zinc mine tailings based cemented paste backfill10.1016/j.jenvman.2021.112608 ↗
41. Time-dependent rheological and mechanical properties of silica fume modified cemented tailings backfill in low temperature environment10.1016/j.cemconcomp.2020.103804 ↗
42. Synthesis, processing, characterization, and applications of red mud/carbon nanotube composites10.1016/j.ceramint.2016.07.146 ↗
43. Fiber type effect on strength, toughness and microstructure of early age cemented tailings backfill10.1016/j.conbuildmat.2019.06.221 ↗
44. Investigation of failure mechanism of cement-fiber-tailings matrix composites using digital image correlation and acoustic emission10.1016/j.conbuildmat.2022.127513 ↗
45. Reinforcement effect of polypropylene fiber on dynamic properties of cemented tailings backfill under SHPB impact loading10.1016/j.conbuildmat.2021.122417 ↗
46. Effect of fly-ash as fine aggregate on the workability and mechanical properties of cemented paste backfill
47. Effect of velocity on flow properties and electrical resistivity of cemented coal gangue-fly ash backfill (CGFB) slurry in the pipeline10.1016/j.powtec.2021.10.050 ↗
48. Effect of superplasticizer type and dosage on fluidity and strength behavior of cemented tailings backfill with different solid contents10.1016/j.conbuildmat.2018.07.155 ↗
49. Rheological properties and calculation models of coarse aggregate paste with polypropylene fiber
50. Study on early mechanical properties and damage constitutive model of tailing-cemented backfill with different fibers
51. Mechanical, flowing and microstructural properties of cemented sulfur tailings backfill: effects of fiber lengths and dosage10.1016/j.conbuildmat.2021.125058 ↗
52. rheological properties of coarse aggregate at low temperature and its regression models
53. Long term leaching behavior of arsenic from cemented paste backfill made of construction and demolition waste: Experimental and numerical simulation studies10.1016/j.jhazmat.2021.125813 ↗
54. Rheological and mechanical properties of cemented foam backfill: effect of mineral admixture type and dosage10.1016/j.cemconcomp.2020.103689 ↗
55. Creep properties of geopolymer cemented coal gangue-fly ash backfill under dynamic disturbance10.1016/j.conbuildmat.2018.10.055 ↗
56. Strength prediction based on ultrasonic property of fractal gangue cemented rockfill reinforced by carbon nanotubes10.1016/j.conbuildmat.2021.124444 ↗
57. Experimental investigation on the deformation and strength properties of cemented gangue backfill column under long-term axial compression10.1016/j.istruc.2022.07.068 ↗
58. Control of waste rock-tailings paste backfill for active mining subsidence areas10.1016/j.jclepro.2017.09.253 ↗
59. Utilization of steel slag for cemented tailings backfill: Hydration, strength, pore structure, and cost analysis
60. Optimization of the effect and formulation of different coarse aggregates on performance of the paste backfill condensation
61. Effect of lime on properties of filling cementitious material prepared by hemihydrate phosphogypsum
62. Preparation and properties of modified coal gasification slag-based filling materials for mines
63. Curing performance of alkali-activated cement–phosphorous slag and its compatibility with sulfur tailings
64. Regulation of mechanical damage of filling body with sulfur based on coagulation and retarding technology
65. Experimental research on a superhigh-water packing material for mining and its micromorphology
66. Impact of gypsum type on the setting and hardening performance and mechanism of water-rich filling materials
67. Effect of raw material ratio on properties of foam paste backfilling materials
68. Pore and strength characteristics of cemented paste backfill using sulphide tailings: Effect of sulphur content10.1016/j.conbuildmat.2019.117452 ↗
69. Experimental research on grouting material with large volume fly ash
70. GB/T1346–2001. (2001). Test methods for water requirement of normal consistency, setting time and soundness of the portland cements. China Cement Standardization Technical Committee. Beijing.
71. Temperature-dependent water retention and bleeding of fresh cement-based materials with VEAs10.1016/j.cemconcomp.2022.104539 ↗
72. Effect of tailings fineness on flow, strength, ultrasonic and microstructure characteristics of cemented paste backfill10.1016/j.conbuildmat.2020.120645 ↗
73. Numerical study on the pipe flow characteristics of the cemented paste backfill slurry considering hydration effects10.1016/j.powtec.2018.11.070 ↗
74. Effects of chlorides on setting time, hydration heat and hydration products of fresh slurry of cemented paste backfill
75. A preliminary study of aeolian sand-cement-modified gasification slag-paste backfill: fluidity, microstructure, and leaching risks10.1016/j.scitotenv.2022.154766 ↗
76. Tuylu, S., Bascetin, A., Adiguzel, D. (2018). Laboratory Studies to Examine the Effects of Adding Cement to Various Layers of a Surface Paste Tailings Storage. In Symposium on Environmental Issues and Waste Management in Energy and Mineral Production (pp. 169–180). 〈https://doi.org/10.1007/978–3-319–99903-6_15〉.10.1007/978-3-319-99903-6_15 ↗