Study on photocatalytic and mechanical properties of TiO2 modified pervious concrete
Source abstract
Abstract
Photocatalytic pervious concrete pavement is a potential and sustainable new method for treating urban air and water pollution, and there is now an increasing amount of research on TiO2 pervious concrete due to its excellent photocatalytic properties. In this study, pervious concrete with varying nano-TiO2 contents (0 %, 1 %, 2 %, 5 %, 8 %) was prepared and evaluated for its performance in purifying methyl orange (MO). The results show that as the TiO2 content increased from 0 % to 8 %, the photocatalytic degradation efficiency increased and then decreased, with the highest MO degradation rate of pervious concrete with 5 % TiO2 content was 42.8 % at 120 min. However, as the TiO2 content increases, the compressive strength and TiO2 utilization rate of pervious concrete gradually decrease, and the 28-day compressive strength decreases from 26.0 MPa to 13.5 MPa. Therefore, 2 % TiO2 content was determined to be optimal for pervious concrete.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Urban Stormwater Management Solutions · Smart Materials for Construction · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. A contribution of nanoscale particles of road-deposited sediments to the pollution of urban runoff by heavy metals10.1016/j.chemosphere.2018.06.150 ↗
2. The pollution conveyed by urban runoff: a review of sources10.1016/j.scitotenv.2019.136125 ↗
3. Ecological risk of nonylphenol in China surface waters based on reproductive fitness10.1021/es403781z ↗
4. Sound absorption performance of modified concrete: a review
5. A review on the development of cool pavements to mitigate urban heat island effect10.1016/j.rser.2015.07.177 ↗
6. The biosorption of mercury by permeable pavement biofilms in stormwater attenuation10.1016/j.scitotenv.2020.140411 ↗
7. A review of sustainable pervious concrete systems: emphasis on clogging, material characterization, and environmental aspects
8. A study on the seawater purification characteristics of water-permeable concrete using recycled aggregate10.1016/j.resconrec.2009.11.006 ↗
9. Numerical study on pore clogging mechanism in pervious pavements10.1016/j.jhydrol.2018.08.072 ↗
10. Permeability measurement and scan imaging to assess clogging of pervious concrete pavements in parking lots10.1016/j.jenvman.2011.09.021 ↗
11. Photoelectrochemical properties of TiO2 photocatalyst and its applications for environmental purification10.1016/j.jphotochemrev.2012.07.001 ↗
12. Photocatalytic concrete for NOx degradation: influence factors and durability10.1016/j.conbuildmat.2021.123835 ↗
13. Recent advances in photocatalytic removal of organic and inorganic pollutants in air10.1016/j.jclepro.2020.123895 ↗
14. Influence of dispersants and dispersion on properties of nanosilica modified cement-based materials10.1016/j.cemconcomp.2021.103969 ↗
15. Development of photocatalytic pervious concrete pavement for air and storm water improvements10.3141/2290-21 ↗
16. Photocatalytic NO x degradation of concrete surface layers intermixed and spray-coated with nano-TiO 2: influence of experimental factors10.1016/j.cemconcomp.2017.07.022 ↗
17. Photocatalytic concrete for NOx abatement: Supported TiO2 efficiencies and impacts10.1016/j.cemconres.2018.11.002 ↗
18. Studying the mix design and investigating the photocatalytic performance of pervious concrete containing TiO2-Soaked recycled aggregates10.1016/j.jclepro.2019.119281 ↗
19. Pervious concrete with titanium dioxide as a photocatalyst compound for a greener urban road environment10.1016/j.conbuildmat.2012.04.097 ↗
20. Automobile exhaust removal performance of pervious concrete with nano TiO2 under photocatalysis10.3390/nano10102088 ↗
21. Removal effect on stormwater runoff pollution of porous concrete treated with nanometer titanium dioxide10.1016/j.trd.2019.06.001 ↗
22. , Purification effect on runoff pollution of porous concrete with Nana-TiO2 photocatalytic coating
23. Comparison of the mechanical property and microstructures of cementitious composites with nano-and micro-rutile phase TiO210.1016/j.acme.2019.02.002 ↗
24. Effect of nano-TiO2 on the mechanical properties of cement mortar10.1016/j.conbuildmat.2011.10.047 ↗
25. Pervious concrete mixture optimization, physical, and mechanical properties and pavement design: a review10.1016/j.jclepro.2020.125095 ↗
26. Incorporation of titanium dioxide nanoparticles in mortars — influence of microstructure in the hardened state properties and photocatalytic activity10.1016/j.cemconres.2012.09.007 ↗
27. Experimental study on the water purification performance of biochar-modified pervious concrete10.1016/j.conbuildmat.2021.122767 ↗
28. Water purification characteristics of pervious concrete fabricated with CSA cement and bottom ash aggregates10.1016/j.conbuildmat.2017.01.020 ↗
29. Influence of mixing methods on the NOx reduction capability and electrical properties of photocatalytic cementitious systems10.1016/j.cemconcomp.2020.103840 ↗
30. Photoinduced reactivity of titanium dioxide10.1016/j.progsolidstchem.2004.08.001 ↗
31. Influence of TiO2 nanoparticles on early C3S hydration10.1111/j.1551-2916.2010.03868.x ↗
32. The effect of TiO2 nanoparticles on water permeability and thermal and mechanical properties of high strength self-compacting concrete10.1016/j.msea.2010.09.074 ↗
33. Contribution of core/shell TiO2@SiO2 nanoparticles to the hydration of Portland cement10.1016/j.conbuildmat.2019.117127 ↗
34. Influence of nano-TiO2 on physical and hydration characteristics of fly ash-cement systems10.1016/j.conbuildmat.2016.02.087 ↗