journal article·2022-12Open access

Evaluating the storage stability of SBR-modified asphalt binder containing polyphosphoric acid (PPA)

Yajin Han, Jiahao Tian, Jitong Ding, Liheng Shu, Fujian Ni

Abstract

The poor storage stability of polymer-modified asphalt (PMA) binder hinders its applications. Traditionally, the softening point test is utilized to evaluate the storage stability, which shows less sensitivity compared with the rheological test. This study attempts to evaluate the effects of polyphosphoric acid (PPA) contents on the storage stability of SBR-modified asphalt binder from empirical, rheological, and molecular aspects. Specifically, the softening point and multiple stress creep recovery (MSCR) test were adopted to assess the phase separation of SBR&PPA-modified asphalt binder. On this basis, the Gel permeation chromatography (GPC) test was used to understand the molecular weight transformation and therefore evaluate the sensitivities of the two tests in revealing the storage stability of PMA. According to the results, 2% PPA is capable to enhance the asphalt binder softening point from 60 ℃ to about 85 ℃. Similarly, the increased PPA contents could also decrease the non-recoverable compliance. When the PPA contents increase from 0% to 2%, the large molecular size proportions climb from 13.5% to about 16%. In addition, PPA with suitable content could enhance the storage stability of the SBR-modified asphalt binder. Yet the softening point difference of asphalt binder containing 1% PPA is merely 0.5 ℃ and reveals the least phase separation according to softening point results, which is contradictory to the best PPA dosage of 0.5% shown in the MSCR and GPC tests. Furthermore, the MSCR test shows better correlations with the GPC test with a correlation coefficient of 0.82. Combining the storage stability and ductility results, the 0.5% PPA content is potential to decrease the phase separation of SBR-modified asphalt binder without substantially weakening the low-temperature performance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Y. Becker, M.P. Mendez, Y. Rodriguez, Polymer modified asphalt, Vision tecnologica, Citeseer, 2001.
2. Effect of cohesive and adhesive parameters on the moisture resistance of thin friction course (TFC) with varying mix design parameters10.1016/j.conbuildmat.2020.119420 ↗
3. Review of warm mix rubberized asphalt concrete: towards a sustainable paving technology10.1016/j.jclepro.2017.12.245 ↗
4. Effects of design parameters and moisture conditions on interface bond strength between thin friction course (TFC) and underlying asphalt pavements10.1016/j.conbuildmat.2020.121347 ↗
5. Rossi, Bitumen and bitumen modification: a review on latest advances10.3390/app9040742 ↗
6. Relation between polymer architecture and nonlinear viscoelastic behavior of modified asphalts10.1016/j.cocis.2006.09.001 ↗
7. Polymer modified asphalt emulsion
8. Polymer modified asphalt binders10.1016/j.conbuildmat.2005.07.007 ↗
9. The role of thermodynamics and kinetics in rubber–bitumen systems: a theoretical overview10.1080/10298436.2020.1724289 ↗
10. Influence of aging on thermal behavior and characterization of SBR compound-modified asphalt10.1007/s10973-013-3338-2 ↗
11. Evaluating the thermal aging-induced raveling potential of thin friction course (TFC)10.1016/j.conbuildmat.2021.126160 ↗
12. Evaluating the effects of styrene-butadiene rubber (SBR) and polyphosphoric acid (PPA) on asphalt adhesion performance10.1016/j.conbuildmat.2021.126028 ↗
13. The research for high-performance SBR compound modified asphalt10.1016/j.conbuildmat.2009.10.003 ↗
14. Investigation of the raveling potential of thin friction course (TFC) under freeze–thaw conditions10.1617/s11527-021-01627-8 ↗
15. Thermo-rheological behavior and compatibility of modified asphalt with various styrene–butadiene structures in SBS copolymers10.1016/j.matdes.2015.09.002 ↗
16. Morphology, rheology, and physical properties of polymer-modified asphalt binders10.1016/j.eurpolymj.2018.10.049 ↗
17. Use of rheological compatibility criteria to study SBS modified asphalts10.1002/app.12764 ↗
18. Evaluation of the improved properties of SBR/weathered coal modified bitumen containing carbon black10.1016/j.conbuildmat.2008.12.020 ↗
19. The effect of styrene–butadiene–rubber/montmorillonite modification on the characteristics and properties of asphalt10.1016/j.conbuildmat.2009.06.011 ↗
20. Brief review of the chemistry of polyphosphoric acid (PPA) and bitumen10.1021/ef800120x ↗
21. Improving thermo-rheological behavior and compatibility of SBR modified asphalt by addition of polyphosphoric acid (PPA)10.1016/j.conbuildmat.2017.02.065 ↗
22. Production of stable polypropylene-modified bitumens10.1016/0016-2361(95)00312-6 ↗
23. Experimental characterization of storage stability of crumb rubber modified bitumen with warm-mix additives10.1016/j.conbuildmat.2020.118840 ↗
24. Rheological behavior and its chemical interpretation of crumb rubber modified asphalt containing warm-mix additives10.1177/0361198118781376 ↗
25. Standard test methods of bitumen and bituminous mixtures for highway engineering: JTG E20–2011, 2011.
26. Revision of the superpave high temperature binder specification: the multiple stress creep recovery test (with discussion)
27. A new performance related test method for rutting prediction: MSCRT
28. The relationship of the MSCR test to rutting10.1080/14680629.2009.9690236 ↗
29. H. Wang, X. Liu, H. Zhang, P. Apostolidis, T. Scarpas, S. Erkens, Asphalt-rubber interaction and performance evaluation of rubberised asphalt binders containing non-foaming warm-mix additives, Road Materials and Pavement Design 21(6) (2020) 1612–1633.10.1080/14680629.2018.1561380 ↗
30. Investigating the high-and low-temperature performance of warm crumb rubber–modified bituminous binders using rheological tests
31. Molecular weight-sensitive detectors for size exclusion chromatography, handbook of size exclusion chromatography and related
32. Size exclusion chromatography10.1021/ac00084a022 ↗
33. Application of gel permeation chromatography technology in asphalt materials: a review10.1016/j.conbuildmat.2021.122386 ↗
34. Estimation of RAP’s binder viscosity using GPC without binder recovery10.1061/(ASCE)0899-1561(2006)18:4(561) ↗
35. Aging mechanism and effective recycling ratio of SBS modified asphalt10.1016/j.conbuildmat.2014.07.064 ↗
36. The use of toluene as a carrier solvent for gel permeation chromatography analyses of asphalt10.1080/01483918808068342 ↗
37. Rheological property of polyphosphoric acid modified asphalt
38. Shifting the bitumen structure from sol to gel10.1016/S0920-4105(98)00052-7 ↗
39. Evaluation of polyphosphoric acid on the performance of polymer modified asphalt binders10.1002/app.48984 ↗
40. Influence of polyphosphoric acid (PPA) on properties of crumb rubber (CR) modified asphalt10.1016/j.conbuildmat.2019.117094 ↗
41. Effect of laboratory aging on chemistry and rheology of crumb rubber modified bitumen10.1617/s11527-020-1451-9 ↗
42. AASHTO MP 19–10 Standard specification for performance graded asphalt binder using multiple stress creep recovery (MSCR) test.
43. High temperature performance evaluation and grading of SBS modified asphalt based on multiple stress creep recovery test10.1016/j.conbuildmat.2016.02.170 ↗