journal article·2024-07Open access

Short- and long-term experimental performance of concrete with copper slag: Mechanical and physical properties assessment

Yimmy Fernando Silva, Claudia Burbano-Garcia, Gerardo Araya-Letelier, Marcelo González

Abstract

Industrial waste management has increased in recent years and, at the same time, the production of more sustainable and high-performance concrete has become one of the most important challenges related to the built environment. To contribute to face the previously mentioned challenges, this paper presents an experimental study on the influence of copper slag (CS) as a supplementary cementitious material (SCM) on the physical and mechanical concrete performance at both short- and long-terms. The CS was incorporated to concrete using five increasing levels (0%, 10%, 20%, 30% and 50% vol.) as SCM and both fresh state (slump) and hardened state (compressive strength, indirect tensile strength, flexural strength, porosity and capillary suction) properties of concretes were evaluated. The results showed that the highest slump was achieved by the concrete mixture with 50% CS, reaching a 27% increment compared to the reference concrete (0% CS). In the hardened state, both average compressive and splitting tensile strength values monotonically decreased with increasing CS content at short ages (28 days). However, at 360 days, the 10% SC concrete mixture presented average compressive and splitting tensile strengths of 57 MPa and 4.9 MPa, respectively, reaching and exceeding the corresponding strength values of the reference concrete, respectively. In addition, the mixture with 10% CS obtained the highest average flexural strength, reaching a 3.2% and 3.5% increment compared to the reference mixture at 28 and 360 days, respectively, which might be attributed to the more angular shape of the CS particles compared to the cement particles. In terms of physical properties, voids and absorption values increased as the CS content increased, yet at 360 days of curing, the only concrete that presented higher values than the reference concrete was the mixture with 50% CS (increments of 5.6% and 5.4% for voids and absorption, respectively). In conclusion, this study showed the advantageous potential use of CS as SCM at low percentages (between 10 and 20%), especially in long term performance of concrete mixtures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (80)

Show source-provided references
1. Use of supplementary cementitious materials in seawater–sea sand concrete: State-of-the-art review
2. Using machine learning techniques for predicting autogenous shrinkage of concrete incorporating superabsorbent polymers and supplementary cementitious materials
3. Palm oil fuel ash as a sustainable supplementary cementitious material for concrete: A state-of-the-art review
4. A study of some relevant properties of concrete incorporating waste ceramic powder as a cement replacement agent
5. Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry10.1016/j.cemconres.2018.03.015 ↗
6. Performance of self-compacting concrete with residue of masonry and recycled aggregate under sulfate attack10.1061/JMCEE7.MTENG-15741 ↗
7. Durability of concrete exposed to combined freeze-thaw, sulfate, and acid attacks after two years
8. Recycled cement production energy consumption optimization
9. A comprehensive review on the use of sugarcane bagasse ash as a supplementary cementitious material to produce eco-friendly concretes10.1016/j.matpr.2022.03.264 ↗
10. Selection of a CO2capture technology for the cement industry: An integrated TEA and LCA methodological framework
11. Concrete incorporating supplementary cementitious materials: temporal evolution of compressive strength and environmental life cycle assessment10.1016/j.heliyon.2024.e25056 ↗
12. Sustainability framework of recycled aggregate concrete produced with supplementary cementitious materials
13. Supplementary cementitious materials based on recycled concrete paste
14. Production of lightweight cementless binders using supplementary cementitious materials to replace autoclaved aerated concrete blocks
15. Calcined marls as compound of binary binder system: Preliminary study10.1016/j.matpr.2022.01.043 ↗
16. Natural resources volatility, renewable energy, R&D resources and environment: Evidence from selected developed countries
17. Data-driven optimization tool for the functional, economic, and environmental properties of blended cement concrete using supplementary cementitious materials10.1016/j.jobe.2023.106022 ↗
18. Performance of recycled aggregate concrete with supplementary cementitious materials (fly ash, GBFS, silica fume, and metakaolin): Mechanical properties, pore structure, and water absorption
19. Possibilities for the application of agro-industrial wastes in cementitious materials: a brief review of the Brazilian perspective
20. Ultra-high-performance concrete properties containing rice straw ash and nano eggshell powder
21. Using a combination of industrial and agricultural wastes to manufacture sustainable ultra-high-performance concrete
22. Effect of utilizing peanut husk ash on the properties of ultra-high strength concrete
23. Characterizations and potential recovery pathways of phosphate mines waste rocks
24. Elaboration of a blended binder based on marls from phosphate mines waste rocks
25. Binary blended cement pastes and concrete using gravel wash mud (GWM) powders10.1016/j.conbuildmat.2021.124225 ↗
26. Performance of fly ash-blended Portland cement concrete developed by using fine or coarse recycled concrete aggregate
27. Thermally activated drinking water treatment sludge as a supplementary cementitious material: properties, pozzolanic activity and hydration characteristics
28. Influence of in-situ casting temperature and curing regime on the properties of blended cement concretes under hot climatic conditions10.1016/j.conbuildmat.2020.121865 ↗
29. Fly ash for sustainable construction: A review of fly ash concrete and its beneficial use case studies
30. Hydration superposition effect and mechanism of steel slag powder and granulated blast furnace slag powder
31. Multi-scale study on synergistic effect of cement replacement by metakaolin and typical supplementary cementitious materials on properties of ultra-high performance concrete
32. Thermal conductivity of cement paste containing waste glass powder, metakaolin and limestone filler as supplementary cementitious material10.1016/j.jclepro.2020.125018 ↗
33. Effect of metakaolin on the fresh and hardened properties of 3D printed cementitious composite
34. Combined effects of supplementary cementitious materials (silica fume, GGBS, fly ash and rice husk ash) and steel fiber on the hardened properties of recycled aggregate concrete
35. Long-term stable and sustainable high-strength engineered cementitious composite incorporating limestone powder10.1016/j.istruc.2022.10.008 ↗
36. Utilization of millet husk ash as a supplementary cementitious material in eco-friendly concrete: RSM modelling and optimization10.1016/j.istruc.2023.02.015 ↗
37. Reuse of copper slag as a supplementary cementitious material: reactivity and safety
38. Copper slag: The leaching behavior of heavy metals and its applicability as a supplementary cementitious material10.1016/j.jece.2021.105132 ↗
39. Development of Alkali-activated Cementitious Material using Copper Slag10.1016/j.conbuildmat.2019.03.233 ↗
40. Value-added utilization of copper slag to enhance the performance of magnesium potassium phosphate cement
41. Mechanical properties of concrete with Sarcheshmeh mineral complex copper slag as a part of cementitious materials10.1016/j.conbuildmat.2016.12.024 ↗
42. Sustainable use of copper slag in self compacting concrete containing supplementary cementitious materials10.1016/j.jclepro.2017.03.031 ↗
43. Leaching behaviour of copper slag, construction and demolition waste and crushed rock used in a full-scale road construction10.1016/j.jenvman.2017.09.032 ↗
44. Assessing the applicability of fine copper slag in road and structural fill application10.1016/j.matpr.2022.01.058 ↗
45. Effect of copper slag addition on mechanical behavior of asphalt mixes containing reclaimed asphalt pavement10.1016/j.conbuildmat.2016.05.081 ↗
46. Strength and durability studies on slag cement concrete made with copper slag as fine aggregates10.1016/j.matpr.2020.08.232 ↗
47. A review on the influence of copper slag as a natural fine aggregate replacement on the mechanical properties of concrete10.1016/j.matpr.2022.04.414 ↗
48. Mechanical properties of high-strength concrete incorporating copper slag as coarse aggregate10.1016/j.conbuildmat.2008.12.005 ↗
49. Environmental protection by using waste copper slag as a coarse aggregate in self-compacting concrete
50. Valorization of secondary copper slag as aggregate and cement replacement in ultra-high performance concrete
51. Properties of concrete containing copper slag waste10.1680/macr.2011.63.8.605 ↗
52. ASTM C150, Standard Specification for Portland Cement. ASTM International, West Conshohocken, PA, 2022, pp. 1–9. doi: 10.1520/C0150.10.1520/C0150 ↗
53. Chemical composition data of the main stages of copper production from sulfide minerals in chile: a review to assist circular economy studies10.3390/min12020250 ↗
54. Assessment of the viability of pozzolanic activity of copper slag for use as supplementary cementitious material in ordinary Portland cement
55. ASTM C494, ASTM C494/C494M − 19 Standard Specification for Chemical Admixtures for Concrete, ASTM International, West Conshohocken, PA, 2019. doi: 10.1520/C0494_C0494M–19E01.10.1520/C0494_C0494M-19E01 ↗
56. ACI PRC-211.1-22, Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete. 2022.
57. ASTM C143/C143M, Standard Test Method for Slump of Hydraulic-Cement Concrete. ASTM International, West Conshohocken, PA, 2020, pp. 1–10. doi: 10.1520/C0143.
58. ASTM C39, ASTM C39/39M. Standard test method for compressive strength of cylindrical concrete specimens. ASTM International, West Conshohocken, PA, 2018. doi: 10.1520/C0039_C0039M-21.10.1520/C0039_C0039M-21 ↗
59. ASTM C496/C496M − 17, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens. ASTM International, West Conshohocken, PA., 2017, pp. 1–5. doi: 10.1520/mnl10881m.10.1520/MNL10881M ↗
60. ASTM C293, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading). ASTM International, West Conshohocken, PA., 2016, pp. 1–4. doi: 10.1520/C0293.10.1520/C0293 ↗
61. ASTM C642, ASTM C642. Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, 2021. doi: 10.1520/C0642-21.10.1520/C0642-21 ↗
62. ASTM C1585-20, Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic Cement Concretes. ASTM International, West Conshohocken, PA., 2020, pp. 1–6. doi: 10.1520/C1585-20.2.
63. Using volcanic pumice dust to produce high-strength self-curing concrete in hot weather regions
64. Cement and Concrete Research Retardation effect of the pozzolanic reaction of low-calcium supplementary cementitious materials on clinker hydration at later age: Effects of pore solution, foreign ions, and pH
65. Effect of calcined clay and marble dust powder as cementitious material on the mechanical properties and embodied carbon of high strength concrete by using RSM-based modelling10.1016/j.heliyon.2023.e15029 ↗
66. Mechanical, microstructural characteristics and sustainability analysis of concrete incorporating date palm ash and eggshell powder as ternary blends cementitious materials
67. Effect of masonry residue on the hydration of portland cement paste10.15446/dyna.v86n209.77286 ↗
68. Synergistic effects of supplementary cementitious materials and compressive strength prediction of concrete using machine learning algorithms with SHAP and PDP analyses
69. Influence of copper slag as supplementary cementitious material in mortar
70. Enhancing durability of concrete mixtures with supplementary cementitious materials: a study on organic acid corrosion and physical abrasion in pig farm environments
71. Synthesis and characterization of ladle furnace slag on the mechanical properties of self-compacting concrete10.1016/j.matpr.2022.10.265 ↗
72. Effect of waste copper slag as a substitute in cement and concrete-a review10.1088/1755-1315/982/1/012029 ↗
73. Use of copper mine tailing in concrete: strength characteristics and durability performance10.1007/s10163-019-00831-7 ↗
74. Copper slag waste as a supplementary cementing material to concrete10.1007/s10853-006-0997-4 ↗
75. Utilization of ultra-fine copper slag to prepare eco-friendly ultrahigh performance concrete by replacing silica fume
76. Use of copper slag microparticles in self-consolidating concrete
77. Durability and transport properties of SCC incorporating dredged sediments10.1016/j.conbuildmat.2021.123116 ↗
78. Potential of ladle furnace slag as supplementary cementitious material in concrete
79. M. Al-Jabari, 2. Concrete porosity and transport processes. Integral Waterproofing of Concrete Structures: Advanced Protection Technologies of Concrete by Pore Blocking and Lining. 2022. doi: 10.1016/B978-0-12-824354-1.00002-7.10.1016/B978-0-12-824354-1.00002-7 ↗
80. The influence of curing regimes on hydration, microstructure and compressive strength of ultra-high performance concrete: a review