Effect of processed sugarcane bagasse ash on compressive strength of blended mortar and assessments using statistical modelling

There is much agriculture and non-agricultural waste that contains pozzolanic material, which can be recommended to use as a partial replacement for Ordinary Portland Cement (OPC). One of the waste products from sugar industries, which possess pozzolanic properties, is Sugar Cane Bagasse Ash (SCBA). Because of the negative impact associated with cement production, OPC is being replaced by several supplementary cementitious materials / pozzolanic materials. In the current study, an effort has been made to use the SCBA by partially replacing the OPC for mortar studies. SCBA has been processed to enhance the chemical and physical properties. OPC is partially replaced by Processed Sugar Cane Bagasse Ash (PSCBA) up to 30% by a 5% increment. PSCBA blended cement mortar contains different proportions of PSCBA blended cement: river sand as 1:3, 1:4, and 1:5 with different water-to-binder (W/B) ratios based on the flow studies. Experimental research was done to determine the effects of the W/B ratio, river sand, and PSCBA on the formation of the cube compressive strength of PSCBA blended cement mortar for curing times of 7, 14, 28, 56, and 112 days. An increase in compressive strength about 6.4%, 9.3%, and 8.2% for 1:3, 1:4 and 1:5 with different W/B ratios for 28 days is reported. Based on the investigational results, the coefficients of strength for various relationships proposed by different researchers have been calculated for the binder: sand ratio as 1:3 and 28 days curing period. Various relationships, including Abraham, Feret, Singh, and Bolomey law are used to validate the mixes of the PSCBA blended cement for different water-to-binder ratios and different curing periods. A novel relation has been developed through the extension of studies to forecast the compressive strength of PSCBA blended mortar mixes with various W/B ratios for various curing times.