Influence of synthesized nanomaterials in the strength and durability of cementitious composites
Source abstract
Abstract
The development of high-performance materials has been prompted by a constantly expanding infrastructure with complex technical constraints. Performance modification of cement composites using nanoparticles has been thoroughly researched to address demands in the construction industry. This cutting-edge review examines the various parameters of cement composites, such as fresh properties, mechanical properties, and durability characteristics that can be improved using synthesized nanomaterials such as nano-SiO2, nano-Al2O3, graphene oxide, and carbon nanotubes, as well as their inherent limitations. Based on the detailed review, the ideal replacement levels of nano-SiO2 (1–4 wt%), nano-Al2O3 (1–3 wt%), graphene oxide (0.05–0.1 wt%), and carbon nanotubes (0.1–0.5 wt%) can be recommended for the practical applications. It has been noted that the addition of synthesized nanomaterials tends to lower the workability of cement composites. However, nanoalumina, graphene oxide, nano-silica, and carbon nanotubes improve mechanical qualities such as compressive strength, flexural strength, and resistance to abrasion of the blended cementitious system at an optimum replacement level. Similarly, resistance against chemical attacks was imporved with the addition nano-silica, while the addition of graphene oxide in cement is more effective against chloride migration and fire exposure. The overall effect of synthesized nanomaterials is also compared in the study.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. P.K. Mehta, P.J.M. Monteiro, Concrete: microstructure, properties, and materials, McGraw-Hill Education, 2014.
2. Life cycle assessment of a cement plant in Naypyitaw, Myanmar
3. Shared socioeconomic pathways and long-term GHG mitigation towards 2050 in Thailand cement industry
4. Emission reduction pathways for a sustainable cement industry in Myanmar10.1016/j.spc.2021.01.016 ↗
5. Shared socioeconomic pathways and long-term GHG mitigation towards 2050 in Thailand cement industry
6. Biomass ashes from agricultural wastes as supplementary cementitious materials or aggregate replacement in cement/geopolymer concrete: A comprehensive review
7. Sustainable use of palm oil fuel ash as a supplementary cementitious material: A comprehensive review
8. Incorporation of nano-materials in cement composite and geopolymer based paste and mortar – A review10.1016/j.conbuildmat.2017.04.206 ↗
9. A review on sustainable use of agricultural straw and husk biomass ashes: Transitioning towards low carbon economy10.1016/j.scitotenv.2022.156407 ↗
10. A Review of Nanomaterials in Civil
11. Rheological properties of cementitious composites with and without nano-materials: A comprehensive review10.1016/j.jclepro.2020.122701 ↗
12. Influence of hybrid graphene oxide/carbon nanotubes on the mechanical properties and microstructure of magnesium potassium phosphate cement paste10.1016/j.conbuildmat.2020.120449 ↗
13. Hybrid graphene oxide/carbon nanotubes reinforced cement paste: An investigation on hybrid ratio10.1016/j.conbuildmat.2020.119815 ↗
14. An intensive review on the role of graphene oxide in cement-based materials10.1016/j.conbuildmat.2019.117939 ↗
15. Functional micro-concrete: The incorporation of zeolites and inorganic nano-particles into cement micro-structures10.1023/A:1006767809807 ↗
16. Study and application of nano - materials in concrete
17. Chemical effect of nano-alumina on early-age hydration of Portland cement10.1016/j.cemconres.2018.11.007 ↗
18. Effect of Nano Silica on the Compressive Strength of Concrete
19. High-performance nanostructured materials for construction
20. Silicon Dioxide (SiO2) Nanoparticles – Properties & Applications
21. Influence of Incorporation of Colloidal Nano-Silica on Behaviour of Concrete10.1007/s40996-020-00382-0 ↗
22. The effect of nanosilica addition on flowability, strength and transport properties of ultra high performance concrete10.1016/j.matdes.2014.02.051 ↗
23. Durability properties of high volume fly ash concrete containing nano-silica10.1617/s11527-014-0329-0 ↗
24. Use of nano-silica to reduce setting time and increase early strength of concretes with high volumes of fly ash or slag10.1016/j.conbuildmat.2011.11.013 ↗
25. Investigations on the development of the permeability properties of binary blended concrete with nano-SiO2 particles10.1177/0021998310389091 ↗
26. Influence of nano-SiO2 on properties of fresh and hardened high performance concrete: A state-of-the-art review10.1016/j.conbuildmat.2017.05.059 ↗
27. Nano-SiO2 contribution to mechanical, durability, fresh and microstructural characteristics of concrete: A review10.1016/j.conbuildmat.2018.05.266 ↗
28. Effect of nano-silica in concrete; a review
29. Properties of concrete incorporating nano-silica10.1016/j.conbuildmat.2012.06.044 ↗
30. Effects of nano-SiO2 and different ash particle sizes on sludge ash-cement mortar10.1016/j.jenvman.2007.03.036 ↗
31. A study on the effect of nano silica on compressive strength of high volume fly ash mortars and concretes10.1016/j.matdes.2014.04.025 ↗
32. Mortars with nano-SiO2 and micro-SiO2 investigated by experimental design10.1016/j.conbuildmat.2010.01.012 ↗
33. Effect of nano-silica on chemical and volume shrinkage of cement-based composites10.1016/j.conbuildmat.2020.118529 ↗
34. Influence of different types of nano-SiO2 particles on properties of high-performance concrete10.1016/j.conbuildmat.2016.03.041 ↗
35. Investigations on the development of the permeability properties of binary blended concrete with nano-SiO2 particles10.1177/0021998310389091 ↗
36. Microstructural, thermal, physical and mechanical behavior of the self compacting concrete containing SiO2 nanoparticles10.1016/j.msea.2010.08.095 ↗
37. Exploitation of the nanowaste ceramic incorporated with nano silica to improve concrete properties10.1016/j.jksues.2020.06.007 ↗
38. Effect of Nano Silica De-agglomeration, and Methods of Adding Super-plasticizer on the Compressive Strength, and Workability of Nano Silica Concrete
39. Assessment of mechanical strength of nano silica concrete (NSC) subjected to elevated temperatures10.1108/JSFE-10-2017-0041 ↗
40. SCC modification by use of amorphous nano-silica10.1016/j.cemconcomp.2013.09.001 ↗
41. Influence of hydrothermal nanosilica on mechanical properties of plain concrete10.4028/www.scientific.net/KEM.744.126 ↗
42. Effect of nano-silica addition into high volume fly ash–hydrated lime blended concrete10.1016/j.conbuildmat.2020.119205 ↗
43. Study on mechanical properties of ternary blended concrete containing two different sizes of nano-SiO210.1016/j.compositesb.2018.11.136 ↗
44. Abrasion resistance of concrete containing nano-particles for pavement10.1016/j.wear.2005.08.006 ↗
45. Strength, elastic and microstructural properties of SCCs’ with colloidal nano silica addition10.1016/j.conbuildmat.2017.10.041 ↗
46. Impact of nanosilica size and surface area on concrete properties
47. Influence of incorporation of colloidal nano-silica on behaviour of concrete10.1007/s40996-020-00382-0 ↗
48. Strength, elastic and microstructural properties of SCCs’ with colloidal nano silica addition10.1016/j.conbuildmat.2017.10.041 ↗
49. Experimental analysis of mechanical properties on concrete with nano silica additive10.4028/www.scientific.net/JNanoR.57.93 ↗
50. Chloride penetration, water absorption and electrical resistivity of high performance concrete containing nano silica and silica fume
51. Evaluation of the mechanical properties and durability of cement mortars containing nanosilica and rice husk ash under chloride ion penetration10.1016/j.conbuildmat.2015.01.045 ↗
52. Effect of nano-silica on the mechanical and transport properties of lightweight concrete10.1016/j.conbuildmat.2015.02.026 ↗
53. Assessment of mechanical strength of nano silica concrete (NSC) subjected to elevated temperatures10.1108/JSFE-10-2017-0041 ↗
54. Influence of nanosilica on mechanical and durability properties of concrete
55. Durability performances of concrete with nano-silica10.1016/j.conbuildmat.2014.10.014 ↗
56. Properties of concrete incorporating nano-silica10.1016/j.conbuildmat.2012.06.044 ↗
57. Chloride induced corrosion durability of high volume fly ash concretes containing nano particles10.1016/j.conbuildmat.2015.09.030 ↗
58. Synergistic cementing efficiencies of nano-silica and micro-silica in carbonation resistance and sorptivity of concrete
59. Development of high performance concrete using industrial waste materials and nano-silica10.1016/j.jmrt.2020.04.067 ↗
60. Influence of nano-SiO 2 and microsilica on concrete performance
61. Chloride penetration, water absorption and electrical resistivity of high performance concrete containing nano silica and silica fume
62. Influence of different types of nano-SiO2 particles on properties of high-performance concrete10.1016/j.conbuildmat.2016.03.041 ↗
63. Exploitation of the nanowaste ceramic incorporated with nano silica to improve concrete properties10.1016/j.jksues.2020.06.007 ↗
64. Study on frost resistance of nano SiO2 cement concrete10.4028/www.scientific.net/AMM.198-199.48 ↗
65. Effect of nano-particles on durability of fiber-reinforced concrete pavement10.1016/j.conbuildmat.2013.07.037 ↗
66. The effects of nano-silica and nano-alumina on frost resistance of normal concrete10.1016/j.conbuildmat.2013.07.088 ↗
67. Study of durability of Portland cement mortars blended with silica nanoparticles10.1016/j.conbuildmat.2014.12.074 ↗
68. The effects of nano- and micro-particle additives on the durability and mechanical properties of mortars exposed to internal and external sulfate attacks10.1016/j.rinp.2017.02.009 ↗
69. Combined effects of micro-silica and nano-silica on durability of mortar10.1016/j.conbuildmat.2017.09.105 ↗
70. Effects of incorporating nanosilica on carbonation of cement paste10.1007/s10853-015-8910-7 ↗
71. Durability studies of nano-engineered fly ash concrete10.1016/j.conbuildmat.2018.11.022 ↗
72. Synergistic cementing efficiencies of nano-silica and micro-silica in carbonation resistance and sorptivity of concrete
73. Effects of incorporating nanosilica on carbonation of cement paste10.1007/s10853-015-8910-7 ↗
74. Mechanical properties and durability of concrete specimens containing nano silica in sulfuric acid rain condition10.1016/j.conbuildmat.2018.01.137 ↗
75. Erosion resistance of high-strength concrete containing forta-ferro fibers against sulfuric acid attack with an optimum design10.1016/j.conbuildmat.2017.07.180 ↗
76. Effect of nanosilica particle size on the water permeability, abrasion resistance, drying shrinkage, and repair work properties of cement mortar containing nano-SiO210.1155/2017/4213690 ↗
77. Investigation of mechanical and physical properties of mortars containing silica fume and nano-SiO2
78. Effect of nano-silica on chemical and volume shrinkage of cement-based composites10.1016/j.conbuildmat.2020.118529 ↗
79. Performance of nano-Silica modified high strength concrete at elevated temperatures10.1016/j.conbuildmat.2014.06.026 ↗
80. Mechanical properties and microstructure of basalt fibre and nano-silica reinforced recycled concrete after exposure to elevated temperatures10.1016/j.conbuildmat.2020.118561 ↗
81. Exploitation of the ceramic wastes for the extraction of nano aluminum oxide powder10.1016/j.jiec.2013.12.063 ↗
82. The Global Flow of Aluminum From 2006 Through 2025 Open-File Report 2010-1256, Science for a Changing
83. Chemical effect of nano-alumina on early-age hydration of Portland cement10.1016/j.cemconres.2018.11.007 ↗
84. Ultra-high strength cement-based composites designed with aluminum oxide nano-fibers10.1016/j.conbuildmat.2019.05.175 ↗
85. Improvement compressive strength of concrete in different curing media by Al2O3 nanoparticles10.1016/j.msea.2010.09.098 ↗
86. The effect of nano-γAl2O3 additive on early hydration of calcium aluminate cement10.1016/j.conbuildmat.2017.10.071 ↗
87. Effects of nano-SiO2 and nano-Al2O3 on mechanical and durability properties of cement-based materials: A comparative study
88. Mechanical properties of fiber and nano-Al2O3 reinforced magnesium phosphate cement composite10.1016/j.conbuildmat.2020.121861 ↗
89. Behavior of magnetic concrete incorporated with Egyptian nano alumina10.1016/j.conbuildmat.2017.06.022 ↗
90. An innovative technique for internal curing of concrete with brick aggregate, nanoparticles of Al2O3 and rubber latex10.1007/s41062-021-00673-z ↗
91. Mechanical and Durability Characteristics of TiO2and Al2O3Nanoparticles with Sisal Fibers10.1155/2022/2813205 ↗
92. Single and combined effects of nano-SiO2, nano-Al2O3 and nano-TiO2 on the mechanical, rheological and durability properties of self-compacting mortar containing fly ash10.1016/j.conbuildmat.2015.03.006 ↗
93. The effects of nano-silica and nano-alumina on frost resistance of normal concrete10.1016/j.conbuildmat.2013.07.088 ↗
94. Investigations on the preparation and mechanical properties of the nano-alumina reinforced cement composite10.1016/j.matlet.2005.08.061 ↗
95. Influence of nano-SiO2 and nano-Al2O3 additions on the shear strength and the bending moment capacity of RC beams10.1016/j.conbuildmat.2016.06.132 ↗
96. Improvement compressive strength of concrete in different curing media by Al2O3 nanoparticles10.1016/j.msea.2010.09.098 ↗
97. Effects of nano-SiO2 and nano-Al2O3 on mechanical and durability properties of cement-based materials: A comparative study
98. Mechanical and microstructural characterization of rice husk ash and Al2O3 nanoparticles modified cement concrete10.1016/j.conbuildmat.2020.119358 ↗
99. Performance of single and hybrid nanoparticles added concrete at ambient and elevated temperatures10.1016/j.conbuildmat.2020.118847 ↗
100. Physico-mechanical, microstructure characteristics and fire resistance of cement pastes containing Al2O3 nano-particles10.1016/j.conbuildmat.2015.05.036 ↗