journal article·2024-07Open access

Synergistic effects of recycled demolition waste and GGBS-FA based geopolymers on the mechanical properties and stabilization mechanism of high plasticity clay

Xiao-qing Yu, Miao Zhang, Chen-ye Li, Kimitoshi Hayano, Xin Kang

Abstract

Recycled demolition waste (RDW) and ground granulated blast furnace slag-fly ash-based geopolymer (GFG) are promising materials for treating high-plasticity clay (CH) in highway subgrades. However, the underlying synergistic stabilization mechanisms remain unclear. To elucidate the fundamental mechanisms governing post-treatment soil stabilization, a multi-scale laboratory investigation was undertaken. This investigation encompassed the evaluation of mechanical properties (compaction, California bearing ratio (CBR), and unconfined compressive strength (UCS)) to quantify the enhanced performance of the treated soil. Additionally, microstructural and mineralogical characterization was performed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), and atomic force microscopy (AFM) to elucidate the microscopic mechanisms responsible for this improvement. The results indicated that the addition of RDW led to a reduction in the optimum moisture content (OMC) while increasing the maximum dry density (MDD) of CH. Moreover, upon incorporating RDW-GFG, the mechanical properties of the cured soil exhibited significant improvement. Specifically, the addition of 25% RDW to CH resulted in a 184% increase in CBR and effective improvement in water stability (immersion swelling percentage is reduced). Furthermore, when 25% RDW and 15% GFG were added to CH, the UCS has increased significantly by 8 times. The addition of RDW effectively enhanced the particle size distribution, compacted the soil, thus increased the shear strength. The results from XRD and SEM analyses revealed that the inclusion of GFG could generate geopolymer cementitious bonding network in the soil matrix. These materials facilitated bonding between CH particles and RDW, filling the pores and densifying the overall structure, thus increasing its strength. The synergy of RDW-GFG substantially improved the highly plastic soil through physicochemical actions, markedly elevating both its strength and water stability. Consequently, the outcomes of this experimental study offer valuable insights for road engineering applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Mechanical properties and stabilization mechanism of steel slag-rice husk ash solidified high plasticity clay
2. Engineering properties of cement stabilized expansive clay soil10.2478/cee-2022-0031 ↗
3. Effect of lime filling on the compactibility of clay soils10.2478/cee-2022-0047 ↗
4. Chemically stabilized soft clays for road-base construction10.1061/(ASCE)MT.1943-5533.0001156 ↗
5. Cement hydration-based micromechanics modeling of the time-dependent small-strain stiffness of fly ash-stabilized soils10.1061/(ASCE)GM.1943-5622.0000552 ↗
6. Improving very high plastic clays with the combined effect of sand, lime, and polypropylene fibers10.3390/app12199924 ↗
7. Geopolymer, green alkali activated cementitious material: synthesis, applications and challenges10.1016/j.conbuildmat.2019.07.112 ↗
8. Construction and demolition waste generation and properties of recycled aggregate concrete: a global perspective10.1016/j.jclepro.2018.03.085 ↗
9. Study on carbon emission characteristics and emission reduction measures of lime production-a case of enterprise in the Yangtze River Basin10.3390/su151310185 ↗
10. The use of fine portions from construction and demolition waste for expansive soil stabilization: a review10.1007/s11709-022-0835-z ↗
11. Geotechnical characteristics of recycled crushed brick blends for pavement sub-base applications10.1139/t2012-041 ↗
12. Functional and structural parameters of a paved road section constructed with mixed recycled aggregates from non-selected construction and demolition waste with excavation soil10.1016/j.conbuildmat.2017.12.195 ↗
13. Strength and drainage characteristics of poor soils stabilized with construction demolition waste10.1007/s10706-020-01324-3 ↗
14. Utilization of recycled concrete aggregates for light-stabilization of clay soils10.1016/j.conbuildmat.2019.116792 ↗
15. Suitability of Brick Kila Waste as a Stabilizer for Clayey Soils
16. Physical properties and shear strength responses of recycled construction and demolition materials in unbound pavement base/subbase applications10.1016/j.conbuildmat.2014.02.025 ↗
17. Strength characteristics and micro-scale mechanism of high liquid limit clay treated by recycled construction and demolition wastes (CDW) Aggregates10.1016/j.conbuildmat.2022.127367 ↗
18. Sustainable utilization of red mud waste (Bauxite Residue) and slag for the production of geopolymer composites: a review
19. Physico-mechanical properties and micromorphological characteristics of graphene oxide reinforced geopolymer foam concrete
20. Large-strain strength of polymer-modified kaolinite and fly ash-kaolinite mixtures10.1061/(ASCE)GT.1943-5606.0002008 ↗
21. Experimental study on mechanical properties of fiber-reinforced and geopolymer-stabilized clay soil10.1016/j.conbuildmat.2020.121914 ↗
22. Effect of calcium content on soil stabilisation with alkaline activation10.1016/j.conbuildmat.2011.10.049 ↗
23. Effects of Portland cement on activation mechanism of class F fly ash geopolymer cured under ambient conditions10.1016/j.conbuildmat.2018.09.065 ↗
24. Influencing factors and mechanism analysis of strength development of geopolymer stabilized sludge
25. Evaluation of fly ash- and slag-based geopolymers for the improvement of a soft marine clay by deep soil mixing10.1016/j.sandf.2018.07.005 ↗
26. Strength and durability properties of expansive soil treated with geopolymer and conventional stabilizers10.1016/j.conbuildmat.2022.127078 ↗
27. Strength and durability characteristics of GGBS geopolymer stabilized black cotton soil
28. Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. ASTM D4318-17e1
29. Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer. ASTM D854-14
30. Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
31. Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3)). ASTM D698-12(2021)
32. Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) (Superseded). ASTM D2487-17
33. Effect of water addition, plasticizer and alkaline solution constitution on fly ash based geopolymer concrete performance10.1016/j.conbuildmat.2016.06.062 ↗
34. Influence of curing on the strength development of calcium-containing geopolymer mortar10.3390/ma6115069 ↗
35. Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils. ASTM D1883-16
36. Standard Test Method for Unconfined Compressive Strength of Cohesive Soil. ASTM D2166M-16
37. Unconfined compressive strength property and its mechanism of construction waste stabilized lightweight
38. Subgrade stabilization using rice husk ash-based geopolymer (GRHA) and cement Kiln Dust (CKD)
39. Experimental feasibility study of geopolymer as the next-generation soil stabilizer10.1016/j.conbuildmat.2013.06.017 ↗
40. Effects of Water Chemistry on Microfabric and Micromechanical Properties Evolution of Coastal Sediment: A Centrifugal Model Study10.1016/j.scitotenv.2022.161343 ↗
41. Synthesis and characterization of sustainable eco-friendly unburned bricks from slate tailings10.1016/j.jmrt.2021.07.071 ↗
42. Experimental study on endurance performance of lime and cement-treated cohesive soil10.1007/s12205-021-2154-7 ↗