Damage characteristics of hybrid fiber reinforced concrete under the freeze-thaw cycles and compound-salt attack
Source abstract
Abstract
This paper presents an experimental investigation on the damage characteristics and microstructures of hybrid fiber reinforced concrete (HFRC) subjected to the freeze-thaw(F-T)cycles and compound- salt attack. The effect of steel fiber content and steel-polypropylene fiber hybridization on the apparent morphology, mass loss, relative dynamic elastic modulus (RDEM), mechanical strengths in terms of compressive and flexural strengths were studied. The damage mechanism was explored based on an analysis of pore structures of specimens. The results showed that the F-T cycle has adverse effect on the physical and mechanical properties of specimens. The addition of fibers alleviates the damage degree of concrete, and the fiber hybridization shows more pronounced effect. Results from the porosity analysis indicate the pore sizes of 1.2HFRC are mainly distributed within 40 nm and those of OC are within 60 nm. The volume of larger pore size of 1.2HFRC increases less than the others after salt F-T cycles. Finally, based on Weibull distribution function, evolution equations for the salt-frozen damage of HFRC are developed by a combination of strength attenuation and RDEM degradation. The research results provide theoretical basis and reference for the practical application and building maintenance of fiber reinforced concrete.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Correlation between climate factors and vegetation cover in qinghai province, China
2. Comparison and selection of the durability evaluating parameters of concrete in saline soil region10.4028/www.scientific.net/AMR.919-921.1751 ↗
3. Investigation of damage behaviors of ECC-to-concrete interface and damage prediction model under salt freeze-thaw cycles10.1016/j.conbuildmat.2019.07.237 ↗
4. Research on corrosion damage and bearing characteristics of bridge pile foundation concrete under a dry-wet-freeze-thaw cycle10.1155/2021/8884396 ↗
5. Influence of freezing-induced damage on the carbonation rate of concrete10.1080/19648189.2016.1167781 ↗
6. A statistical evolution model of concrete damage induced by seawater corrosion10.3390/ma14041007 ↗
7. Experimental study on the influence of rubber content on chloride salt corrosion resistance performance of concrete10.3390/ma14164706 ↗
8. Deterioration of concrete under the coupling effects of freeze-thaw cycles and other actions: A review10.1016/j.conbuildmat.2021.126045 ↗
9. Composite salt corrosion deterioration characteristics and damage calculation models of concrete incorporated with corrosion inhibiting admixtures
10. Zla B., As A., Ww A., et al., Salt frost resistance and micro characteristics of polynary blended concrete using in frost areas. Cold Regions Science and Technology, 191.
11. Degradation mechanisms of cast-insitu concrete subjected to internal-external combined sulfate attack10.1016/j.conbuildmat.2020.118683 ↗
12. Experimental study on the mechanical properties of grouted rock bolts subjected to sulfate attack and freeze-thaw cycling10.1016/j.conbuildmat.2021.123391 ↗
13. Freeze thaw durability of air-entrained concrete under various types of salt lake brine exposure10.1680/jmacr.17.00247 ↗
14. Experimental study on the influence of rubber content on chloride salt corrosion resistance performance of concrete10.3390/ma14164706 ↗
15. Review on the deterioration and approaches to enhance the durability of concrete in the freeze-thaw environment10.1016/j.conbuildmat.2022.126371 ↗
16. Experimental study on mechanical and durability properties of glass and polypropylene fiber reinforced concrete10.1007/s12221-019-1028-9 ↗
17. Study on the durability and failure mechanism of concrete modified with nanoparticles and polypropylene fiber under freeze-thaw cycles and sulfate attack10.1016/j.coldregions.2021.103301 ↗
18. Effect of freeze-thaw cycles on strength and toughness properties of new generation 3D/4D/5D steel fiber-reinforced concrete
19. Durability of steel fiber-reinforced concrete containing SiO2 nano-particles10.3390/ma12132184 ↗
20. Influence of freeze-thaw cycles and sulfate corrosion resistance on shotcrete with and without steel fiber10.1016/j.conbuildmat.2016.06.100 ↗
21. High-performance fiber-reinforced concrete: a review10.1007/s10853-016-9917-4 ↗
22. Quantitative evaluation of the characteristics of air voids and their relationship with the permeability and salt freeze-thaw resistance of hybrid steel-polypropylene fiber-reinforced concrete composites10.1016/j.cemconcomp.2021.104292 ↗
23. Chloride diffusion behavior and microstructure of basalt-polypropylene hybrid fiber reinforced concrete in salt spray environment10.1016/j.conbuildmat.2022.126716 ↗
24. Deicer-Frost scaling of steel-polypropylene hybrid fiber reinforced concrete
25. Evaluation of the performance degradation of hybrid steel-polypropylene fiber reinforced concrete under freezing-thawing conditions10.1155/2020/8863047 ↗
26. Chloride diffusion property of hybrid basalt-polypropylene fiber-reinforced concrete in a chloride-sulphate composite environment under drying-wetting cycles10.3390/ma14051138 ↗
27. Effect of multiple ions on the degradation in concrete subjected to sulfate attack10.1016/j.conbuildmat.2020.119846 ↗
28. Effects of freeze-thaw damage on fracture properties and microstructure of hybrid fibers reinforced cementitious composites containing calcium carbonate whisker10.1016/j.conbuildmat.2021.123872 ↗
29. Quantitative evaluation of the characteristics of air voids and their relationship with the permeability and salt freeze-thaw resistance of hybrid steel-polypropylene fiber-reinforced concrete composites10.1016/j.cemconcomp.2021.104292 ↗
30. Chinese standard GB/T 50082–2009, Standard for test method of long-term performance and durability of ordinary concrete. Chinese standard Institution.
31. TC Powers. Resistance to weathering-freezing and thawing ASTM sp. Tech.publication. No. 169.
32. Verbeck C.J., Kiieger P., Studies of salt scaling of concrete. Highway Research Board Bul-letin, 1957.
33. Setzer M.J. Action of frost and deicing chemicals-basic phenomena and testing. FT Do C. Proceeding of the international workshop in the resistance of concrete toscaling due to freezing in the presence of deicing salt, Quebee, Canada, 1997, 3–22.
34. Chinese standard CECS 13–2009 2009, Standard test methods for fiber reinforced concrete. Chinese standard Institution.
35. Research on fractal characteristics of cement-based materials by nitrogen adsorption method10.4028/www.scientific.net/AMR.415-417.1545 ↗
36. Durability of concrete under sulfate attack exposed to freeze-thaw cycles10.1016/j.coldregions.2014.12.006 ↗
37. Theory of volume changes in hardened portland cement paste during freezing
38. A working hypothesis for further studies of frost resistance of concrete
39. Damage behaviors of self-compacting concrete and prediction model under coupling effect of salt freeze-thaw and flexural load10.1016/j.conbuildmat.2016.05.073 ↗
40. Micromechanical properties of GO-RC interface transition zone under Freeze-Thaw cycle
41. Investigation of microstructural damage in shotcrete under a freeze-thaw environment10.1016/j.conbuildmat.2015.02.042 ↗
42. Effects of low temperatures and cryogenic freeze-thaw cycles on concrete mechanical properties: A literature review10.1016/j.conbuildmat.2022.128287 ↗
43. The correlation between concrete strength and damage evolution in freeze-thaw cycles
44. ACI (American Concrete Institute), Building Code Requirements for Structural Concrete and Commentary, 2011, 318–11.
45. Ultrasound monitoring of setting and hardening process of ultra-high performance cementitious materials10.1016/j.ndteint.2009.10.006 ↗
46. Accelerated life testing of concrete based on three-parameter weibull stochastic approach10.1007/s12205-019-0995-0 ↗
47. Effect of sodium gluconate on dispersion of polycarboxylate superplasticizer with different grafting density in side chain10.1016/j.jiec.2017.06.032 ↗
48. Load-based lower neck injury criteria for females from rear impact from cadaver experiments10.1007/s10439-016-1773-5 ↗
49. Damage to recycled concrete with different aggregate substitution rates from the coupled action of freeze-thaw cycles and sulfate attack10.1016/j.conbuildmat.2019.06.060 ↗