Enhancing bonding behavior between carbon fiber-reinforced polymer plates and concrete using carbon nanotube reinforced epoxy composites
Source abstract
Abstract
Externally bonded carbon fiber reinforced polymer (CFRP) composites have been widely used as repairing or strengthening materials for deteriorated reinforced concrete (RC) structures. This study discusses whether carbon nanotube (CNT) can be used as an additive to enhance bonding strength between concrete and CFRP. In this study, two CNT types: single walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs), were mixed with two different types of epoxies. CNTs were added at 0.25%, 0.5%, and 1.00% by weight of epoxy to obtain the optimal performance. Single-shear test were conducted to investigate bonding behavior including bond strength, ultimate slip, effective bond length, bond stress-slip relationship, interfacial fracture energy, and crack formation between CFRP plate and concrete. The results showed that epoxy modified by 0.5% SWCNTs and 1.0% MWCNTs by weight of epoxy enhance the ultimate load and slip, bond strength, and interfacial fracture energy when compared to plain epoxy. However, high density epoxy modified with SWCNTs/MWCNTs showed diminished bonding properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Smart Materials for Construction · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Teng · 2002
2. Behaviour and strength of FRP-strengthened RC structures: a state-of-the-art review10.1680/stbu.2003.156.1.51 ↗
3. Repair of heat-damaged RC shallow beams using advanced composites10.1617/s11527-007-9238-9 ↗
4. Behavior of full-scale RC T-beams strengthened in shear with externally bonded FRP sheets10.1016/j.conbuildmat.2010.11.102 ↗
5. Flexure strengthening of lightweight reinforced concrete beams using carbon fibre-reinforced polymers10.1080/15732479.2012.757790 ↗
6. Review of concrete structures strengthened with FRP against impact loading
7. Flexural strength recovery of heat-damaged RC beams using carbon nanotubes modified CFRP10.1016/j.conbuildmat.2017.04.047 ↗
8. Experimental study of flexural behaviour of RC beams strengthened by longitudinal and U-shaped basalt FRP sheet10.1016/j.compositesb.2017.09.053 ↗
9. Performance and failure analysis of carbon fiber-reinforced polymer (CFRP) strengthened reinforced concrete (RC) beams10.1007/s42452-019-1675-x ↗
10. Performances, challenges and opportunities in strengthening reinforced concrete structures by using FRPs–a state-of-the-art review10.1016/j.engfailanal.2020.104480 ↗
11. Delamination failure in concrete beams retrofitted with a bonded plate10.1061/(ASCE)0899-1561(2001)13:2(106) ↗
12. Intermediate crack-induced debonding in RC beams and slabs10.1016/S0950-0618(03)00043-6 ↗
13. Experimental study on RC beams strengthened with carbon and glass fiber sheets10.4186/ej.2009.13.2.9 ↗
14. Cyclic flexural performance of fire-damaged reinforced concrete beams strengthened with carbon fiber-reinforced polymer plates
15. Bond properties between carbon fibre-reinforced polymer plate and fire-damaged concrete10.1016/j.ijadhadh.2019.102485 ↗
16. Bond performance of NSM CFRP strips embedded in concrete using direct pull-out testing with cementitious adhesive made with graphene oxide10.1016/j.conbuildmat.2017.12.050 ↗
17. On the strength prediction of adhesively bonded FRP-steel joints using cohesive zone modelling10.1016/j.tafmec.2017.06.022 ↗
18. Fracture characterization of concrete/epoxy interface affected by moisture10.1016/j.mechmat.2010.09.001 ↗
19. Epoxy interlocking: a novel approach to enhance FRP-to-concrete bond behavior10.1016/j.conbuildmat.2018.10.183 ↗
20. Bond properties of FRP-concrete interface with nano-modified epoxy resin under wet-dry cycles10.1007/s12205-016-0921-7 ↗
21. Mechanical properties of FRP-strengthened concrete at elevated temperature10.1016/j.conbuildmat.2016.12.148 ↗
22. Experimental study of retrofitted cracked concrete with FRP and nanomodified epoxy resin10.1061/(ASCE)MT.1943-5533.0001810 ↗
23. A rapid field test method to evaluate concrete composite adhesive bonding10.1504/IJMPT.2003.003552 ↗
24. The effect of curing conditions on the properties of silica modified glass fiber reinforced epoxy composite10.1177/0731684407069950 ↗
25. Curing kinetics and effects of fibre surface treatment and curing parameters on the interfacial and tensile properties of hemp/epoxy composites10.1163/016942409X12526743387962 ↗
26. Effect of curing conditions on strength development in an epoxy resin for structural strengthening10.1016/j.compositesb.2011.07.006 ↗
27. New epoxy anchor for better bonding between FRP sheets and concrete10.1016/j.conbuildmat.2020.118628 ↗
28. Durability of CFRP-wrapped concrete exposed to hydrothermal environment10.1007/s40999-017-0159-x ↗
29. Environmental durability of externally bonded FRP materials intended for repair of concrete structures10.1016/j.conbuildmat.2010.11.096 ↗
30. A critical review and assessment for FRP-concrete bond systems with epoxy resin exposed to chloride environments10.1016/j.compstruct.2019.111372 ↗
31. Hybrid effect of carbon nanotubes and polypropylene fibers on mechanical properties and fire resistance of cement mortar10.1016/j.conbuildmat.2020.122189 ↗
32. On the mechanical characterization of carbon nanotube reinforced epoxy adhesives10.1016/j.matdes.2014.02.034 ↗
33. Effects of surfactant treatment on mechanical and electrical properties of CNT/epoxy nanocomposites10.1016/j.compositesa.2008.09.009 ↗
34. Effects of carbon nanotube enrichment of epoxy resins on hybrid FRP–FR confinement of concrete10.1016/j.compositesb.2013.09.044 ↗
35. Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites–a comparative study10.1016/j.compscitech.2005.04.021 ↗
36. Investigation of nanotube length effect on the reinforcement efficiency in carbon nanotube based composites10.1016/j.compstruct.2010.02.018 ↗
37. Mechanical properties of multi-walled carbon nanotube/epoxy polysulfide nanocomposite10.1016/j.matdes.2013.02.039 ↗
38. Mechanical properties of multi-walled carbon nanotube/epoxy composites10.1016/j.matdes.2010.04.018 ↗
39. Smart properties of carbon nanotube-epoxy composites
40. Using carbon nanotubes to improve strengthening efficiency of carbon fiber/epoxy composites confined RC columns10.1016/j.compstruct.2015.08.108 ↗
41. Effect of carbon nanotubes on strengthening of RC beams retrofitted with carbon fiber/epoxy composites10.1016/j.matdes.2015.09.166 ↗
42. Effect of using carbon nanotube modified epoxy on bond–slip behavior between concrete and FRP sheets10.1016/j.conbuildmat.2015.12.183 ↗
43. Limiting shear creep of epoxy adhesive at the FRP–concrete interface using multi-walled carbon nanotubes10.1016/j.ijadhadh.2011.09.006 ↗
44. Enhancement of mechanical behavior of resin matrices and fiber reinforced polymer composites by incorporation of multi-wall carbon nanotubes10.1016/j.polymertesting.2021.107077 ↗
45. SIKA, CarboDur® S-Pultruded Carbon Fibre Plates for Structural Strengthening as Part of the Sika® CarboDur® System: Product data sheet, vol. Version 05.02, 2020.
46. SIKA, Sikadur®-30-Thixotropic epoxy adhesive for bonding reinforcement: Product data sheet, vol. Version 02.02, 2017.
47. SIKA, Sikadur®-330. 2-component epoxy impregnation resin: Product data sheet, vol. Version 03.01, 2020.
48. Anchorage strength models for FRP and steel plates bonded to concrete10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
49. Development of the nonlinear bond stress–slip model of fiber reinforced plastics sheet–concrete interfaces with a simple method10.1061/(ASCE)1090-0268(2005)9:1(52) ↗
50. Effect of concentration and surface modification of single walled carbon nanotubes on mechanical properties of epoxy composites10.1007/s12221-014-2169-5 ↗
51. Enhancement of mechanical performance of epoxy/carbon fiber laminate composites using single-walled carbon nanotubes10.1016/j.compscitech.2011.06.015 ↗
52. Carbon fiber/epoxy composite property enhancement through incorporation of carbon nanotubes at the fiber–matrix interphase–Part I: the development of carbon nanotube coated carbon fibers and the evaluation of their adhesion10.1016/j.compositesa.2012.02.016 ↗
53. Synthesis, morphology and physical properties of multi-walled carbon nanotube/biphenyl liquid crystalline epoxy composites10.1016/j.carbon.2011.09.051 ↗
54. Characterization of concrete surface roughness and its relation to adhesion in repair systems10.1016/j.matchar.2005.10.014 ↗
55. Investigation of crack resistance in single walled carbon nanotube reinforced polymer composites based on FEM
56. Effect of CNT functionalization on crack resistance of a carbon/epoxy composite at a cryogenetic temperature10.1016/j.compositesa.2012.04.001 ↗
57. Influence of roughness on shear bonding performance of CFRP-concrete interface10.3390/ma11101875 ↗
58. Effect of concrete surface roughness on the bonding performance between the CFRP and concrete
59. Bond strength and effective bond length of FRP sheets/plates bonded to concrete considering the type of adhesive layer10.1016/j.compositesb.2013.10.075 ↗
60. Extraction and analysis of bond-slip characteristics in deteriorated FRP-to-concrete joints using a mechanics-based approach10.1061/(ASCE)MT.1943-5533.0001881 ↗
61. Transfer lengths and bond strengths for composites bonded to concrete10.1061/(ASCE)1090-0268(1999)3:4(153) ↗
62. Determination of the bond–slip behavior of CFRP-to-steel bonded interfaces using digital image correlation10.1177/0731684416651342 ↗
63. Carbon nanotubes and carbon nanofibers for enhancing the mechanical properties of nanocomposite cementitious materials10.1061/(ASCE)MT.1943-5533.0000266 ↗
64. Experimental study on FRP-to-concrete bonded joints10.1016/j.compositesb.2004.06.001 ↗
65. American Society of Testing and Materials · 2021