Experimental study on flexural behaviors of FRP and steel bars hybrid reinforced concrete beams
Source abstract
Abstract
To investigate the flexural behaviors of Fiber-reinforced polymer (FRP) and steel bars hybrid reinforced concrete (Hybrid-RC) beams, twelve beams were designed and manufactured, including one steel bars reinforced concrete (Steel-RC) beam, one GFRP reinforced concrete (GFRP-RC) beam, and ten Hybrid-RC beams. The effects of FRP bars type, concrete strength, and effective reinforcement ratio on the flexural behaviors of Hybrid-RC beams were studied through experiments and compared with the predicted results of theoretical models. The research results indicated that when the reinforcement area and service load were the same, the crack width, deflection, ultimate bearing capacity, and ductility of Hybrid-RC beams were between Steel-RC and GFRP-RC beam. The flexural bearing capacity of Hybrid-RC beams might also be increased by using FRP bars with a higher elastic modulus or by increasing the effective reinforcement ratio; however, it would reduce the ductility of the beams. In contrast, increasing the concrete strength could simultaneously increase the Hybrid-RC beams’ flexural bearing capacity and ductility. The equation for calculating the stress of FRP bars in the ultimate state of Hybrid-RC beams was obtained by fitting regression based on the test results, and the equation’s predicted results and test results showed good agreement. In addition, the predicted results of the flexural behaviors of Hybrid-RC beams using the theoretical model agreed with the experimental results.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Experimental tests of two span continuous concrete beams reinforced with hybrid GFRP-Steel bars10.1016/j.istruc.2022.12.055 ↗
2. Bond strength between corroded steel reinforcement and recycled aggregate concrete10.1016/j.istruc.2019.02.001 ↗
3. A comparative study of the flexural performance of hybrid-reinforced (glass fiber reinforced polymer and steel bars) concrete beams before and after exposure to chloride environment10.1177/13694332211072322 ↗
4. Nonlinear analysis of flexural performance of reactive powder concrete beams reinforced with hybrid GFRP and steel bars
5. Experimental and numerical parametric study on flexural behavior of concrete beams reinforced with hybrid combinations of steel and BFRP bars10.1016/j.compstruct.2022.116230 ↗
6. Comparison of flexural behaviors between plain and steel-fiber-reinforced concrete beams with hybrid GFRP and steel bars10.1016/j.istruc.2022.06.037 ↗
7. Flexural Behavior of Concrete Beams Reinforced with Hybrid (GFRP and Steel) Bars
8. Experimental study of hybrid FRP reinforced concrete beams10.1016/j.engstruct.2010.08.028 ↗
9. Flexural behaviour of concrete beams internally reinforced with GFRP rods and steel rebars
10. Structural Performances of Concrete Beams with Hybrid (Fiber-Reinforced Polymer-Steel) Reinforcements10.1061/(ASCE)1090-0268(2002)6:2(133) ↗
11. Yoon Y.S., Yang J.M., Min K.H., Shin H.O. Flexural strength and deflection characteristics of high-strength concrete beams with hybrid FRP and steel bar reinforcement. Genetics 2011.
12. Structural performance and serviceability of concrete beams reinforced with hybrid (GFRP and steel) bars10.1016/j.conbuildmat.2015.08.063 ↗
13. Flexural behaviors of hybrid concrete beams reinforced with BFRP bars and steel bars10.1016/j.conbuildmat.2015.03.113 ↗
14. Ductility Estimation for Flexural Concrete Beams Longitudinally Reinforced with Hybrid FRP–Steel Bars
15. Design Propositions for Hybrid FRP-Steel Reinforced Concrete Beams
16. Flexural capacity and design of hybrid FRP-steel-reinforced concrete beams10.1177/1369433219894236 ↗
17. Experimental study on the flexural behavior of concrete beams reinforced with bundled hybrid steel/FRP bars10.1016/j.engstruct.2019.109443 ↗
18. Experimental study of concrete beams reinforced with hybrid bars (SFCBs and BFRP bars)10.1617/s11527-020-01514-8 ↗
19. Experimental study of flexural behavior and serviceability of hybrid concrete beams reinforced by steel and G/BFRP bars. IOP conference series
20. Flexural behavior and serviceability of concrete beams hybrid-reinforced with GFRP bars and steel bars10.1016/j.compstruct.2019.111772 ↗
21. Effect of reinforcement ratio on the flexural performance of hybrid FRP reinforced concrete beams10.1016/j.compositesb.2016.09.054 ↗
22. Experimental and analytical study of flexural performance of concrete beams reinforced with hybrid of GFRP and steel rebars10.1016/j.engfailanal.2022.106397 ↗
23. CNR. CNR DT 203/2006. Guide for design and construction of concrete structures reinforced with fiber reinforced polymer bars. Rome, Italy: Italian National Research Council, 2006.
24. CSA. CSA S806–02. Design and construction of building component with fiber-reinforced polymers. Rexdale, Toronto: Canadian Standard Association (CSA), 2002.
25. ACI. ACI 440.1R-06. Guide for the design and construction of structural concrete reinforced with FRP bars. American Concrete Institute, Farmington Hills, MI, USA, 2006.10.1061/40753(171)158 ↗
26. ACI. ACI 440.1R-15. Guide for the Design and-Construction of Structural Concrete Reinforced with Fiber-Reinforced Polymer (FRP) Bars. American Concrete Institute, Farmington Hills, MI, USA, 2015.
27. GB. GB 50608–2010. Technical Code for Infrastructure Application of FRP Composites. Beijing, China: China Planning Press (In Chinese), 2010.
28. Finite element modeling of reinforced concrete beams with a hybrid combination of steel and aramid reinforcement10.1016/j.matdes.2014.10.004 ↗
29. GB/T 50081–2019. Standard for test methods of concrete physical and mechanical properties. Peking: China Architecture & Building Press, 2019. (In Chinese).
30. COMITE EURO-INTERNATIONAL DB. CEB-FIP Model Code 1990. Thomas Telford, London, 1991.
31. GB/T 50152–2012. Standard for test method of concrete structures. Peking: China Architecture & Building Press, 2012. (In Chinese).
32. CSA. CSA-S806–12. Design and construction of building components with fibre-reinforced polymers. Ontario (Canada):Canadian Standards Association, 2012.
33. Xiaoliang Z. Flexural and Shear Behavior of Concrete Beams Reinforced with Hybrid (FRP and Steel) Bars. Tongji University Doctoral Dissertation (In Chinese), 2010.
34. Flexural behavior of hybrid FRP/steel reinforced concrete beams10.1016/j.compstruct.2015.03.073 ↗
35. Flexural Behavior and Design of Steel-GFRP Reinforced Concrete Beams
36. Integrated High-Performance Concrete Beams Reinforced with Hybrid BFRP and Steel Bars10.1061/(ASCE)ST.1943-541X.0003207 ↗
37. Load-Deflection Behavior of Over- and Under-Reinforced Concrete Beams with Hybrid FRP-Steel Reinforcements10.3390/ma14185341 ↗
38. Equivalent Moment of Inertia Based on Integration of Curvature
39. Reevaluation of Deflection Prediction for Concrete Beams Reinforced with Steel and Fiber Reinforced Polymer Bars
40. CAN/CSA S806–12. Design and construction of building structures with fiber reinforced polymers. Rexdale, Toronto: Canadian Standard Association (CSA), 2012.
41. Another Look at Cracking and Crack Control in Reinforced Concrete
42. A Recalibration of the Crack Width Bond-Dependent Coefficient for GFRP-Reinforced Concrete
43. JSCE. Recommendation for design and construction of concrete structures using continuous fiber reinforcing materials. Concrete engineering series 23, A. Machida, ed. Tokyo, 1997.
44. Gergely P., Lutz L. Maximum crack width in reinforced concrete flexural members, causes, mechanisms and control of cracking in concrete. Detroit: American Concrete Institute, 1968.
45. Haiqun H. Experimental study of steel-GFRP reinforced concrete beam (master degree thesis). Shanghai: Tongji University, 2004. (In Chinese).
46. GB50010–2010. Code for design of concrete structures. Beijing: China Building Industry Press, 2010. (In Chinese).
47. Experiment and Calculation of Crack Width of Concrete Beams Reinforced with Hybrid (FRP and Steel) Bars. China Journal of Highway and Transport
48. CSA. Canadian highway bridge design code:CSA-S6–10. Mississauga:Canadian Standards Association, 2010.
49. The concept of the overall performance factor in rectangular-section reinforced concrete members
50. Naaman A., Jeong S. Structural Ductility of Concrete Beams Prestressed with FRP Tendons, Non-Metallic (FRP) Reinforcement for Concrete Structures. Proceedings of the Second International RILEM Symposium (FRPRCS-2), E & FN Spon, London, 1995.
51. Ductility and Deformability of RPC Beams Prestressed with CFRP Tendons